PlainWorker
Employers › AL

Manufacturing · Calvert, AL

Outokumpu Stainless USA, LLC

According to OSHA enforcement records (2010–2026), Outokumpu Stainless USA, LLC has a relatively clean safety record: 0 violations across 2 inspections. See the full breakdown below.

$0
OSHA penalties
0
Violations cited
2
OSHA inspections
$0
Back wages owed

Outokumpu Stainless USA, LLC in Calvert, AL has been the subject of 2 OSHA workplace inspections and 0 citations since 2010, according to enforcement records from the U.S. Department of Labor. Federal wage-and-hour enforcement records also show 1 WHD violation against this employer under the Fair Labor Standards Act. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Outokumpu Stainless USA, LLC 2 times across a longer 6-year span, an infrequent cadence. None of these inspections resulted in a citation. Against the Manufacturing industry average of 3 inspections per employer, this runs moderately below peers (0.8x the sector average) on inspection frequency. The Department of Labor also found wage violations, with $0 in back wages owed to an undisclosed number of workers. For comparison, Phelps Dodge Refining Corporation in El Paso, TX is another manufacturing employer with 3 OSHA inspections on record and $0 in current penalties.

0.0
violations per inspection
0.0%
of violations were serious
$0
in back wages recovered

Compliance score

A 91/100
  • A OSHA safety compliance: 0 violations across 2 OSHA inspections (0.0 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.
  • A Wage & hour compliance: $0 in back wages owed across 1 WHD case ($0 per case), vs. national p10 $2K (best) / p90 $58K (worst) among 91,622 employers with a WHD case on file.
Open my watchlist

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Outokumpu Stainless USA, LLC.

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both1.92.022.02.0014.228.442.556.7OSHA inspectionsViolations citedNELCON, INC., OSHA inspections: 2 · Violations cited: 32COLUMBIA CEDAR INC, OSHA inspections: 2 · Violations cited: 44AMERICAN FELT & FILT…, OSHA inspections: 2 · Violations cited: 54PARKER TRUTEC, INC., OSHA inspections: 2 · Violations cited: 12RBC-WEST TRENTON A D…, OSHA inspections: 2 · Violations cited: 25KIEWIT OFFSHORE SERV…, OSHA inspections: 2 · Violations cited: 0DFA DAIRY BRANDS FLU…, OSHA inspections: 2 · Violations cited: 17QUALITY CULVERT INC, OSHA inspections: 2 · Violations cited: 16FLANDERS PROVISION C…, OSHA inspections: 2 · Violations cited: 7BLACK BAY VENTURES V…, OSHA inspections: 2 · Violations cited: 16STEWARD PLASTICS, INC., OSHA inspections: 2 · Violations cited: 7MANNING'S BEEF, LLC, OSHA inspections: 2 · Violations cited: 9MOUNTAIN WEST PRODUC…, OSHA inspections: 2 · Violations cited: 4SOS PRESCOTT, INC., OSHA inspections: 2 · Violations cited: 15POLYCHEM CORPORATION, OSHA inspections: 2 · Violations cited: 10AQUAMAR, INC., OSHA inspections: 2 · Violations cited: 8DAL-TILE TENNESSEE, …, OSHA inspections: 2 · Violations cited: 23SEPTEMBER ENDS CO., OSHA inspections: 2 · Violations cited: 6EZZO SAUSAGE COMPANY, OSHA inspections: 2 · Violations cited: 7CASCADES HOLDING US …, OSHA inspections: 2 · Violations cited: 29Outokumpu Stainless …, OSHA inspections: 2 · Violations cited: 0
Outokumpu Stainless USA, LLC has 2 OSHA inspections on record and 0 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

How Outokumpu Stainless USA, LLC Compares

2 OSHA inspections on record for Outokumpu Stainless USA, LLC in Calvert, AL, zero violations cited, a cleaner record than the Manufacturing sector average of 8.0 violations per employer.

No OSHA penalty has been assessed against Outokumpu Stainless USA, LLC to date. The Manufacturing sector average runs $15,763 per employer.

