PlainWorker
Employers › OH

Manufacturing · BALTIC, OH

POLYFLEX DIVISION OF FLEX TECHNOLOGIES

OSHA records show a relatively clean safety record: 2 violations across 2 inspections — below the Manufacturing industry average for penalties.

2
OSHA inspections
2
Violations cited
$800
OSHA penalties

POLYFLEX DIVISION OF FLEX TECHNOLOGIES in BALTIC, OH has been the subject of 2 OSHA workplace inspections and 2 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $800. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

POLYFLEX DIVISION OF FLEX TECHNOLOGIES has been inspected 2 times by OSHA over 5 years. These inspections resulted in 2 violations, averaging 1.0 violations per inspection. Of these, 1 were classified as serious — indicating hazards that could cause death or serious harm. Compared to the Manufacturing industry average of 3 inspections per employer, POLYFLEX DIVISION OF FLEX TECHNOLOGIES has been inspected fewer frequently.

1.0
violations per inspection
50.0%
of violations were serious
0.05×
Manufacturing industry-avg penalty

How this employer compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows POLYFLEX DIVISION OF FLEX TECHNOLOGIES sits below the Manufacturing per-employer average, a comparatively lighter enforcement footprint than its peers.

Source U.S. Department of Labor — OSHA enforcement extracts As of 2026

What the Data Says About POLYFLEX DIVISION OF FLEX TECHNOLOGIES

The federal enforcement record for POLYFLEX DIVISION OF FLEX TECHNOLOGIES in BALTIC, OH includes 2 OSHA inspections and 2 violations, translating to 1.00 violations per inspection. Of those violations, 1 (50.0%) were classified as serious, 0 (0.0%) as willful, and 0 (0.0%) as repeat. Serious violations denote hazards likely to cause death or serious physical harm; willful and repeat categories indicate intentional disregard or recurrence of previously cited hazards.

OSHA assessed $11,200 in initial penalties against this employer, later adjusted to a current total of $800 — a 92.9% reduction. Average penalty per inspection works out to $400. Against the Manufacturing industry average of $16,300 per employer, this record runs below peers.

Inspection activity spans from 2015-01-21 to 2020-02-25, a window of roughly 5 years. This record draws directly from the U.S. Department of Labor's public enforcement data at data.dol.gov. Penalty amounts reflect final adjudicated figures after any settlement, informal conference, or formal contest. Workers, journalists, and researchers can use these figures to compare this employer's compliance posture against industry peers and to identify workplaces with elevated safety risks or repeat non-compliance.

OSHA Inspection History

Total Inspections
2
First Inspection
2015-01-21
Last Inspection
2020-02-25
Inspection Span
5 years
Violations per Inspection
1.0
Avg Penalty per Inspection
$400
Industry Avg per Inspection
$6,447

Violation Breakdown

1
Serious
50.0% of total
0
Willful
0.0% of total
0
Repeat
0.0% of total
1
Other-Than-Serious
50.0% of total

Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Penalty Analysis

Initial Penalty Assessed
$11,200
Current Penalty Amount
$800
Penalty Reduction
92.9%

Penalties were reduced by $10,400 from the initial assessment of $11,200. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How POLYFLEX DIVISION OF FLEX TECHNOLOGIES compares to the Manufacturing sector, which has 14,000 employers tracked by PlainWorker.

Metric POLYFLEX DIVISION OF FLEX TECHNOLOGIES Industry Avg
Inspections 2 2.5
Violations 2 8.0
Total Penalty $800 $16,300
Avg Penalty per Inspection $400 $6,447
View all 14,000 employers in Manufacturing →

Explore related data

Manufacturing safety record →

Inspections, violations, and penalties across the Manufacturing sector.
OH enforcement →

Top violators and statewide OSHA & WHD totals for OH.
Most-penalized employers →

The 100 employers carrying the heaviest OSHA penalties nationwide.

