Manufacturing · Temperance, MI

MTS Seating

According to OSHA enforcement records (2010–2026), MTS Seating ranks #80,540 of 99,447 penalized U.S. employers by total current penalty, with a relatively clean safety record: 3 violations across 3 inspections.

Lower half by penalty67% serious
$1,575
OSHA penalties
3
Violations cited
3
OSHA inspections
#80,540
of 99,447 penalized employers

MTS Seating in Temperance, MI has been the subject of 3 OSHA workplace inspections and 3 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $1,575. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected MTS Seating 3 times over 2 years, roughly annually. These inspections resulted in 3 violations, averaging 1.0 per inspection. According to OSHA enforcement records, its total current penalty ranks #80,540 of 99,447 penalized U.S. employers (the lower half of penalized employers nationally). Of these, 2 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this sits roughly in line with peers (1.2x the sector average) on inspection frequency. For comparison, Computer Times Publishing, INC. in Honolulu, HI is another manufacturing employer with 2 OSHA inspections on record and $1,575 in current penalties.

1.0
violations per inspection
66.7%
of violations were serious
#80,540
of 99,447 penalized employers

Compliance score

C 75/100
  • C OSHA safety compliance: 3 violations across 3 OSHA inspections (1.0 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How MTS Seating compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows MTS Seating runs well below peers (0.10x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$1,575 Top 19% most affordable more affordable than 81% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). This entry sits in this band. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Above this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Above this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is MTS Seating.

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both3.03.033.03.00.912.724.536.348.1OSHA inspectionsViolations citedSNEED SHIPBUILDING, …, OSHA inspections: 3 · Violations cited: 46LIQUI-BOX CORP., OSHA inspections: 3 · Violations cited: 9GREAT OUTDOOR COTTAG…, OSHA inspections: 3 · Violations cited: 25INTEX MILLWORK SOLUT…, OSHA inspections: 3 · Violations cited: 6EQUUSTOCK OPCO LLC, OSHA inspections: 3 · Violations cited: 7DURO-CHROME INDUSTRI…, OSHA inspections: 3 · Violations cited: 24CLEANAIRE, INC., OSHA inspections: 3 · Violations cited: 15PRAIRIE FARMS DAIRY,…, OSHA inspections: 3 · Violations cited: 16HOMEYER PRECISION MA…, OSHA inspections: 3 · Violations cited: 22C.I.L. INC., OSHA inspections: 3 · Violations cited: 20BRIGGS & STRATTON CO…, OSHA inspections: 3 · Violations cited: 3KRIER FOODS, LLC., OSHA inspections: 3 · Violations cited: 5FREIGHTCAR AMERICA, …, OSHA inspections: 3 · Violations cited: 18NEW AGE INDUSTRIAL C…, OSHA inspections: 3 · Violations cited: 12AMERICAN REEL CORPOR…, OSHA inspections: 3 · Violations cited: 16BRUNNER INTERNATIONA…, OSHA inspections: 3 · Violations cited: 10MERCURY PLASTICS, IN…, OSHA inspections: 3 · Violations cited: 4EBY SAWMILL, LLC, OSHA inspections: 3 · Violations cited: 12ROCHESTER CUSTOM MIL…, OSHA inspections: 3 · Violations cited: 11AL-CORN CLEAN FUEL, OSHA inspections: 3 · Violations cited: 17MTS Seating, OSHA inspections: 3 · Violations cited: 3
MTS Seating has 3 OSHA inspections on record and 3 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

MTS Seating in the Manufacturing enforcement ledger

In Manufacturing, MTS Seating sits at penalty rank #30,839 of 35,243 penalized establishments ($1,575 assessed).

How MTS Seating Compares

MTS Seating's 1.00 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs well below peers (0.10x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

3

First Inspection

2012-06-05

Last Inspection

2014-04-11

Inspection Span

2 yrs

Violations / Inspection

1.0

Avg Penalty / Inspection

$525

Industry Avg / Inspection

$6,093

What this shows 3 inspections over 2 years, averaging 1.0 violations per visit. That's $525 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

2

Serious

66.7% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

1

Other-Than-Serious

33.3% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$3,150

Current Penalty Amount

$1,575

Penalty Reduction

50.0%

What this shows Penalties were reduced by $1,575 from the initial assessment of $3,150. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How MTS Seating compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric MTS Seating Industry Avg
Inspections 3 2.6
Violations 3 8.0
Total Penalty $1,575 $15,763
Avg Penalty per Inspection $525 $6,093

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for MTS Seating, both outside MI so the neighborhoods are not geographic containment.

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Compare MTS Seating vs Lakeside Moulding & Manufacturing CO, INC. side-by-side →

What to do with this record

Use MTS Seating's enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare MTS Seating against Lakeside Moulding & Manufacturing CO, INC., a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether MTS Seating's inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is MTS Seating safe to work at?
Based on OSHA records, MTS Seating's workplace safety record is relatively clean, with fewer violations than typical. The employer has 3 violations across 3 inspections, including 2 serious violations. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does MTS Seating have?
MTS Seating has 3 OSHA violations on record, including 2 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $1,575.
How many OSHA inspections has MTS Seating had?
MTS Seating has had 3 OSHA inspections, with the first recorded on 2012-06-05 and the most recent on 2014-04-11. This averages 1.0 violations per inspection.
What is the total penalty amount for MTS Seating?
MTS Seating has been assessed $1,575 in current OSHA penalties, reduced from an initial assessment of $3,150 (a 50.0% reduction).
Does MTS Seating have any serious or willful violations?
Yes. MTS Seating has 2 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does MTS Seating operate in?
MTS Seating operates in the Manufacturing sector (NAICS code 337214). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does MTS Seating rank nationally on OSHA penalties?
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, MTS Seating ranks #80,540 (the lower half of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does MTS Seating's safety record compare to industry average?
MTS Seating's total OSHA penalty of $1,575 is below the Manufacturing industry average of $15,763 per employer. The employer has 3 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Computer Times Publishing, INC. in Honolulu, HI is a similar manufacturing employer with $1,575 in current penalties.
Data Sources & Methodology

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 3 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.