Manufacturing · Irvington, NJ

Plastico Products LLC

According to OSHA enforcement records (2010–2026), Plastico Products LLC ranks #1,507 of 99,447 penalized U.S. employers by total current penalty, with a concerning safety record: 43 violations across 6 inspections.

Top 5% by penalty81% serious

Compiled by Plainworker · September 6, 2026

$108,176
OSHA penalties: 43
Violations cited: 6
OSHA inspections: #1,507
of 99,447 penalized employers

Plastico Products LLC in Irvington, NJ has been the subject of 6 OSHA workplace inspections and 43 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $108,176. Federal wage-and-hour enforcement records also show 3 WHD violations against this employer under the Fair Labor Standards Act. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has kept close, sustained watch on Plastico Products LLC: 6 inspections in 1 year, several times a year. These inspections resulted in 43 violations, averaging 7.2 per inspection - a notably high rate. According to OSHA enforcement records, its total current penalty ranks #1,507 of 99,447 penalized U.S. employers (the top 5% of penalized employers nationally). Of these, 35 were classified as serious and 3 as willful - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs well above peers (2.3x the sector average) on inspection frequency. The Department of Labor also found wage violations, with $3,499 in back wages owed to 2 affected workers. For comparison, Grenada Stamping & Assembly, INC. in Grenada, MS is another manufacturing employer with 4 OSHA inspections on record and $111,500 in current penalties.

7.2
violations per inspection: 81.4%
of violations were serious: #1,507
of 99,447 penalized employers: $3,499
in back wages recovered

Compliance score

F 44/100

F OSHA safety compliance: 43 violations across 6 OSHA inspections (7.2 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.
B Wage & hour compliance: $3K in back wages owed across 1 WHD case ($3K per case), vs. national p10 $2K (best) / p90 $58K (worst) among 91,622 employers with a WHD case on file.

Open my watchlist

Plastico Products LLC

$108,176
Manufacturing avg

$15,763

What this shows Plastico Products LLC runs far above peers (6.9x the sector average) in total OSHA penalties.

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$108,176 Bottom 2% least affordable more affordable than 2% of 99,447 U.S. employers with a penalty

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Plastico Products LLC.

Plastico Products LLC has 6 OSHA inspections on record and 43 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Plastico Products LLC in the Manufacturing enforcement ledger

Manufacturing sector: Plastico Products LLC is the #817 heaviest OSHA penalty carrier of 35,243 employers with nonzero fines ($108,176). On wage-and-hour enforcement alone, Plastico Products LLC ranks #3,430 among 4,429 Manufacturing employers with WHD recoveries ($3,499).

Combined federal exposure here: $108,176 OSHA penalties plus $3,499 WHD back wages (3.1% of the combined total is wage recovery).

How Plastico Products LLC Compares

Plastico Products LLC's 7.17 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs far above peers (6.9x the sector average).

Total Inspections

First Inspection

2011-11-15

Last Inspection

2012-10-25

Inspection Span

1 yr

Violations / Inspection

7.2

Avg Penalty / Inspection

$18,029

Industry Avg / Inspection

$6,093

What this shows 6 inspections over 1 year, averaging 7.2 violations per visit. That's $18,029 per inspection vs. the Manufacturing average of $6,093.

Serious

81.4% of total

Willful

7.0% of total

Repeat

4.7% of total

Other-Than-Serious

7.0% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Initial Penalty Assessed

$165,680

Current Penalty Amount

$108,176

Penalty Reduction

34.7%

Combined Impact (OSHA + WHD)

$111,675

What this shows Penalties were reduced by $57,504 from the initial assessment of $165,680. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Wage & Hour Findings

WHD Cases

Back Wages Owed

$3,499

Employees Affected

WHD Violations

Avg Back Wages per Employee

$1,750

Avg Back Wages per CaseBelow average

$3,499

The Department of Labor's Wage and Hour Division found that Plastico Products LLC owed $3,499 in back wages to 2 employees across 1 case and 3 violations. WHD enforces federal labor laws including the Fair Labor Standards Act (FLSA), covering minimum wage, overtime pay, and child labor standards.

