PlainWorker
Employers › TN

Manufacturing · Jackson, TN

Midsouth Machine & Welding LLC

According to OSHA enforcement records (2010–2026), Midsouth Machine & Welding LLC ranks #64,975 of 99,447 penalized U.S. employers by total current penalty, with a concerning safety record: 21 violations across 2 inspections.

Lower half by penalty57% serious
$3,500
OSHA penalties
21
Violations cited
2
OSHA inspections
#64,975
of 99,447 penalized employers

Midsouth Machine & Welding LLC in Jackson, TN has been the subject of 2 OSHA workplace inspections and 21 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $3,500. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Midsouth Machine & Welding LLC 2 times over 3 years, roughly once every couple of years. These inspections turned up 21 violations, averaging 10.5 per inspection - an extremely dense concentration of citations. According to OSHA enforcement records, its total current penalty ranks #64,975 of 99,447 penalized U.S. employers (the lower half of penalized employers nationally). Of these, 12 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs moderately below peers (0.8x the sector average) on inspection frequency. For comparison, DT Fowler Manufacturing Company INC in Lapeer, MI is another manufacturing employer with 2 OSHA inspections on record and $3,500 in current penalties.

10.5
violations per inspection
57.1%
of violations were serious
#64,975
of 99,447 penalized employers

Compliance score

F 0/100
  • F OSHA safety compliance: 21 violations across 2 OSHA inspections (10.5 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How Midsouth Machine & Welding LLC compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Midsouth Machine & Welding LLC runs well below peers (0.22x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$3,500 Top 35% most affordable more affordable than 65% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). This entry sits in this band. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Above this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Above this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Midsouth Machine & Welding LLC.

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both1.92.022.02.0012.124.136.248.2OSHA inspectionsViolations citedRED RIVER COMMODITIE…, OSHA inspections: 2 · Violations cited: 14TRINITY YACHTS, LLC, OSHA inspections: 2 · Violations cited: 23A.W.T. WORLD TRADE INC, OSHA inspections: 2 · Violations cited: 46DIMENSIONAL MACHINE …, OSHA inspections: 2 · Violations cited: 20WICO METAL PRODUCTS, OSHA inspections: 2 · Violations cited: 11TEXAS UNDERGROUND, I…, OSHA inspections: 2 · Violations cited: 22KOST USA LLC, OSHA inspections: 2 · Violations cited: 7DAY-LEE FOODS, INC., OSHA inspections: 2 · Violations cited: 5THE HARTY PRESS INC., OSHA inspections: 2 · Violations cited: 17BRITE BLAST LLC, OSHA inspections: 2 · Violations cited: 20IBC ENGINEERED MATER…, OSHA inspections: 2 · Violations cited: 20KDC ONE NORTHERN LABS, OSHA inspections: 2 · Violations cited: 6ISABELLE'S KITCHEN, …, OSHA inspections: 2 · Violations cited: 11METALICO ALUMINUM RE…, OSHA inspections: 2 · Violations cited: 37ASCEND PERFORMANCE M…, OSHA inspections: 2 · Violations cited: 2THE BUCKEYE STAMPING…, OSHA inspections: 2 · Violations cited: 9JOHN BLUDWORTH SHIPY…, OSHA inspections: 2 · Violations cited: 9HUNTER DOUGLAS ARCHI…, OSHA inspections: 2 · Violations cited: 11CONSOLIDATED PRECISI…, OSHA inspections: 2 · Violations cited: 3ACCENT DISPLAY CORPO…, OSHA inspections: 2 · Violations cited: 20Midsouth Machine & W…, OSHA inspections: 2 · Violations cited: 21
Midsouth Machine & Welding LLC has 2 OSHA inspections on record and 21 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Midsouth Machine & Welding LLC in the Manufacturing enforcement ledger

In Manufacturing, Midsouth Machine & Welding LLC sits at penalty rank #26,137 of 35,243 penalized establishments ($3,500 assessed).

