PlainWorker
Employers › WI

Manufacturing · Racine, WI

Pinnacle Precision Technologies, LLC

According to OSHA enforcement records (2010–2026), Pinnacle Precision Technologies, LLC ranks #34,363 of 99,447 penalized U.S. employers by total current penalty, with a concerning safety record: 13 violations across 3 inspections.

Upper half by penalty77% serious
$10,200
OSHA penalties
13
Violations cited
3
OSHA inspections
#34,363
of 99,447 penalized employers

Pinnacle Precision Technologies, LLC in Racine, WI has been the subject of 3 OSHA workplace inspections and 13 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $10,200. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Pinnacle Precision Technologies, LLC 3 times over 1 year - more than twice a year on average. These inspections resulted in 13 violations, averaging 4.3 per inspection, above what's typical for a single visit. According to OSHA enforcement records, its total current penalty ranks #34,363 of 99,447 penalized U.S. employers (the upper half of penalized employers nationally). Of these, 10 were classified as serious and 1 as willful - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this sits roughly in line with peers (1.2x the sector average) on inspection frequency. For comparison, Tienergy, LLC in Superior, WI is another manufacturing employer with 4 OSHA inspections on record and $10,200 in current penalties.

4.3
violations per inspection
76.9%
of violations were serious
#34,363
of 99,447 penalized employers

Compliance score

F 27/100
  • F OSHA safety compliance: 13 violations across 3 OSHA inspections (4.3 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How this employer compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Pinnacle Precision Technologies, LLC runs moderately below peers (0.6x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$10,200 Bottom 35% least affordable more affordable than 35% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Below this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). This entry sits in this band. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Pinnacle Precision Technologies, LLC.

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both3.03.033.03.0013.426.740.153.5OSHA inspectionsViolations citedGT STONE GRANITE LLC, OSHA inspections: 3 · Violations cited: 27PORCELEN LIMITED CON…, OSHA inspections: 3 · Violations cited: 14BRENTWOOD ORIGINALS,…, OSHA inspections: 3 · Violations cited: 11SPARTECH PLASTICS, LLC, OSHA inspections: 3 · Violations cited: 23BLUE BELL MATTRESS C…, OSHA inspections: 3 · Violations cited: 24SPECIFIED PLATING CO., OSHA inspections: 3 · Violations cited: 21CLEVELAND DIE & MANU…, OSHA inspections: 3 · Violations cited: 6HAYASHI TELEMPU NORT…, OSHA inspections: 3 · Violations cited: 6HINKLE CHAIR COMPANY…, OSHA inspections: 3 · Violations cited: 51ARROWHEAD PRODUCTS C…, OSHA inspections: 3 · Violations cited: 7OSMUNDSON MANUFACTUR…, OSHA inspections: 3 · Violations cited: 26MILLER MANUFACTURING, OSHA inspections: 3 · Violations cited: 9PETERSON AMERICAN CO…, OSHA inspections: 3 · Violations cited: 7LIBERTY DUCT, LLC, OSHA inspections: 3 · Violations cited: 17WINSTON PLYWOOD & VE…, OSHA inspections: 3 · Violations cited: 4DUDEK & BOCK SPRING …, OSHA inspections: 3 · Violations cited: 2UNITED LENS COMPANY,…, OSHA inspections: 3 · Violations cited: 13SUNRISE LUMBER COMPANY, OSHA inspections: 3 · Violations cited: 19MIDWEST SIGN COMPANY, OSHA inspections: 3 · Violations cited: 7FXI, OSHA inspections: 3 · Violations cited: 2Pinnacle Precision T…, OSHA inspections: 3 · Violations cited: 13
Pinnacle Precision Technologies, LLC has 3 OSHA inspections on record and 13 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Pinnacle Precision Technologies, LLC in the Manufacturing enforcement ledger

Manufacturing sector: Pinnacle Precision Technologies, LLC is the #15,528 heaviest OSHA penalty carrier of 35,243 employers with nonzero fines ($10,200).