Industry Safety Context: Manufacturing

How Plastico Products LLC compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric	Plastico Products LLC	Industry Avg
Inspections	6	2.6
Violations	43	8.0
Total Penalty	$108,176	$15,763
Avg Penalty per Inspection	$18,029	$6,093

View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Plastico Products LLC, both outside NJ so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($108,176 here).

Tpi Composites Iowa LLC $108,063 IA Newman Technology of Alabama, INC. $108,011 AL Appian Manufacturing Corporation $107,953 OH Ferrara Candy Company $107,900 IL

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (6 inspections here).

Airmaster Fan Company 6 insp. Clarklake, MI Schneider Electric USA, INC. 6 insp. Oxford, OH Ace Equipment Company 6 insp. Antigo, WI Thames Shipyard & Repair CO., INC. 6 insp. New London, CT

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

PCC Rollmet, INC.

Irvine, CA

5 inspections $111,675

Crystal Finishing Systems, INC.

Mosinee, WI

8 inspections $111,732

Whittier Seafood LLC

Whittier, AK

9 inspections $111,593

Summit Steel Fabricators, INC.

Houston, TX

5 inspections $111,774

Grenada Stamping & Assembly, INC.

Grenada, MS

4 inspections $111,500

Compare Plastico Products LLC vs PCC Rollmet, INC. side-by-side →

What to do with this record

Use Plastico Products LLC's enforcement history as one data point, not the whole picture.

A single employer's record can look unusual in isolation. Compare Plastico Products LLC against PCC Rollmet, INC., a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
See whether Plastico Products LLC's inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
Plastico Products LLC also carries $3,499 in Wage and Hour Division back-wages, a separate enforcement track from OSHA safety violations. How wage-theft enforcement works

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Plastico Products LLC safe to work at? ▼

Based on OSHA records, Plastico Products LLC's workplace safety record is concerning, with multiple serious compliance issues. The employer has 43 violations across 6 inspections, including 35 serious violations. Compared to Manufacturing industry peers, this is above average for penalties. Review the full inspection history below for details.

How many OSHA violations does Plastico Products LLC have? ▼

Plastico Products LLC has 43 OSHA violations on record, including 35 serious, 3 willful, and 2 repeat violations. The total current penalty amount is $108,176.

How many OSHA inspections has Plastico Products LLC had? ▼

Plastico Products LLC has had 6 OSHA inspections, with the first recorded on 2011-11-15 and the most recent on 2012-10-25. This averages 7.2 violations per inspection.

What is the total penalty amount for Plastico Products LLC? ▼

Plastico Products LLC has been assessed $108,176 in current OSHA penalties, reduced from an initial assessment of $165,680 (a 34.7% reduction). Additionally, $3,499 in back wages were owed through WHD enforcement.

Does Plastico Products LLC have any serious or willful violations? ▼

Yes. Plastico Products LLC has 35 serious violations, 3 willful violations, and 2 repeat violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.

Has Plastico Products LLC been cited for wage theft? ▼

Yes. The Department of Labor's Wage and Hour Division has recorded 1 enforcement case against Plastico Products LLC, resulting in $3,499 in back wages owed to 2 affected workers. These cases involve violations of federal labor laws including minimum wage, overtime, and other worker protections.

What industry does Plastico Products LLC operate in? ▼

Plastico Products LLC operates in the Manufacturing sector (NAICS code 326150). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.

What should I do if Plastico Products LLC owes me wages? ▼

If you believe Plastico Products LLC owes you wages, you can file a complaint with the Department of Labor's Wage and Hour Division at dol.gov/agencies/whd/contact/complaints or by calling 1-866-487-9243. WHD investigates violations of the Fair Labor Standards Act including unpaid minimum wage, overtime, and unauthorized deductions. The DOL has previously found $3,499 in back wages owed by this employer across 1 case.

Where does Plastico Products LLC rank nationally on OSHA penalties? ▼

Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Plastico Products LLC ranks #1,507 (the top 5% of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.

How does Plastico Products LLC's safety record compare to industry average? ▼

Plastico Products LLC's total OSHA penalty of $108,176 is above the Manufacturing industry average of $15,763 per employer (6.9x the average). The employer has 6 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Grenada Stamping & Assembly, INC. in Grenada, MS is a similar manufacturing employer with $111,500 in current penalties.

Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.