PlainWorker
Employers › NY

Manufacturing · Cheektowaga, NY

P&G Steel Products Company, INC.

According to OSHA enforcement records (2010–2026), P&G Steel Products Company, INC. ranks #22,031 of 99,447 penalized U.S. employers by total current penalty, with a concerning safety record: 7 violations across 2 inspections.

Top 25% by penalty100% serious
$16,267
OSHA penalties
7
Violations cited
2
OSHA inspections
#22,031
of 99,447 penalized employers

P&G Steel Products Company, INC. in Cheektowaga, NY has been the subject of 2 OSHA workplace inspections and 7 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $16,267. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected P&G Steel Products Company, INC. 2 times across a longer 8-year span, an infrequent cadence. These inspections resulted in 7 violations, averaging 3.5 per inspection, above what's typical for a single visit. According to OSHA enforcement records, its total current penalty ranks #22,031 of 99,447 penalized U.S. employers (the top quarter of penalized employers nationally). Of these, 7 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs moderately below peers (0.8x the sector average) on inspection frequency. For comparison, Matenaer Corporation in West Bend, WI is another manufacturing employer with 5 OSHA inspections on record and $16,269 in current penalties.

3.5
violations per inspection
100.0%
of violations were serious
#22,031
of 99,447 penalized employers

Compliance score

F 39/100
  • F OSHA safety compliance: 7 violations across 2 OSHA inspections (3.5 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How this employer compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows P&G Steel Products Company, INC. sits roughly in line with peers (1.0x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$16,267 Bottom 22% least affordable more affordable than 22% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Below this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Below this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). This entry sits in this band. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is P&G Steel Products Company, INC..

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both1.92.022.02.00.912.52435.647.1OSHA inspectionsViolations citedLMI FINISHING, INC., OSHA inspections: 2 · Violations cited: 40PLASTIC SYSTEMS, LLC, OSHA inspections: 2 · Violations cited: 27BOB SUMEREL TIRE COM…, OSHA inspections: 2 · Violations cited: 18DOMINION INDUSTRIES, OSHA inspections: 2 · Violations cited: 44GILMAN CHEESE CORP., OSHA inspections: 2 · Violations cited: 15Whitewater Processin…, OSHA inspections: 2 · Violations cited: 6HOMESTEAD PASTA COMP…, OSHA inspections: 2 · Violations cited: 7MINERVA CANNA GROUP …, OSHA inspections: 2 · Violations cited: 14CLEMENT PAPPAS NC, I…, OSHA inspections: 2 · Violations cited: 30BOTTLING GROUP, LLC, OSHA inspections: 2 · Violations cited: 3CREATIVE ENERGY FOOD…, OSHA inspections: 2 · Violations cited: 11PRIMARY PACKAGING, I…, OSHA inspections: 2 · Violations cited: 11CELINA ALUMINUM PREC…, OSHA inspections: 2 · Violations cited: 7LEXINGTON HOMES INC, OSHA inspections: 2 · Violations cited: 45STOUSE, LLC., OSHA inspections: 2 · Violations cited: 4AGRIBAG MANUFACTURIN…, OSHA inspections: 2 · Violations cited: 8HEADCO INDUSTRIES INC., OSHA inspections: 2 · Violations cited: 22SYNERJECT LLC, OSHA inspections: 2 · Violations cited: 12KINEMATICS RESEARCH …, OSHA inspections: 2 · Violations cited: 16MAASS FLANGE CORPORA…, OSHA inspections: 2 · Violations cited: 10P&G Steel Products C…, OSHA inspections: 2 · Violations cited: 7
P&G Steel Products Company, INC. has 2 OSHA inspections on record and 7 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

P&G Steel Products Company, INC. in the Manufacturing enforcement ledger

Manufacturing sector: P&G Steel Products Company, INC. is the #10,493 heaviest OSHA penalty carrier of 35,243 employers with nonzero fines ($16,267).

