PlainWorker
Employers › AZ

Manufacturing · Tempe, AZ

NTH Degree Technologies Worldwide INC.

According to OSHA enforcement records (2010–2026), NTH Degree Technologies Worldwide INC. ranks #78,998 of 99,447 penalized U.S. employers by total current penalty, with a mixed safety record: 7 violations across 3 inspections.

Lower half by penalty14% serious
$1,750
OSHA penalties
7
Violations cited
3
OSHA inspections
#78,998
of 99,447 penalized employers

NTH Degree Technologies Worldwide INC. in Tempe, AZ has been the subject of 3 OSHA workplace inspections and 7 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $1,750. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected NTH Degree Technologies Worldwide INC. 3 times over 1 year - more than twice a year on average. These inspections resulted in 7 violations, averaging 2.3 per inspection, above what's typical for a single visit. According to OSHA enforcement records, its total current penalty ranks #78,998 of 99,447 penalized U.S. employers (the lower half of penalized employers nationally). Of these, 1 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this sits roughly in line with peers (1.2x the sector average) on inspection frequency. For comparison, Sapa Industrial Extrusions INC in Spanish Fork, UT is another manufacturing employer with 2 OSHA inspections on record and $1,750 in current penalties.

2.3
violations per inspection
14.3%
of violations were serious
#78,998
of 99,447 penalized employers

Compliance score

D 56/100
  • D OSHA safety compliance: 7 violations across 3 OSHA inspections (2.3 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How this employer compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows NTH Degree Technologies Worldwide INC. runs well below peers (0.11x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$1,750 Top 21% most affordable more affordable than 79% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). This entry sits in this band. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Above this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Above this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is NTH Degree Technologies Worldwide INC..

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both3.03.033.03.01.316.231.045.960.7OSHA inspectionsViolations citedART STONE-GRANITE & …, OSHA inspections: 3 · Violations cited: 19MARIETTA CORPORATION, OSHA inspections: 3 · Violations cited: 30INLAND EMPIRE TRUSS,…, OSHA inspections: 3 · Violations cited: 19INSINGER MACHINE COM…, OSHA inspections: 3 · Violations cited: 58DALTON CORPORATION, OSHA inspections: 3 · Violations cited: 13OLD CASTLE APG NORTH…, OSHA inspections: 3 · Violations cited: 9C.W. BROWN FOODS, INC., OSHA inspections: 3 · Violations cited: 11WHITESELL CORPORATION, OSHA inspections: 3 · Violations cited: 18C & B LUMBER, OSHA inspections: 3 · Violations cited: 7IRONFORM, OSHA inspections: 3 · Violations cited: 8ADEPT CORPORATION, OSHA inspections: 3 · Violations cited: 6RUBBER DEVELOPMENT I…, OSHA inspections: 3 · Violations cited: 36O. C. KECKLEY COMPANY, OSHA inspections: 3 · Violations cited: 25GEMINI GROUP, INC., OSHA inspections: 3 · Violations cited: 7BLOOMFIELD BAKERS DB…, OSHA inspections: 3 · Violations cited: 4ACTAGRO, LLC, OSHA inspections: 3 · Violations cited: 10UNIFIED CML LLC, OSHA inspections: 3 · Violations cited: 12SHAKESPEARE COMPOSIT…, OSHA inspections: 3 · Violations cited: 18FLEXCO CORPORATION, OSHA inspections: 3 · Violations cited: 5ARA FOOD CORPORATION, OSHA inspections: 3 · Violations cited: 16NTH Degree Technolog…, OSHA inspections: 3 · Violations cited: 7
NTH Degree Technologies Worldwide INC. has 3 OSHA inspections on record and 7 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

NTH Degree Technologies Worldwide INC. in the Manufacturing enforcement ledger

Manufacturing sector: NTH Degree Technologies Worldwide INC. is the #30,359 heaviest OSHA penalty carrier of 35,243 employers with nonzero fines ($1,750).

