PlainWorker
Employers › NV

Manufacturing · Las Vegas, NV

Nevada Precision Sheet Metal, INC.

According to OSHA enforcement records (2010–2026), Nevada Precision Sheet Metal, INC. ranks #5,537 of 99,447 penalized U.S. employers by total current penalty, with a concerning safety record: 13 violations across 3 inspections.

Top 10% by penalty54% serious
$47,416
OSHA penalties
13
Violations cited
3
OSHA inspections
#5,537
of 99,447 penalized employers

Nevada Precision Sheet Metal, INC. in Las Vegas, NV has been the subject of 3 OSHA workplace inspections and 13 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $47,416. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Nevada Precision Sheet Metal, INC. 3 times over 4 years, roughly once every couple of years. These inspections resulted in 13 violations, averaging 4.3 per inspection, above what's typical for a single visit. According to OSHA enforcement records, its total current penalty ranks #5,537 of 99,447 penalized U.S. employers (the top 10% of penalized employers nationally). Of these, 7 were classified as serious and 1 as willful - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this sits roughly in line with peers (1.2x the sector average) on inspection frequency. For comparison, Rich Products Corporation in Waycross, GA is another manufacturing employer with 2 OSHA inspections on record and $47,438 in current penalties.

4.3
violations per inspection
53.8%
of violations were serious
#5,537
of 99,447 penalized employers

Compliance score

F 27/100
  • F OSHA safety compliance: 13 violations across 3 OSHA inspections (4.3 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How this employer compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Nevada Precision Sheet Metal, INC. runs well above peers (3.0x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$47,416 Bottom 6% least affordable more affordable than 6% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Below this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Below this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Below this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Below this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Below this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Below this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Below this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Below this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). This entry sits in this band. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Nevada Precision Sheet Metal, INC..

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both3.03.033.03.00.514.027.541.054.5OSHA inspectionsViolations citedLABORATORY TOPS, INC., OSHA inspections: 3 · Violations cited: 52OILFIELD SOLUTIONS, …, OSHA inspections: 3 · Violations cited: 50LINCOLN BRASS WORKS …, OSHA inspections: 3 · Violations cited: 51CLEAR LAM PACKAGING,…, OSHA inspections: 3 · Violations cited: 14MINEBEA ACCESSSOLUTI…, OSHA inspections: 3 · Violations cited: 7COLORADO ROOFING PRO…, OSHA inspections: 3 · Violations cited: 19DEEREBUILT, LLC, OSHA inspections: 3 · Violations cited: 18AXLE OF DEARBORN INC, OSHA inspections: 3 · Violations cited: 40ACCUTECH FILMS, INC., OSHA inspections: 3 · Violations cited: 6WALKER FOODS INC, OSHA inspections: 3 · Violations cited: 19FUTURAMIK INDUSTRIES…, OSHA inspections: 3 · Violations cited: 23LAKE COUNTRY FABRICA…, OSHA inspections: 3 · Violations cited: 12MEDINA BLANKING INC., OSHA inspections: 3 · Violations cited: 10SYNTHETEX, LLC, OSHA inspections: 3 · Violations cited: 12FIRST SOLAR, INC., OSHA inspections: 3 · Violations cited: 3CDI CONTRACTORS, OSHA inspections: 3 · Violations cited: 6PENNSYLVANIA INSULAT…, OSHA inspections: 3 · Violations cited: 14SCALED COMPOSITES, LLC, OSHA inspections: 3 · Violations cited: 5IMPORT EXPORT TIRE C…, OSHA inspections: 3 · Violations cited: 18DIVERSIFIED MACHINE …, OSHA inspections: 3 · Violations cited: 10Nevada Precision She…, OSHA inspections: 3 · Violations cited: 13
Nevada Precision Sheet Metal, INC. has 3 OSHA inspections on record and 13 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Nevada Precision Sheet Metal, INC. in the Manufacturing enforcement ledger

In Manufacturing, Nevada Precision Sheet Metal, INC. sits at penalty rank #2,818 of 35,243 penalized establishments ($47,416 assessed).

