Manufacturing · Columbus, OH

Panacea Products Corporation

According to OSHA enforcement records (2010–2026), Panacea Products Corporation ranks #15,580 of 99,447 penalized U.S. employers by total current penalty, with a concerning safety record: 13 violations across 4 inspections.

Top 25% by penalty69% serious

Compiled by Plainworker · September 6, 2026

$22,100
OSHA penalties: 13
Violations cited: 4
OSHA inspections: #15,580
of 99,447 penalized employers

Panacea Products Corporation in Columbus, OH has been the subject of 4 OSHA workplace inspections and 13 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $22,100. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Panacea Products Corporation 4 times across a longer 12-year span, an infrequent cadence. These inspections resulted in 13 violations, averaging 3.3 per inspection, above what's typical for a single visit. According to OSHA enforcement records, its total current penalty ranks #15,580 of 99,447 penalized U.S. employers (the top quarter of penalized employers nationally). Of these, 9 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs moderately above peers (1.5x the sector average) on inspection frequency. For comparison, BWP Hardwoods, INC. in Brookville, PA is another manufacturing employer with 3 OSHA inspections on record and $22,100 in current penalties.

3.3
violations per inspection: 69.2%
of violations were serious: #15,580
of 99,447 penalized employers

Compliance score

F 43/100

F OSHA safety compliance: 13 violations across 4 OSHA inspections (3.3 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

Panacea Products Corpo…

$22,100
Manufacturing avg

$15,763

What this shows Panacea Products Corporation runs moderately above peers (1.4x the sector average) in total OSHA penalties.

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$22,100 Bottom 16% least affordable more affordable than 16% of 99,447 U.S. employers with a penalty

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Panacea Products Corporation.

Panacea Products Corporation has 4 OSHA inspections on record and 13 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Panacea Products Corporation in the Manufacturing enforcement ledger

Among 35,243 Manufacturing employers with OSHA penalties on file, Panacea Products Corporation ranks #7,593 at $22,100 current penalty.

How Panacea Products Corporation Compares

Panacea Products Corporation's 3.25 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs moderately above peers (1.4x the sector average).

Total Inspections

First Inspection

2010-09-16

Last Inspection

2023-02-01

Inspection Span

12 yrs

Violations / Inspection

3.3

Avg Penalty / Inspection

$5,525

Industry Avg / Inspection

$6,093

What this shows 4 inspections over 12 years, averaging 3.3 violations per visit. That's $5,525 per inspection vs. the Manufacturing average of $6,093.

Serious

69.2% of total

Willful

0.0% of total

Repeat

0.0% of total

Other-Than-Serious

30.8% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Initial Penalty Assessed

$37,100

Current Penalty Amount

$22,100

Penalty Reduction

40.4%

What this shows Penalties were reduced by $15,000 from the initial assessment of $37,100. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Panacea Products Corporation compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric	Panacea Products Corporation	Industry Avg
Inspections	4	2.6
Violations	13	8.0
Total Penalty	$22,100	$15,763
Avg Penalty per Inspection	$5,525	$6,093

View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Panacea Products Corporation, both outside OH so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($22,100 here).

Dimar Manufacturing Corporation $22,100 NY Concord Tool & Manufacturing INC $22,100 MI Telsmith, INC. $22,100 WI BWP Hardwoods, INC. $22,100 PA

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (4 inspections here).

JSL Foods, INC. 4 insp. Los Angeles, CA Process Manufacturing Company, INC. 4 insp. Tulsa, OK The Turner Company LLP 4 insp. Rhome, TX JSL Foods, INC. 4 insp. Lincoln Heights, CA

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Dimar Manufacturing Corporation

Clarence, NY

2 inspections $22,100

Concord Tool & Manufacturing INC

Mount Clemens, MI

3 inspections $22,100

Telsmith, INC.

Mequon, WI

5 inspections $22,100

BWP Hardwoods, INC.

Brookville, PA

3 inspections $22,100

Structural Steel Services

Meridian, MS

2 inspections $22,100

Compare Panacea Products Corporation vs Dimar Manufacturing Corporation side-by-side →

What to do with this record

Use Panacea Products Corporation's enforcement history as one data point, not the whole picture.

A single employer's record can look unusual in isolation. Compare Panacea Products Corporation against Dimar Manufacturing Corporation, a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
See whether Panacea Products Corporation's inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Panacea Products Corporation safe to work at? ▼

Based on OSHA records, Panacea Products Corporation's workplace safety record is concerning, with multiple serious compliance issues. The employer has 13 violations across 4 inspections, including 9 serious violations. Compared to Manufacturing industry peers, this is above average for penalties. Review the full inspection history below for details.

How many OSHA violations does Panacea Products Corporation have? ▼

Panacea Products Corporation has 13 OSHA violations on record, including 9 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $22,100.

How many OSHA inspections has Panacea Products Corporation had? ▼

Panacea Products Corporation has had 4 OSHA inspections, with the first recorded on 2010-09-16 and the most recent on 2023-02-01. This averages 3.3 violations per inspection.

What is the total penalty amount for Panacea Products Corporation? ▼

Panacea Products Corporation has been assessed $22,100 in current OSHA penalties, reduced from an initial assessment of $37,100 (a 40.4% reduction).

Does Panacea Products Corporation have any serious or willful violations? ▼

Yes. Panacea Products Corporation has 9 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.

What industry does Panacea Products Corporation operate in? ▼

Panacea Products Corporation operates in the Manufacturing sector (NAICS code 332618). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.

Where does Panacea Products Corporation rank nationally on OSHA penalties? ▼

Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Panacea Products Corporation ranks #15,580 (the top quarter of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.

How does Panacea Products Corporation's safety record compare to industry average? ▼

Panacea Products Corporation's total OSHA penalty of $22,100 is above the Manufacturing industry average of $15,763 per employer (1.4x the average). The employer has 4 inspections compared to the industry average of 2.6 per employer. For a direct comparison, BWP Hardwoods, INC. in Brookville, PA is a similar manufacturing employer with $22,100 in current penalties.

Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.