PlainWorker
Employers › MO

Manufacturing · Joplin, MO

Mid-America Precision Products, LLC

According to OSHA enforcement records (2010–2026), Mid-America Precision Products, LLC ranks #65,878 of 99,447 penalized U.S. employers by total current penalty, with a mixed safety record: 5 violations across 2 inspections.

Lower half by penalty60% serious
$3,332
OSHA penalties
5
Violations cited
2
OSHA inspections
#65,878
of 99,447 penalized employers

Mid-America Precision Products, LLC in Joplin, MO has been the subject of 2 OSHA workplace inspections and 5 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $3,332. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Mid-America Precision Products, LLC 2 times over 4 years, roughly once every couple of years. These inspections resulted in 5 violations, averaging 2.5 per inspection, above what's typical for a single visit. According to OSHA enforcement records, its total current penalty ranks #65,878 of 99,447 penalized U.S. employers (the lower half of penalized employers nationally). Of these, 3 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs moderately below peers (0.8x the sector average) on inspection frequency. For comparison, Chevron Commercial, INC. in Highland, IL is another manufacturing employer with 2 OSHA inspections on record and $3,332 in current penalties.

2.5
violations per inspection
60.0%
of violations were serious
#65,878
of 99,447 penalized employers

Compliance score

D 54/100
  • D OSHA safety compliance: 5 violations across 2 OSHA inspections (2.5 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How this employer compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Mid-America Precision Products, LLC runs well below peers (0.21x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$3,332 Top 34% most affordable more affordable than 66% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). This entry sits in this band. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Above this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Above this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Mid-America Precision Products, LLC.

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both1.92.022.02.0013.426.740.153.5OSHA inspectionsViolations citedOLDCASTLE LAWN & GAR…, OSHA inspections: 2 · Violations cited: 51KEY AUTOMOTIVE OF FL…, OSHA inspections: 2 · Violations cited: 15ASSURA WINDOWS AND D…, OSHA inspections: 2 · Violations cited: 33REDDY ICE CORPORATION, OSHA inspections: 2 · Violations cited: 11JYC AMERICA, OSHA inspections: 2 · Violations cited: 26ROBINSON PHARMA, OSHA inspections: 2 · Violations cited: 2ELKHART PLASTICS LLC, OSHA inspections: 2 · Violations cited: 15PCI ENTERPRISES INC, OSHA inspections: 2 · Violations cited: 6RUSTIC BAKERY, INC., OSHA inspections: 2 · Violations cited: 7TRICON PRECAST LIMITED, OSHA inspections: 2 · Violations cited: 13WIX FILTRATION CORP …, OSHA inspections: 2 · Violations cited: 33ROBERT MILLER, OSHA inspections: 2 · Violations cited: 10NATIONAL COATING COR…, OSHA inspections: 2 · Violations cited: 3TEXAS INTERNAL PIPE …, OSHA inspections: 2 · Violations cited: 13F&B RUBBERIZED, INCO…, OSHA inspections: 2 · Violations cited: 8GMM PFAUDLER U.S INC, OSHA inspections: 2 · Violations cited: 5KDM ENTERPRISES, LLC, OSHA inspections: 2 · Violations cited: 10MILWAUKEE COMPOSITES…, OSHA inspections: 2 · Violations cited: 22KEYSTONE POWDERED ME…, OSHA inspections: 2 · Violations cited: 20UNITED WINDOW & DOOR…, OSHA inspections: 2 · Violations cited: 5Mid-America Precisio…, OSHA inspections: 2 · Violations cited: 5
Mid-America Precision Products, LLC has 2 OSHA inspections on record and 5 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Mid-America Precision Products, LLC in the Manufacturing enforcement ledger

In Manufacturing, Mid-America Precision Products, LLC sits at penalty rank #26,543 of 35,243 penalized establishments ($3,332 assessed).

How Mid-America Precision Products, LLC Compares

Mid-America Precision Products, LLC's 2.50 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs well below peers (0.21x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

2

First Inspection

2010-01-12

Last Inspection

2014-03-11

Inspection Span

4 yrs

Violations / Inspection

2.5

Avg Penalty / Inspection

$1,666

Industry Avg / Inspection

$6,093

What this shows 2 inspections over 4 years, averaging 2.5 violations per visit. That's $1,666 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

3

Serious

60.0% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

2

Other-Than-Serious

40.0% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$9,520

Current Penalty Amount

$3,332

Penalty Reduction

65.0%

What this shows Penalties were reduced by $6,188 from the initial assessment of $9,520. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Mid-America Precision Products, LLC compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Mid-America Precision Products, LLC Industry Avg
Inspections 2 2.6
Violations 5 8.0
Total Penalty $3,332 $15,763
Avg Penalty per Inspection $1,666 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Mid-America Precision Products, LLC, both outside MO so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($3,332 here).

Saeger Machine & Welding, INC. $3,332 PA Piedmont Metal Fabricators $3,332 VA Chevron Commercial, INC. $3,332 IL Service Machine & Tool CO. INC. $3,332 NY

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (2 inspections here).

Oldcastle Lawn & Garden, INC. 2 insp. Shady Dale, GA Key Automotive of Florida, INC. and Its Successors 2 insp. Lakeland, FL Assura Windows and Doors, LLC 2 insp. Pompano Beach, FL Reddy Ice Corporation 2 insp. Austin, TX

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Saeger Machine & Welding, INC.
Harleysville, PA
2 inspections $3,332
Gilbert Industries INC. DBA
Sparta, MO
2 inspections $3,332
Piedmont Metal Fabricators
Louisa, VA
2 inspections $3,332
Chevron Commercial, INC.
Highland, IL
2 inspections $3,332
Service Machine & Tool CO. INC.
Elmira Heights, NY
2 inspections $3,332

Compare Mid-America Precision Products, LLC vs Saeger Machine & Welding, INC. side-by-side →

What to do with this record

Use Mid-America Precision Products, LLC's enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Mid-America Precision Products, LLC against Saeger Machine & Welding, INC., a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Mid-America Precision Products, LLC's inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Mid-America Precision Products, LLC safe to work at? ▼
Based on OSHA records, Mid-America Precision Products, LLC's workplace safety record is mixed, with some compliance concerns. The employer has 5 violations across 2 inspections, including 3 serious violations. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does Mid-America Precision Products, LLC have? ▼
Mid-America Precision Products, LLC has 5 OSHA violations on record, including 3 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $3,332.
How many OSHA inspections has Mid-America Precision Products, LLC had? ▼
Mid-America Precision Products, LLC has had 2 OSHA inspections, with the first recorded on 2010-01-12 and the most recent on 2014-03-11. This averages 2.5 violations per inspection.
What is the total penalty amount for Mid-America Precision Products, LLC? ▼
Mid-America Precision Products, LLC has been assessed $3,332 in current OSHA penalties, reduced from an initial assessment of $9,520 (a 65.0% reduction).
Does Mid-America Precision Products, LLC have any serious or willful violations? ▼
Yes. Mid-America Precision Products, LLC has 3 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Mid-America Precision Products, LLC operate in? ▼
Mid-America Precision Products, LLC operates in the Manufacturing sector (NAICS code 332322). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Mid-America Precision Products, LLC rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Mid-America Precision Products, LLC ranks #65,878 (the lower half of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Mid-America Precision Products, LLC's safety record compare to industry average? ▼
Mid-America Precision Products, LLC's total OSHA penalty of $3,332 is below the Manufacturing industry average of $15,763 per employer. The employer has 2 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Chevron Commercial, INC. in Highland, IL is a similar manufacturing employer with $3,332 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 2 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.