Public Administration · BRONX, NY

NYCPD 40 PCT

OSHA records show a relatively clean safety record: 2 violations across 2 inspections — below the Public Administration industry average for penalties.

Reviewed byPlainworker Editorial, Workplace Safety Editorial Team · June 10, 2026

2
OSHA inspections: 2
Violations cited: $0
OSHA penalties

NYCPD 40 PCT in BRONX, NY has been the subject of 2 OSHA workplace inspections and 2 citations since 2010, according to enforcement records from the U.S. Department of Labor. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

NYCPD 40 PCT has been inspected 2 times by OSHA over 1 year. These inspections resulted in 2 violations, averaging 1.0 violations per inspection. Compared to the Public Administration industry average of 3 inspections per employer, NYCPD 40 PCT has been inspected fewer frequently.

1.0
violations per inspection: 0.0%
of violations were serious

What the Data Says About NYCPD 40 PCT

The federal enforcement record for NYCPD 40 PCT in BRONX, NY includes 2 OSHA inspections and 2 violations, translating to 1.00 violations per inspection. Of those violations, 0 (0.0%) were classified as serious, 0 (0.0%) as willful, and 0 (0.0%) as repeat. Serious violations denote hazards likely to cause death or serious physical harm; willful and repeat categories indicate intentional disregard or recurrence of previously cited hazards.

OSHA assessed $0 in initial penalties against this employer, later adjusted to a current total of $0 — no reduction from the original assessment. Average penalty per inspection works out to $0. Against the Public Administration industry average of $2,355 per employer, this record runs below peers.

Inspection activity spans from 2012-10-10 to 2013-11-14, a window of roughly 1 year. This record draws directly from the U.S. Department of Labor's public enforcement data at data.dol.gov. Penalty amounts reflect final adjudicated figures after any settlement, informal conference, or formal contest. Workers, journalists, and researchers can use these figures to compare this employer's compliance posture against industry peers and to identify workplaces with elevated safety risks or repeat non-compliance.

OSHA Inspection History

Total Inspections

First Inspection

2012-10-10

Last Inspection

2013-11-14

Inspection Span

1 year

Violations per Inspection

1.0

Avg Penalty per Inspection

Industry Avg per Inspection

$757

Violation Breakdown

Serious

0.0% of total

Willful

0.0% of total

Repeat

0.0% of total

Other-Than-Serious

100.0% of total

Industry Safety Context: Public Administration

How NYCPD 40 PCT compares to the Public Administration sector, which has 9,547 employers tracked by PlainWorker.

Metric	NYCPD 40 PCT	Industry Avg
Inspections	2	3.1
Violations	2	6.4
Total Penalty	$0	$2,355
Avg Penalty per Inspection	$0	$757

View all 9,547 employers in Public Administration →

Explore related data

Public Administration safety record →

Inspections, violations, and penalties across the Public Administration sector.

NY enforcement →

Top violators and statewide OSHA & WHD totals for NY.

Most-penalized employers →

The 100 employers carrying the heaviest OSHA penalties nationwide.

Workplace Safety Guides

Understanding OSHA Inspections

What triggers an inspection and what to expect during the process

How to Read an OSHA Inspection Report

Decode violation types, penalty amounts, and compliance outcomes

Your Rights Under OSHA

Know your workplace safety rights and how to exercise them

Wage Theft Explained

Common forms of wage theft and how to recover unpaid wages

Most Dangerous Industries

Which industries face the highest rates of violations and penalties

Industries With Most OSHA Violations

Data-driven breakdown of violation leaders by sector

Nearby & Similar Employers in Public Administration

MD Dept. Of Public Safety and Corrections

BALTIMORE, MD

0 inspections $0

Fannin County Jail/Detention Center

KING COUNTY METRO TRANSIT

Compare NYCPD 40 PCT vs MD Dept. Of Public Safety and Corrections side-by-side →

Frequently Asked Questions

Is NYCPD 40 PCT safe to work at? ▼

Based on OSHA records, NYCPD 40 PCT's workplace safety record is relatively clean, with fewer violations than typical. The employer has 2 violations across 2 inspections. Compared to Public Administration industry peers, this is below average for penalties. Review the full inspection history below for details.

How many OSHA violations does NYCPD 40 PCT have? ▼

NYCPD 40 PCT has 2 OSHA violations on record, including 0 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $0.

How many OSHA inspections has NYCPD 40 PCT had? ▼

NYCPD 40 PCT has had 2 OSHA inspections, with the first recorded on 2012-10-10 and the most recent on 2013-11-14. This averages 1.0 violations per inspection.

What is the total penalty amount for NYCPD 40 PCT? ▼

NYCPD 40 PCT has been assessed $0 in current OSHA penalties.

What industry does NYCPD 40 PCT operate in? ▼

NYCPD 40 PCT operates in the Public Administration sector (NAICS code 922120). This industry has 9,547 employers tracked by PlainWorker, with 29,708 total OSHA inspections and $22.49M in cumulative penalties.

What are my rights if I work at NYCPD 40 PCT? ▼

Under the Occupational Safety and Health Act, employees at NYCPD 40 PCT have the right to a safe workplace, the right to report hazards without retaliation, the right to request an OSHA inspection, and the right to access their own exposure and medical records. Workers can also refuse dangerous work if they believe they face imminent danger and their employer has failed to address the hazard.

How do I file an OSHA complaint against NYCPD 40 PCT? ▼

You can file a complaint with OSHA online at osha.gov/workers/file-complaint, by calling 1-800-321-OSHA (6742), or by visiting your local OSHA area office. Complaints can be filed confidentially. OSHA is required to respond to all complaints and will prioritize those alleging imminent danger. You are protected from employer retaliation under Section 11(c) of the OSH Act.

How does NYCPD 40 PCT's safety record compare to industry average? ▼

NYCPD 40 PCT's total OSHA penalty of $0 is below the Public Administration industry average of $2,355 per employer. The employer has 2 inspections compared to the industry average of 3.1 per employer.

Explore PlainWorker

Public Administration Industry

All 9,547 employers in this sector

Employers in NY

All inspected employers in this state

Safety Rankings

Most penalized, repeat violators & more

Related Data Sources

Safety Grade on PlainSafetyScore → Salary Data on WageDex → Labor Market on PlainLabor → Workforce Data on PlainEmploy →

Data Sources & Methodology

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.