Enforcement detail

OSHA Inspection History

Total Inspections

2

First Inspection

2017-06-26

Last Inspection

2023-04-19

Inspection Span

6 yrs

Violations / Inspection

0.0

Avg Penalty / Inspection

$0

Industry Avg / Inspection

$6,093

What this shows 2 inspections over 6 years, averaging 0.0 violations per visit. That's $0 per inspection vs. the Manufacturing average of $6,093.

Wage & Hour Findings

WHD Cases
1
Back Wages Owed
$0
Employees Affected
0
WHD Violations
1

Industry Safety Context: Manufacturing

How Outokumpu Stainless USA, LLC compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Outokumpu Stainless USA, LLC Industry Avg
Inspections 2 2.6
Violations 0 8.0
Total Penalty $0 $15,763
Avg Penalty per Inspection $0 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Outokumpu Stainless USA, LLC, both outside AL so the neighborhoods are not geographic containment.

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (2 inspections here).

Nelcon, INC. 2 insp. Laurel, MT Columbia Cedar INC 2 insp. Kettle Falls, WA American Felt & Filter CO 2 insp. New Windsor, NY Parker Trutec, INC. 2 insp. Springfield, OH

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Phelps Dodge Refining Corporation
El Paso, TX
3 inspections $0
NC Stone
San Jose, CA
2 inspections $0
Corning Incorporated
Midland, NC
2 inspections $0
Multiquip, INC. DBA MQ Whiteman
Boise, ID
2 inspections $0
Bowman Manufacturing NW
Post Falls, ID
2 inspections $0

Compare Outokumpu Stainless USA, LLC vs Phelps Dodge Refining Corporation side-by-side →

What to do with this record

Use Outokumpu Stainless USA, LLC's enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Outokumpu Stainless USA, LLC against Phelps Dodge Refining Corporation, a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Outokumpu Stainless USA, LLC's inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Outokumpu Stainless USA, LLC also carries $0 in Wage and Hour Division back-wages, a separate enforcement track from OSHA safety violations. How wage-theft enforcement works

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Outokumpu Stainless USA, LLC safe to work at? ▼
Based on OSHA records, Outokumpu Stainless USA, LLC's workplace safety record is relatively clean, with fewer violations than typical. The employer has 0 violations across 2 inspections. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does Outokumpu Stainless USA, LLC have? ▼
Outokumpu Stainless USA, LLC has 0 OSHA violations on record, including 0 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $0.
How many OSHA inspections has Outokumpu Stainless USA, LLC had? ▼
Outokumpu Stainless USA, LLC has had 2 OSHA inspections, with the first recorded on 2017-06-26 and the most recent on 2023-04-19. This averages 0.0 violations per inspection.
What is the total penalty amount for Outokumpu Stainless USA, LLC? ▼
Outokumpu Stainless USA, LLC has been assessed $0 in current OSHA penalties. Additionally, $0 in back wages were owed through WHD enforcement.
Has Outokumpu Stainless USA, LLC been cited for wage theft? ▼
Yes. The Department of Labor's Wage and Hour Division has recorded 1 enforcement case against Outokumpu Stainless USA, LLC, resulting in $0 in back wages owed to an undisclosed number of workers. These cases involve violations of federal labor laws including minimum wage, overtime, and other worker protections.
What industry does Outokumpu Stainless USA, LLC operate in? ▼
Outokumpu Stainless USA, LLC operates in the Manufacturing sector (NAICS code 331512). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
What should I do if Outokumpu Stainless USA, LLC owes me wages? ▼
If you believe Outokumpu Stainless USA, LLC owes you wages, you can file a complaint with the Department of Labor's Wage and Hour Division at dol.gov/agencies/whd/contact/complaints or by calling 1-866-487-9243. WHD investigates violations of the Fair Labor Standards Act including unpaid minimum wage, overtime, and unauthorized deductions. The DOL has previously found $0 in back wages owed by this employer across 1 case.
How does Outokumpu Stainless USA, LLC's safety record compare to industry average? ▼
Outokumpu Stainless USA, LLC's total OSHA penalty of $0 is below the Manufacturing industry average of $15,763 per employer. The employer has 2 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Phelps Dodge Refining Corporation in El Paso, TX is a similar manufacturing employer with $0 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 2 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.