How P&G Steel Products Company, INC. Compares

P&G Steel Products Company, INC.'s 3.50 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty sits roughly in line with peers (1.0x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

2

First Inspection

2015-10-30

Last Inspection

2024-01-04

Inspection Span

8 yrs

Violations / Inspection

3.5

Avg Penalty / Inspection

$8,134

Industry Avg / Inspection

$6,093

What this shows 2 inspections over 8 years, averaging 3.5 violations per visit. That's $8,134 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

7

Serious

100.0% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

0

Other-Than-Serious

0.0% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$21,689

Current Penalty Amount

$16,267

Penalty Reduction

25.0%

What this shows Penalties were reduced by $5,422 from the initial assessment of $21,689. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How P&G Steel Products Company, INC. compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric P&G Steel Products Company, INC. Industry Avg
Inspections 2 2.6
Violations 7 8.0
Total Penalty $16,267 $15,763
Avg Penalty per Inspection $8,134 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for P&G Steel Products Company, INC., both outside NY so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($16,267 here).

Matenaer Corporation $16,269 WI Western Valve, INC. $16,270 TX Cummins, INC DBA Cummins Emission Solutions $16,273 WI Lab Inventory Systems, INC. $16,260 MD

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (2 inspections here).

Lmi Finishing, INC. 2 insp. Catoosa, OK Plastic Systems, LLC 2 insp. El Paso, TX Bob Sumerel Tire Company INC. 2 insp. Wooster, OH Dominion Industries 2 insp. LA Grange, GA

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Matenaer Corporation
West Bend, WI
5 inspections $16,269
Western Valve, INC.
Amarillo, TX
2 inspections $16,270
Rolling Sharpening Stone
Flower Mound, TX
0 inspections $0
Cummins, INC DBA Cummins Emission Solutions
Mineral Point, WI
2 inspections $16,273
Lab Inventory Systems, INC.
Frederick, MD
2 inspections $16,260

Compare P&G Steel Products Company, INC. vs Matenaer Corporation side-by-side →

What to do with this record

Use P&G Steel Products Company, INC.'s enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare P&G Steel Products Company, INC. against Matenaer Corporation, a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether P&G Steel Products Company, INC.'s inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is P&G Steel Products Company, INC. safe to work at? ▼
Based on OSHA records, P&G Steel Products Company, INC.'s workplace safety record is concerning, with multiple serious compliance issues. The employer has 7 violations across 2 inspections, including 7 serious violations. Compared to Manufacturing industry peers, this is above average for penalties. Review the full inspection history below for details.
How many OSHA violations does P&G Steel Products Company, INC. have? ▼
P&G Steel Products Company, INC. has 7 OSHA violations on record, including 7 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $16,267.
How many OSHA inspections has P&G Steel Products Company, INC. had? ▼
P&G Steel Products Company, INC. has had 2 OSHA inspections, with the first recorded on 2015-10-30 and the most recent on 2024-01-04. This averages 3.5 violations per inspection.
What is the total penalty amount for P&G Steel Products Company, INC.? ▼
P&G Steel Products Company, INC. has been assessed $16,267 in current OSHA penalties, reduced from an initial assessment of $21,689 (a 25.0% reduction).
Does P&G Steel Products Company, INC. have any serious or willful violations? ▼
Yes. P&G Steel Products Company, INC. has 7 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does P&G Steel Products Company, INC. operate in? ▼
P&G Steel Products Company, INC. operates in the Manufacturing sector (NAICS code 332119). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does P&G Steel Products Company, INC. rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, P&G Steel Products Company, INC. ranks #22,031 (the top quarter of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does P&G Steel Products Company, INC.'s safety record compare to industry average? ▼
P&G Steel Products Company, INC.'s total OSHA penalty of $16,267 is above the Manufacturing industry average of $15,763 per employer (1.0x the average). The employer has 2 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Matenaer Corporation in West Bend, WI is a similar manufacturing employer with $16,269 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 2 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.