How Pinnacle Precision Technologies, LLC Compares

Pinnacle Precision Technologies, LLC's 4.33 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs moderately below peers (0.6x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

3

First Inspection

2011-11-15

Last Inspection

2012-03-29

Inspection Span

1 yr

Violations / Inspection

4.3

Avg Penalty / Inspection

$3,400

Industry Avg / Inspection

$6,093

What this shows 3 inspections over 1 year, averaging 4.3 violations per visit. That's $3,400 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

10

Serious

76.9% of total

1

Willful

7.7% of total

0

Repeat

0.0% of total

2

Other-Than-Serious

15.4% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$27,000

Current Penalty Amount

$10,200

Penalty Reduction

62.2%

What this shows Penalties were reduced by $16,800 from the initial assessment of $27,000. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Pinnacle Precision Technologies, LLC compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Pinnacle Precision Technologies, LLC Industry Avg
Inspections 3 2.6
Violations 13 8.0
Total Penalty $10,200 $15,763
Avg Penalty per Inspection $3,400 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Pinnacle Precision Technologies, LLC, both outside WI so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($10,200 here).

Gielow Pickles INC $10,200 MI Humatech INC $10,200 NM United Furniture Industries INC. $10,200 MS Steel Tek, INC. $10,200 OK

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (3 inspections here).

GT Stone Granite LLC 3 insp. Cartersville, GA Porcelen Limited Connecticut, LLC 3 insp. Hamden, CT Brentwood Originals, INC. 3 insp. Walls, MS Spartech Plastics, LLC 3 insp. Evanston, IL

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Gielow Pickles INC
Croswell, MI
2 inspections $10,200
Humatech INC
Albuquerque, NM
2 inspections $10,200
United Furniture Industries INC.
Amory, MS
3 inspections $10,200
Steel Tek, INC.
Tulsa, OK
2 inspections $10,200
Tienergy, LLC
Superior, WI
4 inspections $10,200

Compare Pinnacle Precision Technologies, LLC vs Gielow Pickles INC side-by-side →

What to do with this record

Use Pinnacle Precision Technologies, LLC's enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Pinnacle Precision Technologies, LLC against Gielow Pickles INC, a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Pinnacle Precision Technologies, LLC's inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Pinnacle Precision Technologies, LLC safe to work at? ▼
Based on OSHA records, Pinnacle Precision Technologies, LLC's workplace safety record is concerning, with multiple serious compliance issues. The employer has 13 violations across 3 inspections, including 10 serious violations. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does Pinnacle Precision Technologies, LLC have? ▼
Pinnacle Precision Technologies, LLC has 13 OSHA violations on record, including 10 serious, 1 willful, and 0 repeat violations. The total current penalty amount is $10,200.
How many OSHA inspections has Pinnacle Precision Technologies, LLC had? ▼
Pinnacle Precision Technologies, LLC has had 3 OSHA inspections, with the first recorded on 2011-11-15 and the most recent on 2012-03-29. This averages 4.3 violations per inspection.
What is the total penalty amount for Pinnacle Precision Technologies, LLC? ▼
Pinnacle Precision Technologies, LLC has been assessed $10,200 in current OSHA penalties, reduced from an initial assessment of $27,000 (a 62.2% reduction).
Does Pinnacle Precision Technologies, LLC have any serious or willful violations? ▼
Yes. Pinnacle Precision Technologies, LLC has 10 serious violations, 1 willful violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Pinnacle Precision Technologies, LLC operate in? ▼
Pinnacle Precision Technologies, LLC operates in the Manufacturing sector (NAICS code 332116). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Pinnacle Precision Technologies, LLC rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Pinnacle Precision Technologies, LLC ranks #34,363 (the upper half of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Pinnacle Precision Technologies, LLC's safety record compare to industry average? ▼
Pinnacle Precision Technologies, LLC's total OSHA penalty of $10,200 is below the Manufacturing industry average of $15,763 per employer. The employer has 3 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Tienergy, LLC in Superior, WI is a similar manufacturing employer with $10,200 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 3 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.