PlainWorker
Employers › IL

Manufacturing · Des Plaines, IL

Perfect Temperature Control, INC. DBA Fab-Rite Sheet Metal

According to OSHA enforcement records (2010–2026), Perfect Temperature Control, INC. DBA Fab-Rite Sheet Metal has a concerning safety record: 10 violations across 2 inspections. See the full breakdown below.

Upper half by penalty80% serious
$11,820
OSHA penalties
10
Violations cited
2
OSHA inspections
#30,603
of 100,495 penalized employers

Perfect Temperature Control, INC. DBA Fab-Rite Sheet Metal in Des Plaines, IL has been the subject of 2 OSHA workplace inspections and 10 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $11,820. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Perfect Temperature Control, INC. DBA Fab-Rite Sheet Metal 2 times over 1 year - more than twice a year on average. These inspections resulted in 10 violations, averaging 5.0 per inspection - a notably high rate. Its total OSHA penalty ranks in the upper half of penalized employers nationally. Of these, 8 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs moderately below peers (0.8x the sector average) on inspection frequency. For comparison, L & K Mills, INC. in Benton, PA is another manufacturing employer with 2 OSHA inspections on record and $11,820 in current penalties.

5.0
violations per inspection
80.0%
of violations were serious
70%
of penalized employers rank lower

How this employer compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Perfect Temperature Control, INC. DBA Fab-Rite Sheet Metal runs moderately below peers (0.8x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$11,820 Bottom 30% least affordable more affordable than 30% of 100,495 U.S. employers with a penalty

$0–$5,000: 44,435 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,628 U.S. employers with a penalty (21%). Below this entry. $10,000–$15,000: 11,165 U.S. employers with a penalty (11%). This entry sits in this band. $15,000–$20,000: 6,629 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,205 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,885 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,052 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,483 U.S. employers with a penalty (1%). Above this entry. $40,000–$45,000: 1,120 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 792 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,101 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

What the Data Says About Perfect Temperature Control, INC. DBA Fab-Rite Sheet Metal

The federal enforcement record for Perfect Temperature Control, INC. DBA Fab-Rite Sheet Metal in Des Plaines, IL includes 2 OSHA inspections and 10 violations, translating to 5.00 violations per inspection. Of those violations, 8 (80.0%) were classified as serious, 0 (0.0%) as willful, and 0 (0.0%) as repeat. Serious violations denote hazards likely to cause death or serious physical harm; willful and repeat categories indicate intentional disregard or recurrence of previously cited hazards.

OSHA assessed $17,500 in initial penalties against this employer, later adjusted to a current total of $11,820 - a 32.5% reduction. Average penalty per inspection works out to $5,910. Against the Manufacturing industry average of $15,410 per employer, this record runs moderately below peers (0.8x the sector average).

Inspection activity spans from 2015-11-09 to 2015-11-09, a window of roughly 1 year.

Enforcement detail

OSHA Inspection History

Total Inspections

2

First Inspection

2015-11-09

Last Inspection

2015-11-09

Inspection Span

1 yr

Violations / Inspection

5.0

Avg Penalty / Inspection

$5,910

Industry Avg / Inspection

$6,092

What this shows 2 inspections over 1 year, averaging 5.0 violations per visit. That's $5,910 per inspection vs. the Manufacturing average of $6,092.

Enforcement detail

Violation Breakdown

8

Serious

80.0% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

2

Other-Than-Serious

20.0% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$17,500

Current Penalty Amount

$11,820

Penalty Reduction

32.5%

What this shows Penalties were reduced by $5,680 from the initial assessment of $17,500. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Perfect Temperature Control, INC. DBA Fab-Rite Sheet Metal compares to the Manufacturing sector, which has 45,665 employers tracked by PlainWorker.

