PlainWorker
Employers › CT

Manufacturing · Clinton, CT

National Sintered Alloys Incorporated

According to OSHA enforcement records (2010–2026), National Sintered Alloys Incorporated ranks #4,256 of 99,447 penalized U.S. employers by total current penalty, with a concerning safety record: 14 violations across 3 inspections.

Top 5% by penalty43% serious
$56,800
OSHA penalties
14
Violations cited
3
OSHA inspections
#4,256
of 99,447 penalized employers

National Sintered Alloys Incorporated in Clinton, CT has been the subject of 3 OSHA workplace inspections and 14 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $56,800. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected National Sintered Alloys Incorporated 3 times over 2 years, roughly annually. These inspections resulted in 14 violations, averaging 4.7 per inspection, above what's typical for a single visit. According to OSHA enforcement records, its total current penalty ranks #4,256 of 99,447 penalized U.S. employers (the top 5% of penalized employers nationally). Of these, 6 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this sits roughly in line with peers (1.2x the sector average) on inspection frequency. For comparison, Mennel Milling Company in Fostoria, OH is another manufacturing employer with 3 OSHA inspections on record and $56,764 in current penalties.

4.7
violations per inspection
42.9%
of violations were serious
#4,256
of 99,447 penalized employers

Compliance score

F 22/100
  • F OSHA safety compliance: 14 violations across 3 OSHA inspections (4.7 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How this employer compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows National Sintered Alloys Incorporated runs well above peers (3.6x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$56,800 Bottom 4% least affordable more affordable than 4% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Below this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Below this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Below this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Below this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Below this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Below this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Below this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Below this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Below this entry. $50,000+: 5,150 U.S. employers with a penalty (5%). This entry ($56,800) is well above this band, the chart's rightmost open-ended bucket. This employer: $56,800 $0 $55,000+ every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is National Sintered Alloys Incorporated.

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both3.03.033.03.00.110.52131.441.9OSHA inspectionsViolations citedDAKOTA BODIES, LLC, OSHA inspections: 3 · Violations cited: 30LE PAFE, INC., OSHA inspections: 3 · Violations cited: 17TFP CORPORATION, OSHA inspections: 3 · Violations cited: 28EQUISTAR CHEMICALS, LP, OSHA inspections: 3 · Violations cited: 6BIZON GROUP INC., OSHA inspections: 3 · Violations cited: 25UNITED WINDOW & DOOR…, OSHA inspections: 3 · Violations cited: 12SOUTHERN MINNESOTA B…, OSHA inspections: 3 · Violations cited: 13KARAVAN TRAILERS, INC., OSHA inspections: 3 · Violations cited: 7J.B. STAMPING INC., OSHA inspections: 3 · Violations cited: 29EXPERA SPECIALTY SOL…, OSHA inspections: 3 · Violations cited: 9EVERSON TESLA, INC., OSHA inspections: 3 · Violations cited: 28AMERICAN BUILDING SU…, OSHA inspections: 3 · Violations cited: 33SOUTHERN STATES COOP…, OSHA inspections: 3 · Violations cited: 12NEWMAN TECHNOLOGY SO…, OSHA inspections: 3 · Violations cited: 40AMERICAN ACRYLIC & I…, OSHA inspections: 3 · Violations cited: 11JIM C. HAMER COMPANY, OSHA inspections: 3 · Violations cited: 2EATON CORPORATION, OSHA inspections: 3 · Violations cited: 9COINCO, INC., OSHA inspections: 3 · Violations cited: 15GUNBOAT INTERNATIONA…, OSHA inspections: 3 · Violations cited: 13PANEL BUILT, INC., OSHA inspections: 3 · Violations cited: 19National Sintered Al…, OSHA inspections: 3 · Violations cited: 14
National Sintered Alloys Incorporated has 3 OSHA inspections on record and 14 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

National Sintered Alloys Incorporated in the Manufacturing enforcement ledger

Among 35,243 Manufacturing employers with OSHA penalties on file, National Sintered Alloys Incorporated ranks #2,166 at $56,800 current penalty.