How NTH Degree Technologies Worldwide INC. Compares

NTH Degree Technologies Worldwide INC.'s 2.33 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs well below peers (0.11x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

3

First Inspection

2011-05-27

Last Inspection

2012-04-16

Inspection Span

1 yr

Violations / Inspection

2.3

Avg Penalty / Inspection

$583

Industry Avg / Inspection

$6,093

What this shows 3 inspections over 1 year, averaging 2.3 violations per visit. That's $583 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

1

Serious

14.3% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

6

Other-Than-Serious

85.7% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$1,750

Current Penalty Amount

$1,750

Penalty Reduction

None

What this shows No reduction on record. The current penalty matches the original OSHA assessment.

Industry Safety Context: Manufacturing

How NTH Degree Technologies Worldwide INC. compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric NTH Degree Technologies Worldwide INC. Industry Avg
Inspections 3 2.6
Violations 7 8.0
Total Penalty $1,750 $15,763
Avg Penalty per Inspection $583 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for NTH Degree Technologies Worldwide INC., both outside AZ so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($1,750 here).

Sapa Industrial Extrusions INC $1,750 UT Overly Door Company $1,750 PA Tennessee Farmers Cooperative $1,750 TN Superior Extrusion $1,750 MI

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (3 inspections here).

Art Stone-Granite & Marble, INC. 3 insp. Marietta, GA Marietta Corporation 3 insp. Cortland, NY Inland Empire Truss, INC. 3 insp. Perris, CA Insinger Machine Company 3 insp. Philadelphia, PA

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Overly Door Company
Greensburg, PA
4 inspections $1,750
Sapa Industrial Extrusions INC
Spanish Fork, UT
2 inspections $1,750
Superior Extrusion
Gwinn, MI
2 inspections $1,750
Douglas Industries, INC.
Eldridge, IA
2 inspections $1,750
Ford Motor CO Woodhaven Stamping
Woodhaven, MI
3 inspections $1,750

Compare NTH Degree Technologies Worldwide INC. vs Overly Door Company side-by-side →

What to do with this record

Use NTH Degree Technologies Worldwide INC.'s enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare NTH Degree Technologies Worldwide INC. against Overly Door Company, a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether NTH Degree Technologies Worldwide INC.'s inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is NTH Degree Technologies Worldwide INC. safe to work at? ▼
Based on OSHA records, NTH Degree Technologies Worldwide INC.'s workplace safety record is mixed, with some compliance concerns. The employer has 7 violations across 3 inspections, including 1 serious violations. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does NTH Degree Technologies Worldwide INC. have? ▼
NTH Degree Technologies Worldwide INC. has 7 OSHA violations on record, including 1 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $1,750.
How many OSHA inspections has NTH Degree Technologies Worldwide INC. had? ▼
NTH Degree Technologies Worldwide INC. has had 3 OSHA inspections, with the first recorded on 2011-05-27 and the most recent on 2012-04-16. This averages 2.3 violations per inspection.
What is the total penalty amount for NTH Degree Technologies Worldwide INC.? ▼
NTH Degree Technologies Worldwide INC. has been assessed $1,750 in current OSHA penalties.
Does NTH Degree Technologies Worldwide INC. have any serious or willful violations? ▼
Yes. NTH Degree Technologies Worldwide INC. has 1 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does NTH Degree Technologies Worldwide INC. operate in? ▼
NTH Degree Technologies Worldwide INC. operates in the Manufacturing sector (NAICS code 325611). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does NTH Degree Technologies Worldwide INC. rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, NTH Degree Technologies Worldwide INC. ranks #78,998 (the lower half of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does NTH Degree Technologies Worldwide INC.'s safety record compare to industry average? ▼
NTH Degree Technologies Worldwide INC.'s total OSHA penalty of $1,750 is below the Manufacturing industry average of $15,763 per employer. The employer has 3 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Sapa Industrial Extrusions INC in Spanish Fork, UT is a similar manufacturing employer with $1,750 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 3 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.