PlainWorker
Employers › AK

Wholesale Trade · Anchorage, AK

NC Machinery CO

According to OSHA enforcement records (2010–2026), NC Machinery CO has a concerning safety record: 28 violations across 3 inspections. See the full breakdown below.

Top 5% by penalty61% serious
$80,875
OSHA penalties
28
Violations cited
3
OSHA inspections
#2,447
of 100,495 penalized employers

NC Machinery CO in Anchorage, AK has been the subject of 3 OSHA workplace inspections and 28 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $80,875. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected NC Machinery CO 3 times over 1 year - more than twice a year on average. These inspections resulted in 28 violations, averaging 9.3 per inspection - a notably high rate. Its total OSHA penalty ranks in the top 5% of penalized employers nationally. Of these, 17 were classified as serious - indicating hazards that could cause death or serious harm. Against the Wholesale Trade industry average of 2 inspections per employer, this runs moderately above peers (1.6x the sector average) on inspection frequency. For comparison, New Shun Feng Trading Inc in Woodside, NY is another wholesale trade employer with 0 OSHA inspections on record and $0 in current penalties.

9.3
violations per inspection
60.7%
of violations were serious
98%
of penalized employers rank lower

How NC Machinery CO compares on OSHA penalties

Total current penalty vs the Wholesale Trade per-employer average

in penalties

What this shows NC Machinery CO runs far above peers (9.0x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$80,875 Bottom 2% least affordable more affordable than 2% of 100,495 U.S. employers with a penalty

$0–$5,000: 44,435 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,628 U.S. employers with a penalty (21%). Below this entry. $10,000–$15,000: 11,165 U.S. employers with a penalty (11%). Below this entry. $15,000–$20,000: 6,629 U.S. employers with a penalty (7%). Below this entry. $20,000–$25,000: 4,205 U.S. employers with a penalty (4%). Below this entry. $25,000–$30,000: 2,885 U.S. employers with a penalty (3%). Below this entry. $30,000–$35,000: 2,052 U.S. employers with a penalty (2%). Below this entry. $35,000–$40,000: 1,483 U.S. employers with a penalty (1%). Below this entry. $40,000–$45,000: 1,120 U.S. employers with a penalty (1%). Below this entry. $45,000–$50,000: 792 U.S. employers with a penalty (1%). Below this entry. $50,000+: 5,101 U.S. employers with a penalty (5%). This entry ($80,875) is well above this band, the chart's rightmost open-ended bucket. This employer: $80,875 $0 $55,000+ every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

What the Data Says About NC Machinery CO

The federal enforcement record for NC Machinery CO in Anchorage, AK includes 3 OSHA inspections and 28 violations, translating to 9.33 violations per inspection. Of those violations, 17 (60.7%) were classified as serious, 0 (0.0%) as willful, and 2 (7.1%) as repeat. Serious violations denote hazards likely to cause death or serious physical harm; willful and repeat categories indicate intentional disregard or recurrence of previously cited hazards.

OSHA assessed $130,197 in initial penalties against this employer, later adjusted to a current total of $80,875 - a 37.9% reduction. Average penalty per inspection works out to $26,958. Against the Wholesale Trade industry average of $9,023 per employer, this record runs far above peers (9.0x the sector average).

Inspection activity spans from 2017-10-26 to 2019-04-02, a window of roughly 1 year.

Enforcement detail

OSHA Inspection History

Total Inspections

3

First Inspection

2017-10-26

Last Inspection

2019-04-02

Inspection Span

1 yr

Violations / Inspection

9.3

Avg Penalty / Inspection

$26,958

Industry Avg / Inspection

$4,678

What this shows 3 inspections over 1 year, averaging 9.3 violations per visit. That's $26,958 per inspection vs. the Wholesale Trade average of $4,678.

Enforcement detail

Violation Breakdown

17

Serious

60.7% of total

0

Willful

0.0% of total

2

Repeat

7.1% of total

9

Other-Than-Serious

32.1% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$130,197

Current Penalty Amount

$80,875

Penalty Reduction

37.9%

What this shows Penalties were reduced by $49,322 from the initial assessment of $130,197. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Wholesale Trade

How NC Machinery CO compares to the Wholesale Trade sector, which has 6,960 employers tracked by PlainWorker.

Metric NC Machinery CO Industry Avg
Inspections 3 1.9
Violations 28 5.4
Total Penalty $80,875 $9,023
Avg Penalty per Inspection $26,958 $4,678
View all 6,960 employers in Wholesale Trade →

Nearby & Similar Employers in Wholesale Trade

Chuckanut Products, Inc.
Salem, OR
0 inspections $0
Affiliated Foods INC.
Amarillo, TX
5 inspections $80,395
StayBright Electric of Colorado, Inc.
Colorado Springs, CO
0 inspections $0
F.W. Webb (Manchester NH #54)
Manchester, NH
0 inspections $0
New Shun Feng Trading Inc
Woodside, NY
0 inspections $0

Compare NC Machinery CO vs Chuckanut Products, Inc. side-by-side →

Frequently Asked Questions

Is NC Machinery CO safe to work at? ▼
Based on OSHA records, NC Machinery CO's workplace safety record is concerning, with multiple serious compliance issues. The employer has 28 violations across 3 inspections, including 17 serious violations. Compared to Wholesale Trade industry peers, this is above average for penalties. Review the full inspection history below for details.
How many OSHA violations does NC Machinery CO have? ▼
NC Machinery CO has 28 OSHA violations on record, including 17 serious, 0 willful, and 2 repeat violations. The total current penalty amount is $80,875.
How many OSHA inspections has NC Machinery CO had? ▼
NC Machinery CO has had 3 OSHA inspections, with the first recorded on 2017-10-26 and the most recent on 2019-04-02. This averages 9.3 violations per inspection.
What is the total penalty amount for NC Machinery CO? ▼
NC Machinery CO has been assessed $80,875 in current OSHA penalties, reduced from an initial assessment of $130,197 (a 37.9% reduction).
Does NC Machinery CO have any serious or willful violations? ▼
Yes. NC Machinery CO has 17 serious violations, and 2 repeat violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does NC Machinery CO operate in? ▼
NC Machinery CO operates in the Wholesale Trade sector (NAICS code 423810). This industry has 6,960 employers tracked by PlainWorker, with 13,424 total OSHA inspections and $62.80M in cumulative penalties.
How does NC Machinery CO's safety record compare to industry average? ▼
NC Machinery CO's total OSHA penalty of $80,875 is above the Wholesale Trade industry average of $9,023 per employer (9.0x the average). The employer has 3 inspections compared to the industry average of 1.9 per employer. For a direct comparison, New Shun Feng Trading Inc in Woodside, NY is a similar wholesale trade employer with $0 in current penalties.

Explore PlainWorker

Wholesale Trade Industry

All 6,960 employers in this sector
Employers in AK

All inspected employers in this state
Safety Rankings

Most penalized, repeat violators & more

What to check next

NC Machinery CO's record is one establishment in a larger pattern. Use it as a research checklist, not a verdict on the employer overall.

These figures are the federal enforcement record on file and reflect past inspections, not a statement about current workplace conditions. See the disclaimer for how to read them.

Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 3 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.