PlainWorker
Employers › UT

Wholesale Trade · Springville, UT

Nozzle Tech USA LLC

According to OSHA enforcement records (2010–2026), Nozzle Tech USA LLC ranks #74,431 of 99,447 penalized U.S. employers by total current penalty, with a mixed safety record: 8 violations across 3 inspections.

Lower half by penalty100% serious
$2,250
OSHA penalties
8
Violations cited
3
OSHA inspections
#74,431
of 99,447 penalized employers

Nozzle Tech USA LLC in Springville, UT has been the subject of 3 OSHA workplace inspections and 8 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $2,250. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Nozzle Tech USA LLC 3 times over 4 years, roughly once every couple of years. These inspections resulted in 8 violations, averaging 2.7 per inspection, above what's typical for a single visit. According to OSHA enforcement records, its total current penalty ranks #74,431 of 99,447 penalized U.S. employers (the lower half of penalized employers nationally). Of these, 8 were classified as serious - indicating hazards that could cause death or serious harm. Against the Wholesale Trade industry average of 2 inspections per employer, this runs moderately above peers (1.5x the sector average) on inspection frequency. For comparison, Elenbaas Steel Supply LLC in Greenville, MI is another wholesale trade employer with 3 OSHA inspections on record and $2,250 in current penalties.

2.7
violations per inspection
100.0%
of violations were serious
#74,431
of 99,447 penalized employers

Compliance score

D 51/100
  • D OSHA safety compliance: 8 violations across 3 OSHA inspections (2.7 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How Nozzle Tech USA LLC compares on OSHA penalties

Total current penalty vs the Wholesale Trade per-employer average

in penalties

What this shows Nozzle Tech USA LLC runs well below peers (0.25x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$2,250 Top 25% most affordable more affordable than 75% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). This entry sits in this band. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Above this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Above this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Wholesale Trade employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Nozzle Tech USA LLC.

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both3.03.033.03.007.114.221.328.4OSHA inspectionsViolations citedEMCO CHEMICAL DISTRI…, OSHA inspections: 3 · Violations cited: 3GRAINCO FS, INC., OSHA inspections: 3 · Violations cited: 4APPERTAIN CORP, OSHA inspections: 3 · Violations cited: 14OLIVE HILL HARDWOODS…, OSHA inspections: 3 · Violations cited: 27THE CYPHER COMPANY, OSHA inspections: 3 · Violations cited: 7SUBURBAN PROPANE, L.P., OSHA inspections: 3 · Violations cited: 10ELECTRO MATIC PRODUC…, OSHA inspections: 3 · Violations cited: 2THE KROGER COMPANY, OSHA inspections: 3 · Violations cited: 3FARMERS ELEVATOR COM…, OSHA inspections: 3 · Violations cited: 0ADVANCED RECYCLING C…, OSHA inspections: 3 · Violations cited: 3GROWERS CITRUS PACKI…, OSHA inspections: 3 · Violations cited: 7COLORADO PREMIUM FOODS, OSHA inspections: 3 · Violations cited: 1SPECIAL METALS, INCO…, OSHA inspections: 3 · Violations cited: 5REBUILDERS AUTOMOTIV…, OSHA inspections: 3 · Violations cited: 18STAIMAN RECYCLING CO…, OSHA inspections: 3 · Violations cited: 3FRONTIER AG INC, OSHA inspections: 3 · Violations cited: 5INDUSTRIAL RESIN REC…, OSHA inspections: 3 · Violations cited: 21COMMODITIES PLUS INC, OSHA inspections: 3 · Violations cited: 18DIAMOND FRUIT GROWER…, OSHA inspections: 3 · Violations cited: 2NAPPI DISTRIBUTORS, OSHA inspections: 3 · Violations cited: 2Nozzle Tech USA LLC, OSHA inspections: 3 · Violations cited: 8
Nozzle Tech USA LLC has 3 OSHA inspections on record and 8 violations cited. The crosshair marks the median among these Wholesale Trade peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Nozzle Tech USA LLC in the Wholesale Trade enforcement ledger

In Wholesale Trade, Nozzle Tech USA LLC sits at penalty rank #3,506 of 4,429 penalized establishments ($2,250 assessed).

How Nozzle Tech USA LLC Compares

Nozzle Tech USA LLC's 2.67 violations per inspection compares to the Wholesale Trade sector average of 5.5 violations per employer.

