PlainWorker
Employers › MI

Manufacturing · East Tawas, MI

Plastic Trim INTL INC

According to OSHA enforcement records (2010–2026), Plastic Trim INTL INC ranks #14,050 of 99,447 penalized U.S. employers by total current penalty, with a concerning safety record: 30 violations across 3 inspections.

Top 25% by penalty43% serious
$24,100
OSHA penalties
30
Violations cited
3
OSHA inspections
#14,050
of 99,447 penalized employers

Plastic Trim INTL INC in East Tawas, MI has been the subject of 3 OSHA workplace inspections and 30 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $24,100. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Plastic Trim INTL INC 3 times over 3 years, roughly annually. These inspections turned up 30 violations, averaging 10.0 per inspection - an extremely dense concentration of citations. According to OSHA enforcement records, its total current penalty ranks #14,050 of 99,447 penalized U.S. employers (the top quarter of penalized employers nationally). Of these, 13 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this sits roughly in line with peers (1.2x the sector average) on inspection frequency. For comparison, Centre Concrete Company in State College, PA is another manufacturing employer with 2 OSHA inspections on record and $24,105 in current penalties.

10.0
violations per inspection
43.3%
of violations were serious
#14,050
of 99,447 penalized employers

Compliance score

F 0/100
  • F OSHA safety compliance: 30 violations across 3 OSHA inspections (10.0 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How Plastic Trim INTL INC compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Plastic Trim INTL INC runs moderately above peers (1.5x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$24,100 Bottom 14% least affordable more affordable than 14% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Below this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Below this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Below this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). This entry sits in this band. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Plastic Trim INTL INC.

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both3.03.033.03.01.310.720.029.438.7OSHA inspectionsViolations citedBIGTEX TRAILERS, OSHA inspections: 3 · Violations cited: 37DARLING INGREDIENTS …, OSHA inspections: 3 · Violations cited: 13C. E. SHEPHERD COMPA…, OSHA inspections: 3 · Violations cited: 16ALBAUGH LLC, OSHA inspections: 3 · Violations cited: 8EFFECTIVE PLAN, INC., OSHA inspections: 3 · Violations cited: 14GEIB REFINING CORPOR…, OSHA inspections: 3 · Violations cited: 37KELLY RYAN EQUIPMENT…, OSHA inspections: 3 · Violations cited: 21DOUGLAS DYNAMICS, INC., OSHA inspections: 3 · Violations cited: 14STAMPED FITTINGS, INC., OSHA inspections: 3 · Violations cited: 13STEVES AND SONS, INC., OSHA inspections: 3 · Violations cited: 6FOLIUM BIOSCIENCES, …, OSHA inspections: 3 · Violations cited: 12MOMENTUM MANUFACTURI…, OSHA inspections: 3 · Violations cited: 4AMEREQUIP CORPORATIO…, OSHA inspections: 3 · Violations cited: 8WOODLINE WORKS CORPO…, OSHA inspections: 3 · Violations cited: 17PACIFIC STATES INDUS…, OSHA inspections: 3 · Violations cited: 10INNER-TITE CORP., OSHA inspections: 3 · Violations cited: 6FABCO STEEL FABRICAT…, OSHA inspections: 3 · Violations cited: 9UNIVERSAL TEXTILE TE…, OSHA inspections: 3 · Violations cited: 5MEZA PALLETS INC, OSHA inspections: 3 · Violations cited: 26ROYAL CUP, INC., OSHA inspections: 3 · Violations cited: 3Plastic Trim INTL INC, OSHA inspections: 3 · Violations cited: 30
Plastic Trim INTL INC has 3 OSHA inspections on record and 30 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Plastic Trim INTL INC in the Manufacturing enforcement ledger

Among 35,243 Manufacturing employers with OSHA penalties on file, Plastic Trim INTL INC ranks #6,862 at $24,100 current penalty.

