Manufacturing · Oklahoma City, OK

Phoenix Design & Manufacturing LLC

According to OSHA enforcement records (2010–2026), Phoenix Design & Manufacturing LLC ranks #81,555 of 99,447 penalized U.S. employers by total current penalty, with a relatively clean safety record: 1 violations across 2 inspections.

Lower half by penalty100% serious
$1,500
OSHA penalties
1
Violations cited
2
OSHA inspections
#81,555
of 99,447 penalized employers

Phoenix Design & Manufacturing LLC in Oklahoma City, OK has been the subject of 2 OSHA workplace inspections and 1 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $1,500. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Phoenix Design & Manufacturing LLC 2 times over 2 years, roughly annually. These inspections resulted in 1 violation, averaging 0.5 per inspection, on the lighter side. According to OSHA enforcement records, its total current penalty ranks #81,555 of 99,447 penalized U.S. employers (the lower half of penalized employers nationally). Of these, 1 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs moderately below peers (0.8x the sector average) on inspection frequency. For comparison, Griffiths CORP. DBA Wrico Stamping CO. of WI in Menomonee Falls, WI is another manufacturing employer with 2 OSHA inspections on record and $1,500 in current penalties.

0.5
violations per inspection
100.0%
of violations were serious
#81,555
of 99,447 penalized employers

Compliance score

B 83/100
  • B OSHA safety compliance: 1 violation across 2 OSHA inspections (0.5 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How this employer compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Phoenix Design & Manufacturing LLC runs well below peers (0.10x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$1,500 Top 18% most affordable more affordable than 82% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). This entry sits in this band. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Above this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Above this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Phoenix Design & Manufacturing LLC.

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both1.92.022.02.0011.823.635.447.2OSHA inspectionsViolations citedMORRAL COMPANIES, LLC, OSHA inspections: 2 · Violations cited: 21CONTINENTAL MFG. COM…, OSHA inspections: 2 · Violations cited: 41NEW BRUNSWICK SCIENT…, OSHA inspections: 2 · Violations cited: 35US PIPE AND FOUNDRY …, OSHA inspections: 2 · Violations cited: 45GLOBAL ABRASIVE PROD…, OSHA inspections: 2 · Violations cited: 24WILBERT FUNERAL SERV…, OSHA inspections: 2 · Violations cited: 16FIRST BRANDS GROUP, …, OSHA inspections: 2 · Violations cited: 13BELTEX CORPORATION, OSHA inspections: 2 · Violations cited: 12PARKDALE AMERICA, LLC., OSHA inspections: 2 · Violations cited: 18CREATIVE POLYMERS, LLC, OSHA inspections: 2 · Violations cited: 15RAYMOND BUILDING SUP…, OSHA inspections: 2 · Violations cited: 9SUMMIT MILK PRODUCTS…, OSHA inspections: 2 · Violations cited: 6ACCURUS AEROSPACE WI…, OSHA inspections: 2 · Violations cited: 7CRYSTAL GEYSER WATER…, OSHA inspections: 2 · Violations cited: 16H. NAGEL & SON CO., OSHA inspections: 2 · Violations cited: 22LIBERTO MANUFACTURIN…, OSHA inspections: 2 · Violations cited: 8HILAND DAIRY FOODS C…, OSHA inspections: 2 · Violations cited: 3TRI TOWN PRECISION P…, OSHA inspections: 2 · Violations cited: 8ATLAS ASSEMBLY, INC., OSHA inspections: 2 · Violations cited: 5CRYSTAL PRINT, INC., OSHA inspections: 2 · Violations cited: 14Phoenix Design & Man…, OSHA inspections: 2 · Violations cited: 1
Phoenix Design & Manufacturing LLC has 2 OSHA inspections on record and 1 violation cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Phoenix Design & Manufacturing LLC in the Manufacturing enforcement ledger

Manufacturing sector: Phoenix Design & Manufacturing LLC is the #30,963 heaviest OSHA penalty carrier of 35,243 employers with nonzero fines ($1,500).

How Phoenix Design & Manufacturing LLC Compares

Phoenix Design & Manufacturing LLC's 0.50 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs well below peers (0.10x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

2

First Inspection

2016-08-25

Last Inspection

2018-08-14

Inspection Span

2 yrs

Violations / Inspection

0.5

Avg Penalty / Inspection

$750

Industry Avg / Inspection

$6,093

What this shows 2 inspections over 2 years, averaging 0.5 violations per visit. That's $750 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

1

Serious

100.0% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

0

Other-Than-Serious

0.0% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$3,029

Current Penalty Amount

$1,500

Penalty Reduction

50.5%

What this shows Penalties were reduced by $1,529 from the initial assessment of $3,029. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Phoenix Design & Manufacturing LLC compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Phoenix Design & Manufacturing LLC Industry Avg
Inspections 2 2.6
Violations 1 8.0
Total Penalty $1,500 $15,763
Avg Penalty per Inspection $750 $6,093

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Phoenix Design & Manufacturing LLC, both outside OK so the neighborhoods are not geographic containment.

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Compare Phoenix Design & Manufacturing LLC vs Crystal Steel House, INC. side-by-side →

What to do with this record

Use Phoenix Design & Manufacturing LLC's enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Phoenix Design & Manufacturing LLC against Crystal Steel House, INC., a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Phoenix Design & Manufacturing LLC's inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Phoenix Design & Manufacturing LLC safe to work at?
Based on OSHA records, Phoenix Design & Manufacturing LLC's workplace safety record is relatively clean, with fewer violations than typical. The employer has 1 violations across 2 inspections, including 1 serious violations. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does Phoenix Design & Manufacturing LLC have?
Phoenix Design & Manufacturing LLC has 1 OSHA violations on record, including 1 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $1,500.
How many OSHA inspections has Phoenix Design & Manufacturing LLC had?
Phoenix Design & Manufacturing LLC has had 2 OSHA inspections, with the first recorded on 2016-08-25 and the most recent on 2018-08-14. This averages 0.5 violations per inspection.
What is the total penalty amount for Phoenix Design & Manufacturing LLC?
Phoenix Design & Manufacturing LLC has been assessed $1,500 in current OSHA penalties, reduced from an initial assessment of $3,029 (a 50.5% reduction).
Does Phoenix Design & Manufacturing LLC have any serious or willful violations?
Yes. Phoenix Design & Manufacturing LLC has 1 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Phoenix Design & Manufacturing LLC operate in?
Phoenix Design & Manufacturing LLC operates in the Manufacturing sector (NAICS code 336370). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Phoenix Design & Manufacturing LLC rank nationally on OSHA penalties?
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Phoenix Design & Manufacturing LLC ranks #81,555 (the lower half of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Phoenix Design & Manufacturing LLC's safety record compare to industry average?
Phoenix Design & Manufacturing LLC's total OSHA penalty of $1,500 is below the Manufacturing industry average of $15,763 per employer. The employer has 2 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Griffiths CORP. DBA Wrico Stamping CO. of WI in Menomonee Falls, WI is a similar manufacturing employer with $1,500 in current penalties.
Data Sources & Methodology

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 2 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.