PlainWorker
Employers › PA

Manufacturing · Pittsburgh, PA

Pittsburgh Precision Turned Products, LLC

According to OSHA enforcement records (2010–2026), Pittsburgh Precision Turned Products, LLC ranks #25,972 of 99,447 penalized U.S. employers by total current penalty, with a concerning safety record: 13 violations across 3 inspections.

Upper half by penalty62% serious
$14,000
OSHA penalties
13
Violations cited
3
OSHA inspections
#25,972
of 99,447 penalized employers

Pittsburgh Precision Turned Products, LLC in Pittsburgh, PA has been the subject of 3 OSHA workplace inspections and 13 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $14,000. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Pittsburgh Precision Turned Products, LLC 3 times across a longer 7-year span, an infrequent cadence. These inspections resulted in 13 violations, averaging 4.3 per inspection, above what's typical for a single visit. According to OSHA enforcement records, its total current penalty ranks #25,972 of 99,447 penalized U.S. employers (the upper half of penalized employers nationally). Of these, 8 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this sits roughly in line with peers (1.2x the sector average) on inspection frequency. For comparison, Fieldale Farms Corporation in Cornelia, GA is another manufacturing employer with 3 OSHA inspections on record and $14,000 in current penalties.

4.3
violations per inspection
61.5%
of violations were serious
#25,972
of 99,447 penalized employers

Compliance score

F 27/100
  • F OSHA safety compliance: 13 violations across 3 OSHA inspections (4.3 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How this employer compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Pittsburgh Precision Turned Products, LLC sits roughly in line with peers (0.9x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$14,000 Bottom 26% least affordable more affordable than 26% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Below this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). This entry sits in this band. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Pittsburgh Precision Turned Products, LLC.

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both3.03.033.03.02.311.420.529.638.6OSHA inspectionsViolations citedSAF-HOLLAND, INC., OSHA inspections: 3 · Violations cited: 30ELKHART PRODUCTS COR…, OSHA inspections: 3 · Violations cited: 10GENERAL EXTRUSIONS, …, OSHA inspections: 3 · Violations cited: 4BAY CITIES TIN SHOP,…, OSHA inspections: 3 · Violations cited: 19WESTLAKE VINYLS COMP…, OSHA inspections: 3 · Violations cited: 16TUSK HARDWOOD, LLC, OSHA inspections: 3 · Violations cited: 14JSW STEEL USA, INC., OSHA inspections: 3 · Violations cited: 4BEE LINE COMPANY, OSHA inspections: 3 · Violations cited: 14METAL MANUFACTURING …, OSHA inspections: 3 · Violations cited: 11YELLOW CREEK CASTING…, OSHA inspections: 3 · Violations cited: 19SOLESBEE'S EQUIPMENT…, OSHA inspections: 3 · Violations cited: 14ZENAR CORPORATION, OSHA inspections: 3 · Violations cited: 5COSMOS MANUFACTURING…, OSHA inspections: 3 · Violations cited: 13EAGLE MANUFACTURING …, OSHA inspections: 3 · Violations cited: 18NORSTAN, INC., OSHA inspections: 3 · Violations cited: 9MGM INDUSTRIES INCOR…, OSHA inspections: 3 · Violations cited: 37WOOTEN MACHINE COMPA…, OSHA inspections: 3 · Violations cited: 4VOSS MANUFACTURING, …, OSHA inspections: 3 · Violations cited: 9CHESAPEAKE SHIPBUILD…, OSHA inspections: 3 · Violations cited: 5THE MANISCHEWITZ COM…, OSHA inspections: 3 · Violations cited: 4Pittsburgh Precision…, OSHA inspections: 3 · Violations cited: 13
Pittsburgh Precision Turned Products, LLC has 3 OSHA inspections on record and 13 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Pittsburgh Precision Turned Products, LLC in the Manufacturing enforcement ledger

Among 35,243 Manufacturing employers with OSHA penalties on file, Pittsburgh Precision Turned Products, LLC ranks #12,096 at $14,000 current penalty.