Workplace Safety Guides

Understanding OSHA Inspections

What triggers an inspection and what to expect during the process
How to Read an OSHA Inspection Report

Decode violation types, penalty amounts, and compliance outcomes
Your Rights Under OSHA

Know your workplace safety rights and how to exercise them
Wage Theft Explained

Common forms of wage theft and how to recover unpaid wages
Most Dangerous Industries

Which industries face the highest rates of violations and penalties
Industries With Most OSHA Violations

Data-driven breakdown of violation leaders by sector

Nearby & Similar Employers in Manufacturing

MDLG, INC.
PHENIX CITY, AL
9 inspections $2.71M
THE GOODYEAR TIRE & RUBBER COMPANY
DANVILLE, VA
31 inspections $2.62M
Romark Laboratories
TAMPA, FL
0 inspections $0
NOX US, LLC
FOSTORIA, OH
10 inspections $1.54M
FLORENCE HARDWOODS, LLC
FLORENCE, WI
5 inspections $1.42M

Compare POLYFLEX DIVISION OF FLEX TECHNOLOGIES vs MDLG, INC. side-by-side →

Frequently Asked Questions

Is POLYFLEX DIVISION OF FLEX TECHNOLOGIES safe to work at? ▼
Based on OSHA records, POLYFLEX DIVISION OF FLEX TECHNOLOGIES's workplace safety record is relatively clean, with fewer violations than typical. The employer has 2 violations across 2 inspections, including 1 serious violations. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does POLYFLEX DIVISION OF FLEX TECHNOLOGIES have? ▼
POLYFLEX DIVISION OF FLEX TECHNOLOGIES has 2 OSHA violations on record, including 1 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $800.
How many OSHA inspections has POLYFLEX DIVISION OF FLEX TECHNOLOGIES had? ▼
POLYFLEX DIVISION OF FLEX TECHNOLOGIES has had 2 OSHA inspections, with the first recorded on 2015-01-21 and the most recent on 2020-02-25. This averages 1.0 violations per inspection.
What is the total penalty amount for POLYFLEX DIVISION OF FLEX TECHNOLOGIES? ▼
POLYFLEX DIVISION OF FLEX TECHNOLOGIES has been assessed $800 in current OSHA penalties, reduced from an initial assessment of $11,200 (a 92.9% reduction).
Does POLYFLEX DIVISION OF FLEX TECHNOLOGIES have any serious or willful violations? ▼
Yes. POLYFLEX DIVISION OF FLEX TECHNOLOGIES has 1 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does POLYFLEX DIVISION OF FLEX TECHNOLOGIES operate in? ▼
POLYFLEX DIVISION OF FLEX TECHNOLOGIES operates in the Manufacturing sector (NAICS code 325211). This industry has 14,000 employers tracked by PlainWorker, with 35,397 total OSHA inspections and $228.20M in cumulative penalties.
What are my rights if I work at POLYFLEX DIVISION OF FLEX TECHNOLOGIES? ▼
Under the Occupational Safety and Health Act, employees at POLYFLEX DIVISION OF FLEX TECHNOLOGIES have the right to a safe workplace, the right to report hazards without retaliation, the right to request an OSHA inspection, and the right to access their own exposure and medical records. Workers can also refuse dangerous work if they believe they face imminent danger and their employer has failed to address the hazard.
How do I file an OSHA complaint against POLYFLEX DIVISION OF FLEX TECHNOLOGIES? ▼
You can file a complaint with OSHA online at osha.gov/workers/file-complaint, by calling 1-800-321-OSHA (6742), or by visiting your local OSHA area office. Complaints can be filed confidentially. OSHA is required to respond to all complaints and will prioritize those alleging imminent danger. You are protected from employer retaliation under Section 11(c) of the OSH Act.
How does POLYFLEX DIVISION OF FLEX TECHNOLOGIES's safety record compare to industry average? ▼
POLYFLEX DIVISION OF FLEX TECHNOLOGIES's total OSHA penalty of $800 is below the Manufacturing industry average of $16,300 per employer. The employer has 2 inspections compared to the industry average of 2.5 per employer.

Explore PlainWorker

Manufacturing Industry

All 14,000 employers in this sector
Employers in OH

All inspected employers in this state
Safety Rankings

Most penalized, repeat violators & more

Related Data Sources

Safety Grade on PlainSafetyScore → Salary Data on WageDex → Labor Market on PlainLabor → Workforce Data on PlainEmploy →

Data Sources & Methodology

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Read our methodology — how this data is sourced, computed, and verified.

Verify with OSHA establishment search →