PlainWorker
Employers › TN

Manufacturing · Athens, TN

Mills Products INC

According to OSHA enforcement records (2010–2026), Mills Products INC ranks #54,764 of 99,447 penalized U.S. employers by total current penalty, with a concerning safety record: 13 violations across 2 inspections.

Lower half by penalty38% serious
$5,050
OSHA penalties
13
Violations cited
2
OSHA inspections
#54,764
of 99,447 penalized employers

Mills Products INC in Athens, TN has been the subject of 2 OSHA workplace inspections and 13 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $5,050. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Mills Products INC 2 times over 1 year - more than twice a year on average. These inspections resulted in 13 violations, averaging 6.5 per inspection - a notably high rate. According to OSHA enforcement records, its total current penalty ranks #54,764 of 99,447 penalized U.S. employers (the lower half of penalized employers nationally). Of these, 5 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs moderately below peers (0.8x the sector average) on inspection frequency. For comparison, Corvac Composites, LLC in Kentwood, MI is another manufacturing employer with 2 OSHA inspections on record and $5,050 in current penalties.

6.5
violations per inspection
38.5%
of violations were serious
#54,764
of 99,447 penalized employers

Compliance score

F 0/100
  • F OSHA safety compliance: 13 violations across 2 OSHA inspections (6.5 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How Mills Products INC compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Mills Products INC runs moderately below peers (0.3x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$5,050 Top 45% most affordable more affordable than 55% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). This entry sits in this band. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Above this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Mills Products INC.

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both1.92.022.02.0010.220.430.740.9OSHA inspectionsViolations citedNEXTEEL SAHA, LLC, OSHA inspections: 2 · Violations cited: 27REMINGTON ARMS COMPA…, OSHA inspections: 2 · Violations cited: 39AGILEX FLAVORS & FRA…, OSHA inspections: 2 · Violations cited: 18REPUBLIC ENGINEERED …, OSHA inspections: 2 · Violations cited: 6NIKKISO CRYO, INC., OSHA inspections: 2 · Violations cited: 1ADVANCE PAPER BOX CO…, OSHA inspections: 2 · Violations cited: 6JUNIPER ELBOW CO., I…, OSHA inspections: 2 · Violations cited: 19MANOR TOOL AND MANUF…, OSHA inspections: 2 · Violations cited: 5MATT BREWING COMPANY…, OSHA inspections: 2 · Violations cited: 10DEBAUFRE BAKERIES INC, OSHA inspections: 2 · Violations cited: 23D. A. STEIN CULINARY…, OSHA inspections: 2 · Violations cited: 7MIL-SPEC PACKAGING O…, OSHA inspections: 2 · Violations cited: 11DIAMOND SPAS, INC., OSHA inspections: 2 · Violations cited: 12SOUTHWARK METAL MANU…, OSHA inspections: 2 · Violations cited: 4CHEMIPLASTICA, INC., OSHA inspections: 2 · Violations cited: 12J.H. ROUTH PACKING C…, OSHA inspections: 2 · Violations cited: 6PACTIV CORPORATION, OSHA inspections: 2 · Violations cited: 5TOOL SYSTEMS, INC., OSHA inspections: 2 · Violations cited: 22CENTURION INDUSTRIES…, OSHA inspections: 2 · Violations cited: 3MAC LTT STAINLESS DI…, OSHA inspections: 2 · Violations cited: 31Mills Products INC, OSHA inspections: 2 · Violations cited: 13
Mills Products INC has 2 OSHA inspections on record and 13 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Mills Products INC in the Manufacturing enforcement ledger

Manufacturing sector: Mills Products INC is the #22,906 heaviest OSHA penalty carrier of 35,243 employers with nonzero fines ($5,050).

How Mills Products INC Compares

Mills Products INC's 6.50 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs moderately below peers (0.3x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

2

First Inspection

2010-08-13

Last Inspection

2011-06-22

Inspection Span

1 yr

Violations / Inspection

6.5

Avg Penalty / Inspection

$2,525

Industry Avg / Inspection

$6,093

What this shows 2 inspections over 1 year, averaging 6.5 violations per visit. That's $2,525 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

5

Serious

38.5% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

8

Other-Than-Serious

61.5% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$8,650

Current Penalty Amount

$5,050

Penalty Reduction

41.6%

What this shows Penalties were reduced by $3,600 from the initial assessment of $8,650. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Mills Products INC compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Mills Products INC Industry Avg
Inspections 2 2.6
Violations 13 8.0
Total Penalty $5,050 $15,763
Avg Penalty per Inspection $2,525 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Mills Products INC, both outside TN so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($5,050 here).

Custom Form INC $5,050 MI Corvac Composites, LLC $5,050 MI Cross Technologies Group $5,050 MI Badger Tire & Wheel, INC. $5,050 WI

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (2 inspections here).

Nexteel Saha, LLC 2 insp. Crosby, TX Remington Arms Company, LLC 2 insp. Ilion, NY Agilex Flavors & Fragrances INC 2 insp. Rancho Santa Margarita, CA Republic Engineered Products 2 insp. Canton, OH

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Custom Form INC
Hazel Park, MI
2 inspections $5,050
Kawasaki Tennessee INC
Morristown, TN
6 inspections $5,050
Corvac Composites, LLC
Kentwood, MI
2 inspections $5,050
Cross Technologies Group
Westland, MI
3 inspections $5,050
Badger Tire & Wheel, INC.
Jackson, WI
2 inspections $5,050

Compare Mills Products INC vs Custom Form INC side-by-side →

What to do with this record

Use Mills Products INC's enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Mills Products INC against Custom Form INC, a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Mills Products INC's inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Mills Products INC safe to work at? ▼
Based on OSHA records, Mills Products INC's workplace safety record is concerning, with multiple serious compliance issues. The employer has 13 violations across 2 inspections, including 5 serious violations. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does Mills Products INC have? ▼
Mills Products INC has 13 OSHA violations on record, including 5 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $5,050.
How many OSHA inspections has Mills Products INC had? ▼
Mills Products INC has had 2 OSHA inspections, with the first recorded on 2010-08-13 and the most recent on 2011-06-22. This averages 6.5 violations per inspection.
What is the total penalty amount for Mills Products INC? ▼
Mills Products INC has been assessed $5,050 in current OSHA penalties, reduced from an initial assessment of $8,650 (a 41.6% reduction).
Does Mills Products INC have any serious or willful violations? ▼
Yes. Mills Products INC has 5 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Mills Products INC operate in? ▼
Mills Products INC operates in the Manufacturing sector (NAICS code 332116). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Mills Products INC rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Mills Products INC ranks #54,764 (the lower half of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Mills Products INC's safety record compare to industry average? ▼
Mills Products INC's total OSHA penalty of $5,050 is below the Manufacturing industry average of $15,763 per employer. The employer has 2 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Corvac Composites, LLC in Kentwood, MI is a similar manufacturing employer with $5,050 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 2 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.