PlainWorker
Employers › MI

Manufacturing · Romulus, MI

Optimum Modular LLC DBA Ginosko Modular

According to OSHA enforcement records (2010–2026), Optimum Modular LLC DBA Ginosko Modular ranks #47,436 of 99,447 penalized U.S. employers by total current penalty, with a mixed safety record: 7 violations across 3 inspections.

Upper half by penalty29% serious
$6,600
OSHA penalties
7
Violations cited
3
OSHA inspections
#47,436
of 99,447 penalized employers

Optimum Modular LLC DBA Ginosko Modular in Romulus, MI has been the subject of 3 OSHA workplace inspections and 7 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $6,600. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Optimum Modular LLC DBA Ginosko Modular 3 times over 1 year - more than twice a year on average. These inspections resulted in 7 violations, averaging 2.3 per inspection, above what's typical for a single visit. According to OSHA enforcement records, its total current penalty ranks #47,436 of 99,447 penalized U.S. employers (the upper half of penalized employers nationally). Of these, 2 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this sits roughly in line with peers (1.2x the sector average) on inspection frequency. For comparison, Double H Tennessee LLC in Morristown, TN is another manufacturing employer with 2 OSHA inspections on record and $6,600 in current penalties.

2.3
violations per inspection
28.6%
of violations were serious
#47,436
of 99,447 penalized employers

Compliance score

D 56/100
  • D OSHA safety compliance: 7 violations across 3 OSHA inspections (2.3 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How this employer compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Optimum Modular LLC DBA Ginosko Modular runs moderately below peers (0.4x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$6,600 Bottom 48% least affordable more affordable than 48% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). This entry sits in this band. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Above this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Optimum Modular LLC DBA Ginosko Modular.

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both3.03.033.03.01.88.214.520.827.1OSHA inspectionsViolations citedA-BRITE PLATING COMP…, OSHA inspections: 3 · Violations cited: 17SUOMINEN US HOLDINGS…, OSHA inspections: 3 · Violations cited: 22NIDRA LLC, OSHA inspections: 3 · Violations cited: 26ARCELORMITTAL, OSHA inspections: 3 · Violations cited: 21AMTECH SOUTHEAST LLC, OSHA inspections: 3 · Violations cited: 18TENNECO-WALKER MANUF…, OSHA inspections: 3 · Violations cited: 10COSMEC, INC., OSHA inspections: 3 · Violations cited: 15SHERMAN ROTO TANK, LLC, OSHA inspections: 3 · Violations cited: 20STELLA-JONES CORPORA…, OSHA inspections: 3 · Violations cited: 3APEL CONSTRUCTION SE…, OSHA inspections: 3 · Violations cited: 11ARSENAL COMMUNICATIO…, OSHA inspections: 3 · Violations cited: 14ADVANTAGE SALES & SU…, OSHA inspections: 3 · Violations cited: 5CUMAR INC., OSHA inspections: 3 · Violations cited: 16UFP MOULTRIE, LLC, OSHA inspections: 3 · Violations cited: 4EXTRUSIONS INC, OSHA inspections: 3 · Violations cited: 6CALLAWAY FARMS MANUF…, OSHA inspections: 3 · Violations cited: 26MAF INDUSTRIES INC, OSHA inspections: 3 · Violations cited: 4INDIAN RIVER BEVERAG…, OSHA inspections: 3 · Violations cited: 8DUNN PALLET CO., OSHA inspections: 3 · Violations cited: 3POLYMER CORPORATION, OSHA inspections: 3 · Violations cited: 19Optimum Modular LLC …, OSHA inspections: 3 · Violations cited: 7
Optimum Modular LLC DBA Ginosko Modular has 3 OSHA inspections on record and 7 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Optimum Modular LLC DBA Ginosko Modular in the Manufacturing enforcement ledger

In Manufacturing, Optimum Modular LLC DBA Ginosko Modular sits at penalty rank #20,419 of 35,243 penalized establishments ($6,600 assessed).

