Manufacturing · Milan, MI

Milan Metal Systems LLC

According to OSHA enforcement records (2010–2026), Milan Metal Systems LLC ranks #7,793 of 99,447 penalized U.S. employers by total current penalty, with a concerning safety record: 38 violations across 8 inspections.

Top 10% by penalty71% serious
$37,150
OSHA penalties
38
Violations cited
8
OSHA inspections
#7,793
of 99,447 penalized employers

Milan Metal Systems LLC in Milan, MI has been the subject of 8 OSHA workplace inspections and 38 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $37,150. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Milan Metal Systems LLC 8 times over 4 years - more than twice a year on average. These inspections resulted in 38 violations, averaging 4.8 per inspection, above what's typical for a single visit. According to OSHA enforcement records, its total current penalty ranks #7,793 of 99,447 penalized U.S. employers (the top 10% of penalized employers nationally). Of these, 27 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs well above peers (3.1x the sector average) on inspection frequency. For comparison, Fiamm Energy, LLC in Waynesboro, GA is another manufacturing employer with 5 OSHA inspections on record and $37,135 in current penalties.

4.8
violations per inspection
71.1%
of violations were serious
#7,793
of 99,447 penalized employers

Compliance score

F 21/100
  • F OSHA safety compliance: 38 violations across 8 OSHA inspections (4.8 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How Milan Metal Systems LLC compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Milan Metal Systems LLC runs well above peers (2.4x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$37,150 Bottom 8% least affordable more affordable than 8% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Below this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Below this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Below this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Below this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Below this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Below this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). This entry sits in this band. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Milan Metal Systems LLC.

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both8.08.088.08.10.818.235.552.870.2OSHA inspectionsViolations citedVALLEY FIG GROWERS, OSHA inspections: 8 · Violations cited: 19THE TAPCO TUBE COMPANY, OSHA inspections: 8 · Violations cited: 14DARIGOLD INC, OSHA inspections: 8 · Violations cited: 30AMERICAN ALUMINUM AC…, OSHA inspections: 8 · Violations cited: 14UNION ELECTRIC STEEL…, OSHA inspections: 8 · Violations cited: 41DEWAYNE'S QUALITY ME…, OSHA inspections: 8 · Violations cited: 32AMSTED RAIL, OSHA inspections: 8 · Violations cited: 28SEDA NORTH AMERICA I…, OSHA inspections: 8 · Violations cited: 7MULTNOMAH YACHT REPA…, OSHA inspections: 8 · Violations cited: 16RUSKEN PACKAGING INC, OSHA inspections: 8 · Violations cited: 67CREATIVE PACKAGING, …, OSHA inspections: 8 · Violations cited: 14SCAN-PAC MFG., INC., OSHA inspections: 8 · Violations cited: 17AJM PACKAGING CORPOR…, OSHA inspections: 8 · Violations cited: 13SUIZA DAIRY CORPORAT…, OSHA inspections: 8 · Violations cited: 9CAPSTONE NUTRITION, …, OSHA inspections: 8 · Violations cited: 4LOCKHEED MARTIN AERO…, OSHA inspections: 8 · Violations cited: 15CARRIS REELS OF CONN…, OSHA inspections: 8 · Violations cited: 6GRASSLAND DAIRY PROD…, OSHA inspections: 8 · Violations cited: 19JELD-WEN, INC. HAWKI…, OSHA inspections: 8 · Violations cited: 9NIBCO OF VIRGINIA, I…, OSHA inspections: 8 · Violations cited: 4Milan Metal Systems …, OSHA inspections: 8 · Violations cited: 38
Milan Metal Systems LLC has 8 OSHA inspections on record and 38 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Milan Metal Systems LLC in the Manufacturing enforcement ledger

In Manufacturing, Milan Metal Systems LLC sits at penalty rank #3,915 of 35,243 penalized establishments ($37,150 assessed).

How Milan Metal Systems LLC Compares

Milan Metal Systems LLC's 4.75 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs well above peers (2.4x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

8

First Inspection

2014-12-01

Last Inspection

2018-07-30

Inspection Span

4 yrs

Violations / Inspection

4.8

Avg Penalty / Inspection

$4,644

Industry Avg / Inspection

$6,093

What this shows 8 inspections over 4 years, averaging 4.8 violations per visit. That's $4,644 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

27

Serious

71.1% of total

0

Willful

0.0% of total

2

Repeat

5.3% of total

9

Other-Than-Serious

23.7% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$74,300

Current Penalty Amount

$37,150

Penalty Reduction

50.0%

What this shows Penalties were reduced by $37,150 from the initial assessment of $74,300. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Milan Metal Systems LLC compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Milan Metal Systems LLC Industry Avg
Inspections 8 2.6
Violations 38 8.0
Total Penalty $37,150 $15,763
Avg Penalty per Inspection $4,644 $6,093

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Milan Metal Systems LLC, both outside MI so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($37,150 here).

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (8 inspections here).

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Compare Milan Metal Systems LLC vs Solaris Paper INC side-by-side →

What to do with this record

Use Milan Metal Systems LLC's enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Milan Metal Systems LLC against Solaris Paper INC, a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Milan Metal Systems LLC's inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Milan Metal Systems LLC safe to work at?
Based on OSHA records, Milan Metal Systems LLC's workplace safety record is concerning, with multiple serious compliance issues. The employer has 38 violations across 8 inspections, including 27 serious violations. Compared to Manufacturing industry peers, this is above average for penalties. Review the full inspection history below for details.
How many OSHA violations does Milan Metal Systems LLC have?
Milan Metal Systems LLC has 38 OSHA violations on record, including 27 serious, 0 willful, and 2 repeat violations. The total current penalty amount is $37,150.
How many OSHA inspections has Milan Metal Systems LLC had?
Milan Metal Systems LLC has had 8 OSHA inspections, with the first recorded on 2014-12-01 and the most recent on 2018-07-30. This averages 4.8 violations per inspection.
What is the total penalty amount for Milan Metal Systems LLC?
Milan Metal Systems LLC has been assessed $37,150 in current OSHA penalties, reduced from an initial assessment of $74,300 (a 50.0% reduction).
Does Milan Metal Systems LLC have any serious or willful violations?
Yes. Milan Metal Systems LLC has 27 serious violations, and 2 repeat violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Milan Metal Systems LLC operate in?
Milan Metal Systems LLC operates in the Manufacturing sector (NAICS code 336370). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Milan Metal Systems LLC rank nationally on OSHA penalties?
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Milan Metal Systems LLC ranks #7,793 (the top 10% of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Milan Metal Systems LLC's safety record compare to industry average?
Milan Metal Systems LLC's total OSHA penalty of $37,150 is above the Manufacturing industry average of $15,763 per employer (2.4x the average). The employer has 8 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Fiamm Energy, LLC in Waynesboro, GA is a similar manufacturing employer with $37,135 in current penalties.
Data Sources & Methodology

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 8 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.