PlainWorker
Employers › HI

NARITO SHEETMETAL & MECHANICAL CORPORATION

94-208 PUPUOLE STREET BAY 103, WAIPAHU, HI 96797 · Manufacturing

NARITO SHEETMETAL & MECHANICAL CORPORATION in WAIPAHU, HI has been the subject of 3 OSHA workplace inspections and 8 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $6,495. Industry sector: Manufacturing. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

3
OSHA Inspections
8
Violations Cited
$6,495
OSHA Penalties

Safety Assessment

NARITO SHEETMETAL & MECHANICAL CORPORATION has been inspected 3 times by OSHA over 4 years. These inspections resulted in 8 violations, averaging 2.7 violations per inspection. Of these, 7 were classified as serious — indicating hazards that could cause death or serious harm. Compared to the Manufacturing industry average of 3 inspections per employer, NARITO SHEETMETAL & MECHANICAL CORPORATION has been inspected more frequently.

What the Data Says About NARITO SHEETMETAL & MECHANICAL CORPORATION

The federal enforcement record for NARITO SHEETMETAL & MECHANICAL CORPORATION in WAIPAHU, HI includes 3 OSHA inspections and 8 violations, translating to 2.67 violations per inspection. Of those violations, 7 (87.5%) were classified as serious, 0 (0.0%) as willful, and 0 (0.0%) as repeat. Serious violations denote hazards likely to cause death or serious physical harm; willful and repeat categories indicate intentional disregard or recurrence of previously cited hazards.

OSHA assessed $7,582 in initial penalties against this employer, later adjusted to a current total of $6,495 — a 14.3% reduction. Average penalty per inspection works out to $2,165. Against the Manufacturing industry average of $13,853 per employer, this record runs below peers.

Inspection activity spans from 2014-02-20 to 2018-03-22, a window of roughly 4 years. This record draws directly from the U.S. Department of Labor's public enforcement data at data.dol.gov. Penalty amounts reflect final adjudicated figures after any settlement, informal conference, or formal contest. Workers, journalists, and researchers can use these figures to compare this employer's compliance posture against industry peers and to identify workplaces with elevated safety risks or repeat non-compliance.

OSHA Inspection History

Total Inspections
3
First Inspection
2014-02-20
Last Inspection
2018-03-22
Inspection Span
4 years
Violations per Inspection
2.7
Avg Penalty per Inspection
$2,165
Industry Avg per Inspection
$5,418

Violation Breakdown

7
Serious
87.5% of total
0
Willful
0.0% of total
0
Repeat
0.0% of total
1
Other-Than-Serious
12.5% of total

Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Penalty Analysis

Initial Penalty Assessed
$7,582
Current Penalty Amount
$6,495
Penalty Reduction
14.3%

Penalties were reduced by $1,087 from the initial assessment of $7,582. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How NARITO SHEETMETAL & MECHANICAL CORPORATION compares to the Manufacturing sector, which has 23,042 employers tracked by PlainWorker.

Metric NARITO SHEETMETAL & MECHANICAL CORPORATION Industry Avg
Inspections 3 2.6
Violations 8 8.2
Total Penalty $6,495 $13,853
Avg Penalty per Inspection $2,165 $5,418
View all 23,042 employers in Manufacturing →

Related Data from Other Sources

$
Salary & Wage Data

See BLS salary data for Manufacturing occupations on WageDex — including median wages, employment levels, and wage trends.

WageDex — wagedex.com →
S
Employer Safety Grade

Look up NARITO SHEETMETAL & MECHANICAL CORPORATION's composite safety grade on PlainSafetyScore — aggregated from OSHA, injury rates, and industry benchmarks.

PlainSafetyScore — plainsafetyscore.com →
L
Labor Market Data

Explore BLS labor statistics for HI on PlainLabor — employment levels, unemployment rates, and workforce trends.

PlainLabor — plainlabor.com →
E
EEO-1 Workforce Diversity

Look up NARITO SHEETMETAL & MECHANICAL CORPORATION's workforce composition on PlainEmploy — EEO-1 data including job categories and demographic breakdowns from EEOC filings.