How Optimum Modular LLC DBA Ginosko Modular Compares

Optimum Modular LLC DBA Ginosko Modular's 2.33 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs moderately below peers (0.4x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

3

First Inspection

2025-03-14

Last Inspection

2025-08-13

Inspection Span

1 yr

Violations / Inspection

2.3

Avg Penalty / Inspection

$2,200

Industry Avg / Inspection

$6,093

What this shows 3 inspections over 1 year, averaging 2.3 violations per visit. That's $2,200 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

2

Serious

28.6% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

5

Other-Than-Serious

71.4% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$10,100

Current Penalty Amount

$6,600

Penalty Reduction

34.7%

What this shows Penalties were reduced by $3,500 from the initial assessment of $10,100. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Optimum Modular LLC DBA Ginosko Modular compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Optimum Modular LLC DBA Ginosko Modular Industry Avg
Inspections 3 2.6
Violations 7 8.0
Total Penalty $6,600 $15,763
Avg Penalty per Inspection $2,200 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Optimum Modular LLC DBA Ginosko Modular, both outside MI so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($6,600 here).

Paul's Chrome Plating, Incorporated $6,600 PA Double H Tennessee LLC $6,600 TN Meritor Heavy Vehicle Systems, LLC $6,600 TN Walco Fabricating, INC. $6,600 PA

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (3 inspections here).

A-Brite Plating Company 3 insp. Cleveland, OH Suominen US Holdings, INC. 3 insp. Green Bay, WI Nidra LLC 3 insp. Chesapeake, VA Arcelormittal 3 insp. Vinton, TX

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Paul's Chrome Plating, Incorporated
Evans City, PA
2 inspections $6,600
Double H Tennessee LLC
Morristown, TN
2 inspections $6,600
General Bearing Corporation
Milford, MI
3 inspections $6,600
Meritor Heavy Vehicle Systems, LLC
Morristown, TN
2 inspections $6,600
Walco Fabricating, INC.
Pottsville, PA
3 inspections $6,600

Compare Optimum Modular LLC DBA Ginosko Modular vs Paul's Chrome Plating, Incorporated side-by-side →

What to do with this record

Use Optimum Modular LLC DBA Ginosko Modular's enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Optimum Modular LLC DBA Ginosko Modular against Paul's Chrome Plating, Incorporated, a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Optimum Modular LLC DBA Ginosko Modular's inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Optimum Modular LLC DBA Ginosko Modular safe to work at? ▼
Based on OSHA records, Optimum Modular LLC DBA Ginosko Modular's workplace safety record is mixed, with some compliance concerns. The employer has 7 violations across 3 inspections, including 2 serious violations. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does Optimum Modular LLC DBA Ginosko Modular have? ▼
Optimum Modular LLC DBA Ginosko Modular has 7 OSHA violations on record, including 2 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $6,600.
How many OSHA inspections has Optimum Modular LLC DBA Ginosko Modular had? ▼
Optimum Modular LLC DBA Ginosko Modular has had 3 OSHA inspections, with the first recorded on 2025-03-14 and the most recent on 2025-08-13. This averages 2.3 violations per inspection.
What is the total penalty amount for Optimum Modular LLC DBA Ginosko Modular? ▼
Optimum Modular LLC DBA Ginosko Modular has been assessed $6,600 in current OSHA penalties, reduced from an initial assessment of $10,100 (a 34.7% reduction).
Does Optimum Modular LLC DBA Ginosko Modular have any serious or willful violations? ▼
Yes. Optimum Modular LLC DBA Ginosko Modular has 2 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Optimum Modular LLC DBA Ginosko Modular operate in? ▼
Optimum Modular LLC DBA Ginosko Modular operates in the Manufacturing sector (NAICS code 321991). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Optimum Modular LLC DBA Ginosko Modular rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Optimum Modular LLC DBA Ginosko Modular ranks #47,436 (the upper half of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Optimum Modular LLC DBA Ginosko Modular's safety record compare to industry average? ▼
Optimum Modular LLC DBA Ginosko Modular's total OSHA penalty of $6,600 is below the Manufacturing industry average of $15,763 per employer. The employer has 3 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Double H Tennessee LLC in Morristown, TN is a similar manufacturing employer with $6,600 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 3 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.