How National Sintered Alloys Incorporated Compares

National Sintered Alloys Incorporated's 4.67 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs well above peers (3.6x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

3

First Inspection

2015-04-10

Last Inspection

2017-01-27

Inspection Span

2 yrs

Violations / Inspection

4.7

Avg Penalty / Inspection

$18,933

Industry Avg / Inspection

$6,093

What this shows 3 inspections over 2 years, averaging 4.7 violations per visit. That's $18,933 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

6

Serious

42.9% of total

0

Willful

0.0% of total

7

Repeat

50.0% of total

1

Other-Than-Serious

7.1% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$75,702

Current Penalty Amount

$56,800

Penalty Reduction

25.0%

What this shows Penalties were reduced by $18,902 from the initial assessment of $75,702. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How National Sintered Alloys Incorporated compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric National Sintered Alloys Incorporated Industry Avg
Inspections 3 2.6
Violations 14 8.0
Total Penalty $56,800 $15,763
Avg Penalty per Inspection $18,933 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for National Sintered Alloys Incorporated, both outside CT so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($56,800 here).

Deflecto, LLC $56,829 OH Plastic Systems, LLC $56,835 OH Mennel Milling Company $56,764 OH Premier Pacific Seafoods, INC. $56,760 AK

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (3 inspections here).

Dakota Bodies, LLC 3 insp. Watertown, SD Le Pafe, INC. 3 insp. Montebello, CA TFP Corporation 3 insp. Medina, OH Equistar Chemicals, LP 3 insp. Tuscola, IL

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Phoenix Iron Worx/Access Control technologies
Salisbury, NC
0 inspections $0
Deflecto, LLC
Dover, OH
5 inspections $56,829
Plastic Systems, LLC
Kenton, OH
3 inspections $56,835
Mennel Milling Company
Fostoria, OH
3 inspections $56,764
Premier Pacific Seafoods, INC.
Dutch Harbor, AK
4 inspections $56,760

Compare National Sintered Alloys Incorporated vs Phoenix Iron Worx/Access Control technologies side-by-side →

What to do with this record

Use National Sintered Alloys Incorporated's enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare National Sintered Alloys Incorporated against Phoenix Iron Worx/Access Control technologies, a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether National Sintered Alloys Incorporated's inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is National Sintered Alloys Incorporated safe to work at? ▼
Based on OSHA records, National Sintered Alloys Incorporated's workplace safety record is concerning, with multiple serious compliance issues. The employer has 14 violations across 3 inspections, including 6 serious violations. Compared to Manufacturing industry peers, this is above average for penalties. Review the full inspection history below for details.
How many OSHA violations does National Sintered Alloys Incorporated have? ▼
National Sintered Alloys Incorporated has 14 OSHA violations on record, including 6 serious, 0 willful, and 7 repeat violations. The total current penalty amount is $56,800.
How many OSHA inspections has National Sintered Alloys Incorporated had? ▼
National Sintered Alloys Incorporated has had 3 OSHA inspections, with the first recorded on 2015-04-10 and the most recent on 2017-01-27. This averages 4.7 violations per inspection.
What is the total penalty amount for National Sintered Alloys Incorporated? ▼
National Sintered Alloys Incorporated has been assessed $56,800 in current OSHA penalties, reduced from an initial assessment of $75,702 (a 25.0% reduction).
Does National Sintered Alloys Incorporated have any serious or willful violations? ▼
Yes. National Sintered Alloys Incorporated has 6 serious violations, and 7 repeat violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does National Sintered Alloys Incorporated operate in? ▼
National Sintered Alloys Incorporated operates in the Manufacturing sector (NAICS code 332999). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does National Sintered Alloys Incorporated rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, National Sintered Alloys Incorporated ranks #4,256 (the top 5% of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does National Sintered Alloys Incorporated's safety record compare to industry average? ▼
National Sintered Alloys Incorporated's total OSHA penalty of $56,800 is above the Manufacturing industry average of $15,763 per employer (3.6x the average). The employer has 3 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Mennel Milling Company in Fostoria, OH is a similar manufacturing employer with $56,764 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 3 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.