PlainEmploy — plainemploy.com →

Workplace Safety Guides

Understanding OSHA Inspections

What triggers an inspection and what to expect during the process
How to Read an OSHA Inspection Report

Decode violation types, penalty amounts, and compliance outcomes
Your Rights Under OSHA

Know your workplace safety rights and how to exercise them
Wage Theft Explained

Common forms of wage theft and how to recover unpaid wages
Most Dangerous Industries

Which industries face the highest rates of violations and penalties
Industries With Most OSHA Violations

Data-driven breakdown of violation leaders by sector

Nearby & Similar Employers in Manufacturing

DAEHAN SOLUTION NEVADA, LLC.
FERNLEY, NV
7 inspections $4.70M
JOON, LLC
CUSSETA, AL
8 inspections $2.55M
SUNFIELD, INC.
HEBRON, OH
8 inspections $2.51M
Byton North America
Santa Clara, CA
0 inspections $0
REPUBLIC STEEL
CANTON, OH
20 inspections $1.64M

Compare NARITO SHEETMETAL & MECHANICAL CORPORATION vs DAEHAN SOLUTION NEVADA, LLC. side-by-side →

Frequently Asked Questions

Is NARITO SHEETMETAL & MECHANICAL CORPORATION safe to work at? ▼
Based on OSHA records, NARITO SHEETMETAL & MECHANICAL CORPORATION's workplace safety record is mixed, with some compliance concerns. The employer has 8 violations across 3 inspections, including 7 serious violations. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does NARITO SHEETMETAL & MECHANICAL CORPORATION have? ▼
NARITO SHEETMETAL & MECHANICAL CORPORATION has 8 OSHA violations on record, including 7 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $6,495.
How many OSHA inspections has NARITO SHEETMETAL & MECHANICAL CORPORATION had? ▼
NARITO SHEETMETAL & MECHANICAL CORPORATION has had 3 OSHA inspections, with the first recorded on 2014-02-20 and the most recent on 2018-03-22. This averages 2.7 violations per inspection.
What is the total penalty amount for NARITO SHEETMETAL & MECHANICAL CORPORATION? ▼
NARITO SHEETMETAL & MECHANICAL CORPORATION has been assessed $6,495 in current OSHA penalties, reduced from an initial assessment of $7,582 (a 14.3% reduction).
Does NARITO SHEETMETAL & MECHANICAL CORPORATION have any serious or willful violations? ▼
Yes. NARITO SHEETMETAL & MECHANICAL CORPORATION has 7 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does NARITO SHEETMETAL & MECHANICAL CORPORATION operate in? ▼
NARITO SHEETMETAL & MECHANICAL CORPORATION operates in the Manufacturing sector (NAICS code 332322). This industry has 23,042 employers tracked by PlainWorker, with 58,916 total OSHA inspections and $319.21M in cumulative penalties.
What are my rights if I work at NARITO SHEETMETAL & MECHANICAL CORPORATION? ▼
Under the Occupational Safety and Health Act, employees at NARITO SHEETMETAL & MECHANICAL CORPORATION have the right to a safe workplace, the right to report hazards without retaliation, the right to request an OSHA inspection, and the right to access their own exposure and medical records. Workers can also refuse dangerous work if they believe they face imminent danger and their employer has failed to address the hazard.
How do I file an OSHA complaint against NARITO SHEETMETAL & MECHANICAL CORPORATION? ▼
You can file a complaint with OSHA online at osha.gov/workers/file-complaint, by calling 1-800-321-OSHA (6742), or by visiting your local OSHA area office. Complaints can be filed confidentially. OSHA is required to respond to all complaints and will prioritize those alleging imminent danger. You are protected from employer retaliation under Section 11(c) of the OSH Act.
How does NARITO SHEETMETAL & MECHANICAL CORPORATION's safety record compare to industry average? ▼
NARITO SHEETMETAL & MECHANICAL CORPORATION's total OSHA penalty of $6,495 is below the Manufacturing industry average of $13,853 per employer. The employer has 3 inspections compared to the industry average of 2.6 per employer.

Explore PlainWorker

Manufacturing Industry

All 23,042 employers in this sector
Employers in HI

All inspected employers in this state
Safety Rankings

Most penalized, repeat violators & more

Related Data Sources

Safety Grade on PlainSafetyScore → Salary Data on WageDex → Labor Market on PlainLabor → Workforce Data on PlainEmploy →

Data Sources & Methodology

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Read our methodology — how this data is sourced, computed, and verified.

Verify with BLS →