How Nevada Precision Sheet Metal, INC. Compares

Nevada Precision Sheet Metal, INC.'s 4.33 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs well above peers (3.0x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

3

First Inspection

2014-01-31

Last Inspection

2018-05-29

Inspection Span

4 yrs

Violations / Inspection

4.3

Avg Penalty / Inspection

$15,805

Industry Avg / Inspection

$6,093

What this shows 3 inspections over 4 years, averaging 4.3 violations per visit. That's $15,805 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

7

Serious

53.8% of total

1

Willful

7.7% of total

0

Repeat

0.0% of total

5

Other-Than-Serious

38.5% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$77,735

Current Penalty Amount

$47,416

Penalty Reduction

39.0%

What this shows Penalties were reduced by $30,319 from the initial assessment of $77,735. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Nevada Precision Sheet Metal, INC. compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Nevada Precision Sheet Metal, INC. Industry Avg
Inspections 3 2.6
Violations 13 8.0
Total Penalty $47,416 $15,763
Avg Penalty per Inspection $15,805 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Nevada Precision Sheet Metal, INC., both outside NV so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($47,416 here).

Wyoming Sugar Company, LLC $47,432 WY Kommerling USA, INC. $47,433 AL Rich Products Corporation $47,438 GA Homesteader, LLC $47,440 TN

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (3 inspections here).

Laboratory Tops, INC. 3 insp. Taylor, TX Oilfield Solutions, INC. 3 insp. Midland, TX Lincoln Brass Works INC 3 insp. Waynesboro, TN Clear Lam Packaging, INC. 3 insp. Elk Grove Village, IL

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Wyoming Sugar Company, LLC
Worland, WY
4 inspections $47,432
Kommerling USA, INC.
Huntsville, AL
9 inspections $47,433
Rich Products Corporation
Waycross, GA
2 inspections $47,438
KG Marketing and Bag CO., INC.
Waukesha, WI
5 inspections $47,442
Irwin Steel, LLC
Justin, TX
4 inspections $47,389

Compare Nevada Precision Sheet Metal, INC. vs Wyoming Sugar Company, LLC side-by-side →

What to do with this record

Use Nevada Precision Sheet Metal, INC.'s enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Nevada Precision Sheet Metal, INC. against Wyoming Sugar Company, LLC, a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Nevada Precision Sheet Metal, INC.'s inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Nevada Precision Sheet Metal, INC. safe to work at? ▼
Based on OSHA records, Nevada Precision Sheet Metal, INC.'s workplace safety record is concerning, with multiple serious compliance issues. The employer has 13 violations across 3 inspections, including 7 serious violations. Compared to Manufacturing industry peers, this is above average for penalties. Review the full inspection history below for details.
How many OSHA violations does Nevada Precision Sheet Metal, INC. have? ▼
Nevada Precision Sheet Metal, INC. has 13 OSHA violations on record, including 7 serious, 1 willful, and 0 repeat violations. The total current penalty amount is $47,416.
How many OSHA inspections has Nevada Precision Sheet Metal, INC. had? ▼
Nevada Precision Sheet Metal, INC. has had 3 OSHA inspections, with the first recorded on 2014-01-31 and the most recent on 2018-05-29. This averages 4.3 violations per inspection.
What is the total penalty amount for Nevada Precision Sheet Metal, INC.? ▼
Nevada Precision Sheet Metal, INC. has been assessed $47,416 in current OSHA penalties, reduced from an initial assessment of $77,735 (a 39.0% reduction).
Does Nevada Precision Sheet Metal, INC. have any serious or willful violations? ▼
Yes. Nevada Precision Sheet Metal, INC. has 7 serious violations, 1 willful violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Nevada Precision Sheet Metal, INC. operate in? ▼
Nevada Precision Sheet Metal, INC. operates in the Manufacturing sector (NAICS code 332322). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Nevada Precision Sheet Metal, INC. rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Nevada Precision Sheet Metal, INC. ranks #5,537 (the top 10% of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Nevada Precision Sheet Metal, INC.'s safety record compare to industry average? ▼
Nevada Precision Sheet Metal, INC.'s total OSHA penalty of $47,416 is above the Manufacturing industry average of $15,763 per employer (3.0x the average). The employer has 3 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Rich Products Corporation in Waycross, GA is a similar manufacturing employer with $47,438 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 3 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.