Against the Wholesale Trade industry average of $9,112 per employer, this employer's current OSHA penalty runs well below peers (0.25x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

3

First Inspection

2014-02-18

Last Inspection

2018-05-01

Inspection Span

4 yrs

Violations / Inspection

2.7

Avg Penalty / Inspection

$750

Industry Avg / Inspection

$4,665

What this shows 3 inspections over 4 years, averaging 2.7 violations per visit. That's $750 per inspection vs. the Wholesale Trade average of $4,665.

Enforcement detail

Violation Breakdown

8

Serious

100.0% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

0

Other-Than-Serious

0.0% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$4,500

Current Penalty Amount

$2,250

Penalty Reduction

50.0%

What this shows Penalties were reduced by $2,250 from the initial assessment of $4,500. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Wholesale Trade

How Nozzle Tech USA LLC compares to the Wholesale Trade sector, which has 6,881 employers tracked by PlainWorker.

Metric Nozzle Tech USA LLC Industry Avg
Inspections 3 2.0
Violations 8 5.5
Total Penalty $2,250 $9,112
Avg Penalty per Inspection $750 $4,665
View all 6,881 employers in Wholesale Trade →

Nationwide Wholesale Trade peers with similar penalties or inspection counts

Two OSHA-record peer sets for Nozzle Tech USA LLC, both outside UT so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($2,250 here).

Coca Cola Refreshments $2,250 NY Belton Metal Company INC $2,250 SC Silver Foam Distributing CO $2,250 MI Elenbaas Steel Supply LLC $2,250 MI

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (3 inspections here).

Emco Chemical Distributors, INC. 3 insp. North Chicago, IL Grainco FS, INC. 3 insp. Mazon, IL Appertain CORP 3 insp. Pulaski, TN Olive Hill Hardwoods, INC. 3 insp. Olivehill, TN

Nearby & Similar Employers in Wholesale Trade

Showing 5 of 6880 other employers tracked in this sector.

Coca Cola Refreshments
Syracuse, NY
2 inspections $2,250
Belton Metal Company INC
Belton, SC
3 inspections $2,250
Silver Foam Distributing CO
Jackson, MI
2 inspections $2,250
Elenbaas Steel Supply LLC
Greenville, MI
3 inspections $2,250
Beachner Grain, INC.
Fredonia, KS
2 inspections $2,250

Compare Nozzle Tech USA LLC vs Coca Cola Refreshments side-by-side →

What to do with this record

Use Nozzle Tech USA LLC's enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Nozzle Tech USA LLC against Coca Cola Refreshments, a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Nozzle Tech USA LLC's inspection and penalty record is typical for Wholesale Trade or an outlier against the sector's own average. View the Wholesale Trade sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Nozzle Tech USA LLC safe to work at? ▼
Based on OSHA records, Nozzle Tech USA LLC's workplace safety record is mixed, with some compliance concerns. The employer has 8 violations across 3 inspections, including 8 serious violations. Compared to Wholesale Trade industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does Nozzle Tech USA LLC have? ▼
Nozzle Tech USA LLC has 8 OSHA violations on record, including 8 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $2,250.
How many OSHA inspections has Nozzle Tech USA LLC had? ▼
Nozzle Tech USA LLC has had 3 OSHA inspections, with the first recorded on 2014-02-18 and the most recent on 2018-05-01. This averages 2.7 violations per inspection.
What is the total penalty amount for Nozzle Tech USA LLC? ▼
Nozzle Tech USA LLC has been assessed $2,250 in current OSHA penalties, reduced from an initial assessment of $4,500 (a 50.0% reduction).
Does Nozzle Tech USA LLC have any serious or willful violations? ▼
Yes. Nozzle Tech USA LLC has 8 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Nozzle Tech USA LLC operate in? ▼
Nozzle Tech USA LLC operates in the Wholesale Trade sector (NAICS code 423830). This industry has 6,881 employers tracked by PlainWorker, with 13,442 total OSHA inspections and $62.70M in cumulative penalties.
Where does Nozzle Tech USA LLC rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Nozzle Tech USA LLC ranks #74,431 (the lower half of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Nozzle Tech USA LLC's safety record compare to industry average? ▼
Nozzle Tech USA LLC's total OSHA penalty of $2,250 is below the Wholesale Trade industry average of $9,112 per employer. The employer has 3 inspections compared to the industry average of 2.0 per employer. For a direct comparison, Elenbaas Steel Supply LLC in Greenville, MI is a similar wholesale trade employer with $2,250 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 3 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.