How Midsouth Machine & Welding LLC Compares

Midsouth Machine & Welding LLC's 10.50 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs well below peers (0.22x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

2

First Inspection

2010-12-09

Last Inspection

2014-01-22

Inspection Span

3 yrs

Violations / Inspection

10.5

Avg Penalty / Inspection

$1,750

Industry Avg / Inspection

$6,093

What this shows 2 inspections over 3 years, averaging 10.5 violations per visit. That's $1,750 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

12

Serious

57.1% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

9

Other-Than-Serious

42.9% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$4,300

Current Penalty Amount

$3,500

Penalty Reduction

18.6%

What this shows Penalties were reduced by $800 from the initial assessment of $4,300. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Midsouth Machine & Welding LLC compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Midsouth Machine & Welding LLC Industry Avg
Inspections 2 2.6
Violations 21 8.0
Total Penalty $3,500 $15,763
Avg Penalty per Inspection $1,750 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Midsouth Machine & Welding LLC, both outside TN so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($3,500 here).

Stonewall Kitchen $3,500 ME Hart & Cooley, INC./Heat Fab $3,500 MA Unifrax Corporation $3,500 NY Bona Via INC. $3,500 NY

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (2 inspections here).

Red River Commodities, INC. 2 insp. Fargo, ND Trinity Yachts, LLC 2 insp. Gulfport, MS A.W.T. World Trade INC 2 insp. Chicago, IL Dimensional Machine Works LLC 2 insp. Houston, TX

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Kohler CO.
Union City, TN
4 inspections $3,500
American Yeast Corporation Tennessee
Memphis, TN
2 inspections $3,500
Hart & Cooley, INC./Heat Fab
Turners Falls, MA
2 inspections $3,500
DT Fowler Manufacturing Company INC
Lapeer, MI
2 inspections $3,500
Bona Via INC.
Rochester, NY
3 inspections $3,500

Compare Midsouth Machine & Welding LLC vs Kohler CO. side-by-side →

What to do with this record

Use Midsouth Machine & Welding LLC's enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Midsouth Machine & Welding LLC against Kohler CO., a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Midsouth Machine & Welding LLC's inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Midsouth Machine & Welding LLC safe to work at? ▼
Based on OSHA records, Midsouth Machine & Welding LLC's workplace safety record is concerning, with multiple serious compliance issues. The employer has 21 violations across 2 inspections, including 12 serious violations. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does Midsouth Machine & Welding LLC have? ▼
Midsouth Machine & Welding LLC has 21 OSHA violations on record, including 12 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $3,500.
How many OSHA inspections has Midsouth Machine & Welding LLC had? ▼
Midsouth Machine & Welding LLC has had 2 OSHA inspections, with the first recorded on 2010-12-09 and the most recent on 2014-01-22. This averages 10.5 violations per inspection.
What is the total penalty amount for Midsouth Machine & Welding LLC? ▼
Midsouth Machine & Welding LLC has been assessed $3,500 in current OSHA penalties, reduced from an initial assessment of $4,300 (a 18.6% reduction).
Does Midsouth Machine & Welding LLC have any serious or willful violations? ▼
Yes. Midsouth Machine & Welding LLC has 12 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Midsouth Machine & Welding LLC operate in? ▼
Midsouth Machine & Welding LLC operates in the Manufacturing sector (NAICS code 332999). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Midsouth Machine & Welding LLC rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Midsouth Machine & Welding LLC ranks #64,975 (the lower half of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Midsouth Machine & Welding LLC's safety record compare to industry average? ▼
Midsouth Machine & Welding LLC's total OSHA penalty of $3,500 is below the Manufacturing industry average of $15,763 per employer. The employer has 2 inspections compared to the industry average of 2.6 per employer. For a direct comparison, DT Fowler Manufacturing Company INC in Lapeer, MI is a similar manufacturing employer with $3,500 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 2 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.