How Plastic Trim INTL INC Compares

Plastic Trim INTL INC's 10.00 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs moderately above peers (1.5x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

3

First Inspection

2010-05-21

Last Inspection

2013-02-21

Inspection Span

3 yrs

Violations / Inspection

10.0

Avg Penalty / Inspection

$8,033

Industry Avg / Inspection

$6,093

What this shows 3 inspections over 3 years, averaging 10.0 violations per visit. That's $8,033 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

13

Serious

43.3% of total

0

Willful

0.0% of total

1

Repeat

3.3% of total

16

Other-Than-Serious

53.3% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$30,700

Current Penalty Amount

$24,100

Penalty Reduction

21.5%

What this shows Penalties were reduced by $6,600 from the initial assessment of $30,700. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Plastic Trim INTL INC compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Plastic Trim INTL INC Industry Avg
Inspections 3 2.6
Violations 30 8.0
Total Penalty $24,100 $15,763
Avg Penalty per Inspection $8,033 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Plastic Trim INTL INC, both outside MI so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($24,100 here).

Turano Knead Dough Baking Company $24,100 IL K & S Pallets, INC. $24,100 IN Centre Concrete Company $24,105 PA Ingredion $24,108 MO

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (3 inspections here).

Bigtex Trailers 3 insp. Kingston, OK Darling Ingredients INC. 3 insp. Grapeland, TX C. E. Shepherd Company, L.P. 3 insp. Houston, TX Albaugh LLC 3 insp. Saint Joseph, MO

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Turano Knead Dough Baking Company
Bolingbrook, IL
5 inspections $24,100
The SHYFT Group INC
Charlotte, MI
7 inspections $24,100
K & S Pallets, INC.
Fort Wayne, IN
2 inspections $24,100
Centre Concrete Company
State College, PA
2 inspections $24,105
Ingredion
North Kansas City, MO
4 inspections $24,108

Compare Plastic Trim INTL INC vs Turano Knead Dough Baking Company side-by-side →

What to do with this record

Use Plastic Trim INTL INC's enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Plastic Trim INTL INC against Turano Knead Dough Baking Company, a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Plastic Trim INTL INC's inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Plastic Trim INTL INC safe to work at? ▼
Based on OSHA records, Plastic Trim INTL INC's workplace safety record is concerning, with multiple serious compliance issues. The employer has 30 violations across 3 inspections, including 13 serious violations. Compared to Manufacturing industry peers, this is above average for penalties. Review the full inspection history below for details.
How many OSHA violations does Plastic Trim INTL INC have? ▼
Plastic Trim INTL INC has 30 OSHA violations on record, including 13 serious, 0 willful, and 1 repeat violations. The total current penalty amount is $24,100.
How many OSHA inspections has Plastic Trim INTL INC had? ▼
Plastic Trim INTL INC has had 3 OSHA inspections, with the first recorded on 2010-05-21 and the most recent on 2013-02-21. This averages 10.0 violations per inspection.
What is the total penalty amount for Plastic Trim INTL INC? ▼
Plastic Trim INTL INC has been assessed $24,100 in current OSHA penalties, reduced from an initial assessment of $30,700 (a 21.5% reduction).
Does Plastic Trim INTL INC have any serious or willful violations? ▼
Yes. Plastic Trim INTL INC has 13 serious violations, and 1 repeat violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Plastic Trim INTL INC operate in? ▼
Plastic Trim INTL INC operates in the Manufacturing sector (NAICS code 336399). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Plastic Trim INTL INC rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Plastic Trim INTL INC ranks #14,050 (the top quarter of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Plastic Trim INTL INC's safety record compare to industry average? ▼
Plastic Trim INTL INC's total OSHA penalty of $24,100 is above the Manufacturing industry average of $15,763 per employer (1.5x the average). The employer has 3 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Centre Concrete Company in State College, PA is a similar manufacturing employer with $24,105 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 3 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.