Manufacturing · Brownsville, TX

Polibrid Coatings, INC.

According to OSHA enforcement records (2010–2026), Polibrid Coatings, INC. ranks #70,095 of 99,447 penalized U.S. employers by total current penalty, with a average safety record: 3 violations across 2 inspections.

Lower half by penalty67% serious
$2,800
OSHA penalties
3
Violations cited
2
OSHA inspections
#70,095
of 99,447 penalized employers

Polibrid Coatings, INC. in Brownsville, TX has been the subject of 2 OSHA workplace inspections and 3 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $2,800. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Polibrid Coatings, INC. 2 times over 3 years, roughly once every couple of years. These inspections resulted in 3 violations, averaging 1.5 per inspection. According to OSHA enforcement records, its total current penalty ranks #70,095 of 99,447 penalized U.S. employers (the lower half of penalized employers nationally). Of these, 2 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs moderately below peers (0.8x the sector average) on inspection frequency. For comparison, Element Architectural Metals, LLC in Phoenix, AZ is another manufacturing employer with 3 OSHA inspections on record and $2,800 in current penalties.

1.5
violations per inspection
66.7%
of violations were serious
#70,095
of 99,447 penalized employers

Compliance score

C 68/100
  • C OSHA safety compliance: 3 violations across 2 OSHA inspections (1.5 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How Polibrid Coatings, INC. compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Polibrid Coatings, INC. runs well below peers (0.18x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$2,800 Top 30% most affordable more affordable than 70% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). This entry sits in this band. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Above this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Above this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Polibrid Coatings, INC..

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both1.92.022.02.00.414.528.542.556.5OSHA inspectionsViolations citedNELCON, INC., OSHA inspections: 2 · Violations cited: 32COLUMBIA CEDAR INC, OSHA inspections: 2 · Violations cited: 44AMERICAN FELT & FILT…, OSHA inspections: 2 · Violations cited: 54PARKER TRUTEC, INC., OSHA inspections: 2 · Violations cited: 12RBC-WEST TRENTON A D…, OSHA inspections: 2 · Violations cited: 25DFA DAIRY BRANDS FLU…, OSHA inspections: 2 · Violations cited: 17QUALITY CULVERT INC, OSHA inspections: 2 · Violations cited: 16FLANDERS PROVISION C…, OSHA inspections: 2 · Violations cited: 7BLACK BAY VENTURES V…, OSHA inspections: 2 · Violations cited: 16STEWARD PLASTICS, INC., OSHA inspections: 2 · Violations cited: 7MANNING'S BEEF, LLC, OSHA inspections: 2 · Violations cited: 9MOUNTAIN WEST PRODUC…, OSHA inspections: 2 · Violations cited: 4SOS PRESCOTT, INC., OSHA inspections: 2 · Violations cited: 15POLYCHEM CORPORATION, OSHA inspections: 2 · Violations cited: 10AQUAMAR, INC., OSHA inspections: 2 · Violations cited: 8DAL-TILE TENNESSEE, …, OSHA inspections: 2 · Violations cited: 23SEPTEMBER ENDS CO., OSHA inspections: 2 · Violations cited: 6EZZO SAUSAGE COMPANY, OSHA inspections: 2 · Violations cited: 7CASCADES HOLDING US …, OSHA inspections: 2 · Violations cited: 29MILLER'S BAKERY, LLC, OSHA inspections: 2 · Violations cited: 6Polibrid Coatings, I…, OSHA inspections: 2 · Violations cited: 3
Polibrid Coatings, INC. has 2 OSHA inspections on record and 3 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Polibrid Coatings, INC. in the Manufacturing enforcement ledger

Manufacturing sector: Polibrid Coatings, INC. is the #27,745 heaviest OSHA penalty carrier of 35,243 employers with nonzero fines ($2,800).

How Polibrid Coatings, INC. Compares

Polibrid Coatings, INC.'s 1.50 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs well below peers (0.18x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

2

First Inspection

2016-06-01

Last Inspection

2019-11-14

Inspection Span

3 yrs

Violations / Inspection

1.5

Avg Penalty / Inspection

$1,400

Industry Avg / Inspection

$6,093

What this shows 2 inspections over 3 years, averaging 1.5 violations per visit. That's $1,400 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

2

Serious

66.7% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

1

Other-Than-Serious

33.3% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$2,800

Current Penalty Amount

$2,800

Penalty Reduction

None

What this shows No reduction on record. The current penalty matches the original OSHA assessment.

Industry Safety Context: Manufacturing

How Polibrid Coatings, INC. compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Polibrid Coatings, INC. Industry Avg
Inspections 2 2.6
Violations 3 8.0
Total Penalty $2,800 $15,763
Avg Penalty per Inspection $1,400 $6,093

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Polibrid Coatings, INC., both outside TX so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($2,800 here).

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (2 inspections here).

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Compare Polibrid Coatings, INC. vs Element Architectural Metals, LLC side-by-side →

What to do with this record

Use Polibrid Coatings, INC.'s enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Polibrid Coatings, INC. against Element Architectural Metals, LLC, a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Polibrid Coatings, INC.'s inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Polibrid Coatings, INC. safe to work at?
Based on OSHA records, Polibrid Coatings, INC.'s workplace safety record is average, with typical for this industry. The employer has 3 violations across 2 inspections, including 2 serious violations. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does Polibrid Coatings, INC. have?
Polibrid Coatings, INC. has 3 OSHA violations on record, including 2 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $2,800.
How many OSHA inspections has Polibrid Coatings, INC. had?
Polibrid Coatings, INC. has had 2 OSHA inspections, with the first recorded on 2016-06-01 and the most recent on 2019-11-14. This averages 1.5 violations per inspection.
What is the total penalty amount for Polibrid Coatings, INC.?
Polibrid Coatings, INC. has been assessed $2,800 in current OSHA penalties.
Does Polibrid Coatings, INC. have any serious or willful violations?
Yes. Polibrid Coatings, INC. has 2 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Polibrid Coatings, INC. operate in?
Polibrid Coatings, INC. operates in the Manufacturing sector (NAICS code 325991). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Polibrid Coatings, INC. rank nationally on OSHA penalties?
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Polibrid Coatings, INC. ranks #70,095 (the lower half of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Polibrid Coatings, INC.'s safety record compare to industry average?
Polibrid Coatings, INC.'s total OSHA penalty of $2,800 is below the Manufacturing industry average of $15,763 per employer. The employer has 2 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Element Architectural Metals, LLC in Phoenix, AZ is a similar manufacturing employer with $2,800 in current penalties.
Data Sources & Methodology

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 2 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.