Metric Perfect Temperature Control, INC. DBA Fab-Rite Sheet Metal Industry Avg
Inspections 2 2.5
Violations 10 7.8
Total Penalty $11,820 $15,410
Avg Penalty per Inspection $5,910 $6,092
View all 45,665 employers in Manufacturing →

Nearby & Similar Employers in Manufacturing

L & K Mills, INC.
Benton, PA
2 inspections $11,820
Advanced Graphics Technologies
Grapevine, TX
2 inspections $11,820
Poly-Flex, INC.
Walworth, WI
2 inspections $11,820
Branding Iron Holdings, INC. DBA Holten Meat INC.
East Saint Louis, IL
4 inspections $11,823
General Motors Corporation
Wentzville, MO
3 inspections $11,823

Compare Perfect Temperature Control, INC. DBA Fab-Rite Sheet Metal vs L & K Mills, INC. side-by-side →

Frequently Asked Questions

Is Perfect Temperature Control, INC. DBA Fab-Rite Sheet Metal safe to work at? ▼
Based on OSHA records, Perfect Temperature Control, INC. DBA Fab-Rite Sheet Metal's workplace safety record is concerning, with multiple serious compliance issues. The employer has 10 violations across 2 inspections, including 8 serious violations. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does Perfect Temperature Control, INC. DBA Fab-Rite Sheet Metal have? ▼
Perfect Temperature Control, INC. DBA Fab-Rite Sheet Metal has 10 OSHA violations on record, including 8 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $11,820.
How many OSHA inspections has Perfect Temperature Control, INC. DBA Fab-Rite Sheet Metal had? ▼
Perfect Temperature Control, INC. DBA Fab-Rite Sheet Metal has had 2 OSHA inspections, with the first recorded on 2015-11-09 and the most recent on 2015-11-09. This averages 5.0 violations per inspection.
What is the total penalty amount for Perfect Temperature Control, INC. DBA Fab-Rite Sheet Metal? ▼
Perfect Temperature Control, INC. DBA Fab-Rite Sheet Metal has been assessed $11,820 in current OSHA penalties, reduced from an initial assessment of $17,500 (a 32.5% reduction).
Does Perfect Temperature Control, INC. DBA Fab-Rite Sheet Metal have any serious or willful violations? ▼
Yes. Perfect Temperature Control, INC. DBA Fab-Rite Sheet Metal has 8 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Perfect Temperature Control, INC. DBA Fab-Rite Sheet Metal operate in? ▼
Perfect Temperature Control, INC. DBA Fab-Rite Sheet Metal operates in the Manufacturing sector (NAICS code 332322). This industry has 45,665 employers tracked by PlainWorker, with 115,522 total OSHA inspections and $703.72M in cumulative penalties.
How does Perfect Temperature Control, INC. DBA Fab-Rite Sheet Metal's safety record compare to industry average? ▼
Perfect Temperature Control, INC. DBA Fab-Rite Sheet Metal's total OSHA penalty of $11,820 is below the Manufacturing industry average of $15,410 per employer. The employer has 2 inspections compared to the industry average of 2.5 per employer. For a direct comparison, L & K Mills, INC. in Benton, PA is a similar manufacturing employer with $11,820 in current penalties.

Explore PlainWorker

Manufacturing Industry

All 45,665 employers in this sector
Employers in IL

All inspected employers in this state
Safety Rankings

Most penalized, repeat violators & more

What to check next

Perfect Temperature Control, INC. DBA Fab-Rite Sheet Metal's record is one establishment in a larger pattern. Use it as a research checklist, not a verdict on the employer overall.

  • See how Perfect Temperature Control, INC. DBA Fab-Rite Sheet Metal compares to the 45,665 other employers in Manufacturing. Manufacturing record
  • Put this employer head-to-head with another on inspections, penalties, and back wages. Compare employers
  • Review the full OSHA & wage-enforcement picture for IL. IL state record

These figures are the federal enforcement record on file and reflect past inspections, not a statement about current workplace conditions. See the disclaimer for how to read them.

Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 2 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.