PlainWorker
Employers › WI

Manufacturing · Wausau, WI

Mid-City Precision, LLC

According to OSHA enforcement records (2010–2026), Mid-City Precision, LLC ranks #68,585 of 99,447 penalized U.S. employers by total current penalty, with a concerning safety record: 20 violations across 2 inspections.

Lower half by penalty85% serious
$2,980
OSHA penalties
20
Violations cited
2
OSHA inspections
#68,585
of 99,447 penalized employers

Mid-City Precision, LLC in Wausau, WI has been the subject of 2 OSHA workplace inspections and 20 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $2,980. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Mid-City Precision, LLC 2 times over 1 year - more than twice a year on average. These inspections turned up 20 violations, averaging 10.0 per inspection - an extremely dense concentration of citations. According to OSHA enforcement records, its total current penalty ranks #68,585 of 99,447 penalized U.S. employers (the lower half of penalized employers nationally). Of these, 17 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs moderately below peers (0.8x the sector average) on inspection frequency. For comparison, Peerless Precision, INC. in Westfield, MA is another manufacturing employer with 2 OSHA inspections on record and $2,979 in current penalties.

10.0
violations per inspection
85.0%
of violations were serious
#68,585
of 99,447 penalized employers

Compliance score

F 0/100
  • F OSHA safety compliance: 20 violations across 2 OSHA inspections (10.0 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How Mid-City Precision, LLC compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Mid-City Precision, LLC runs well below peers (0.19x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$2,980 Top 31% most affordable more affordable than 69% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). This entry sits in this band. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Above this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Above this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Mid-City Precision, LLC.

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both1.92.022.02.00.813.125.537.950.3OSHA inspectionsViolations citedOCEAN SASH & DOOR, I…, OSHA inspections: 2 · Violations cited: 39D & D SERVICES INC, OSHA inspections: 2 · Violations cited: 42N & S SUPPLY, OSHA inspections: 2 · Violations cited: 17QUALITY STONE VENEER…, OSHA inspections: 2 · Violations cited: 48HANKINS LUMBER COMPA…, OSHA inspections: 2 · Violations cited: 12STONE ATLANTA COUNTE…, OSHA inspections: 2 · Violations cited: 12IPG, INC., OSHA inspections: 2 · Violations cited: 8TEXTOOL COMPANY, LLC, OSHA inspections: 2 · Violations cited: 36EPIX TUBE CO., INC., OSHA inspections: 2 · Violations cited: 8DRIL-QUIP, INC., OSHA inspections: 2 · Violations cited: 10MNDUSTRIES, INC., OSHA inspections: 2 · Violations cited: 21CMC POLYMERS LLC, OSHA inspections: 2 · Violations cited: 17VALLEY FINE FOODS LLC, OSHA inspections: 2 · Violations cited: 3ACCURATE FAB, OSHA inspections: 2 · Violations cited: 18ICICLE SEAFOODS, INC., OSHA inspections: 2 · Violations cited: 6FRESH & READY FOODS …, OSHA inspections: 2 · Violations cited: 15RESIDENTIAL DESIGN S…, OSHA inspections: 2 · Violations cited: 10JBS FIVE RIVERS CATT…, OSHA inspections: 2 · Violations cited: 7QUALITY TRAILERS ENT…, OSHA inspections: 2 · Violations cited: 22CHEMSTAR PRODUCTS CO…, OSHA inspections: 2 · Violations cited: 7Mid-City Precision, …, OSHA inspections: 2 · Violations cited: 20
Mid-City Precision, LLC has 2 OSHA inspections on record and 20 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Mid-City Precision, LLC in the Manufacturing enforcement ledger

In Manufacturing, Mid-City Precision, LLC sits at penalty rank #27,396 of 35,243 penalized establishments ($2,980 assessed).

How Mid-City Precision, LLC Compares

Mid-City Precision, LLC's 10.00 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs well below peers (0.19x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

2

First Inspection

2025-03-11

Last Inspection

2025-03-11

Inspection Span

1 yr

Violations / Inspection

10.0

Avg Penalty / Inspection

$1,490

Industry Avg / Inspection

$6,093

What this shows 2 inspections over 1 year, averaging 10.0 violations per visit. That's $1,490 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

17

Serious

85.0% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

3

Other-Than-Serious

15.0% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$4,256

Current Penalty Amount

$2,980

Penalty Reduction

30.0%

What this shows Penalties were reduced by $1,276 from the initial assessment of $4,256. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Mid-City Precision, LLC compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Mid-City Precision, LLC Industry Avg
Inspections 2 2.6
Violations 20 8.0
Total Penalty $2,980 $15,763
Avg Penalty per Inspection $1,490 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Mid-City Precision, LLC, both outside WI so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($2,980 here).

S K N Lumber INC $2,980 OR Peerless Precision, INC. $2,979 MA Olympian Machine $2,979 LA Oskaloosa Food Products Corporation $2,978 IA

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (2 inspections here).

Ocean Sash & Door, INC. 2 insp. San Francisco, CA D & D Services INC 2 insp. Vernon, CA N & S Supply 2 insp. Milton, NY Quality Stone Veneer, INC. 2 insp. Benson, NC

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

S K N Lumber INC
Elgin, OR
3 inspections $2,980
Batteries Plus Bulbs
Daytona Beach, FL
0 inspections $0
Peerless Precision, INC.
Westfield, MA
2 inspections $2,979
Olympian Machine
Gray, LA
2 inspections $2,979
Oskaloosa Food Products Corporation
Oskaloosa, IA
2 inspections $2,978

Compare Mid-City Precision, LLC vs S K N Lumber INC side-by-side →

What to do with this record

Use Mid-City Precision, LLC's enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Mid-City Precision, LLC against S K N Lumber INC, a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Mid-City Precision, LLC's inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Mid-City Precision, LLC safe to work at? ▼
Based on OSHA records, Mid-City Precision, LLC's workplace safety record is concerning, with multiple serious compliance issues. The employer has 20 violations across 2 inspections, including 17 serious violations. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does Mid-City Precision, LLC have? ▼
Mid-City Precision, LLC has 20 OSHA violations on record, including 17 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $2,980.
How many OSHA inspections has Mid-City Precision, LLC had? ▼
Mid-City Precision, LLC has had 2 OSHA inspections, with the first recorded on 2025-03-11 and the most recent on 2025-03-11. This averages 10.0 violations per inspection.
What is the total penalty amount for Mid-City Precision, LLC? ▼
Mid-City Precision, LLC has been assessed $2,980 in current OSHA penalties, reduced from an initial assessment of $4,256 (a 30.0% reduction).
Does Mid-City Precision, LLC have any serious or willful violations? ▼
Yes. Mid-City Precision, LLC has 17 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Mid-City Precision, LLC operate in? ▼
Mid-City Precision, LLC operates in the Manufacturing sector (NAICS code 332710). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Mid-City Precision, LLC rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Mid-City Precision, LLC ranks #68,585 (the lower half of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Mid-City Precision, LLC's safety record compare to industry average? ▼
Mid-City Precision, LLC's total OSHA penalty of $2,980 is below the Manufacturing industry average of $15,763 per employer. The employer has 2 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Peerless Precision, INC. in Westfield, MA is a similar manufacturing employer with $2,979 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 2 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.