How Pittsburgh Precision Turned Products, LLC Compares

Pittsburgh Precision Turned Products, LLC's 4.33 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty sits roughly in line with peers (0.9x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

3

First Inspection

2018-11-01

Last Inspection

2026-04-14

Inspection Span

7 yrs

Violations / Inspection

4.3

Avg Penalty / Inspection

$4,667

Industry Avg / Inspection

$6,093

What this shows 3 inspections over 7 years, averaging 4.3 violations per visit. That's $4,667 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

8

Serious

61.5% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

5

Other-Than-Serious

38.5% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$27,606

Current Penalty Amount

$14,000

Penalty Reduction

49.3%

What this shows Penalties were reduced by $13,606 from the initial assessment of $27,606. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Pittsburgh Precision Turned Products, LLC compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Pittsburgh Precision Turned Products, LLC Industry Avg
Inspections 3 2.6
Violations 13 8.0
Total Penalty $14,000 $15,763
Avg Penalty per Inspection $4,667 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Pittsburgh Precision Turned Products, LLC, both outside PA so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($14,000 here).

Guardian Industries $14,000 MI Fieldale Farms Corporation $14,000 GA Ascend Performance Materials LLC $14,000 TX Wieser Concrete Products, INC. $14,000 WI

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (3 inspections here).

Saf-Holland, INC. 3 insp. Dumas, AR Elkhart Products Corporation 3 insp. Fayetteville, AR General Extrusions, INC. 3 insp. Youngstown, OH Bay Cities Tin Shop, INC. 3 insp. Gardena, CA

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

KB Crash Creations, LLC
West Wyoming, PA
2 inspections $14,000
Guardian Industries
Carleton, MI
6 inspections $14,000
Fieldale Farms Corporation
Cornelia, GA
3 inspections $14,000
Metal-Fab INC.
Wichita, KS
4 inspections $14,000
Af Global Corporation
Woodville, TX
2 inspections $14,000

Compare Pittsburgh Precision Turned Products, LLC vs KB Crash Creations, LLC side-by-side →

What to do with this record

Use Pittsburgh Precision Turned Products, LLC's enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Pittsburgh Precision Turned Products, LLC against KB Crash Creations, LLC, a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Pittsburgh Precision Turned Products, LLC's inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Pittsburgh Precision Turned Products, LLC safe to work at? ▼
Based on OSHA records, Pittsburgh Precision Turned Products, LLC's workplace safety record is concerning, with multiple serious compliance issues. The employer has 13 violations across 3 inspections, including 8 serious violations. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does Pittsburgh Precision Turned Products, LLC have? ▼
Pittsburgh Precision Turned Products, LLC has 13 OSHA violations on record, including 8 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $14,000.
How many OSHA inspections has Pittsburgh Precision Turned Products, LLC had? ▼
Pittsburgh Precision Turned Products, LLC has had 3 OSHA inspections, with the first recorded on 2018-11-01 and the most recent on 2026-04-14. This averages 4.3 violations per inspection.
What is the total penalty amount for Pittsburgh Precision Turned Products, LLC? ▼
Pittsburgh Precision Turned Products, LLC has been assessed $14,000 in current OSHA penalties, reduced from an initial assessment of $27,606 (a 49.3% reduction).
Does Pittsburgh Precision Turned Products, LLC have any serious or willful violations? ▼
Yes. Pittsburgh Precision Turned Products, LLC has 8 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Pittsburgh Precision Turned Products, LLC operate in? ▼
Pittsburgh Precision Turned Products, LLC operates in the Manufacturing sector (NAICS code 332721). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Pittsburgh Precision Turned Products, LLC rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Pittsburgh Precision Turned Products, LLC ranks #25,972 (the upper half of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Pittsburgh Precision Turned Products, LLC's safety record compare to industry average? ▼
Pittsburgh Precision Turned Products, LLC's total OSHA penalty of $14,000 is below the Manufacturing industry average of $15,763 per employer. The employer has 3 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Fieldale Farms Corporation in Cornelia, GA is a similar manufacturing employer with $14,000 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 3 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.