Manufacturing · San Antonio, TX

Microteq Engineering INC

According to OSHA enforcement records (2010–2026), Microteq Engineering INC ranks #37,620 of 99,447 penalized U.S. employers by total current penalty, with a concerning safety record: 26 violations across 2 inspections.

Upper half by penalty85% serious
$9,150
OSHA penalties
26
Violations cited
2
OSHA inspections
#37,620
of 99,447 penalized employers

Microteq Engineering INC in San Antonio, TX has been the subject of 2 OSHA workplace inspections and 26 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $9,150. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Microteq Engineering INC 2 times over 1 year - more than twice a year on average. These inspections turned up 26 violations, averaging 13.0 per inspection - an extremely dense concentration of citations. According to OSHA enforcement records, its total current penalty ranks #37,620 of 99,447 penalized U.S. employers (the upper half of penalized employers nationally). Of these, 22 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs moderately below peers (0.8x the sector average) on inspection frequency. For comparison, B. Braun Medical, INC. in Irvine, CA is another manufacturing employer with 2 OSHA inspections on record and $9,150 in current penalties.

13.0
violations per inspection
84.6%
of violations were serious
#37,620
of 99,447 penalized employers

Compliance score

F 0/100
  • F OSHA safety compliance: 26 violations across 2 OSHA inspections (13.0 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How Microteq Engineering INC compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Microteq Engineering INC runs moderately below peers (0.6x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$9,150 Bottom 38% least affordable more affordable than 38% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). This entry sits in this band. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Above this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Microteq Engineering INC.

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both1.92.022.02.00.49.21826.835.6OSHA inspectionsViolations citedPORT JERVIS LABORATORIES, INC., OSHA inspections: 2 · Violations cited: 5MAGNESITA REFRACTORIES, OSHA inspections: 2 · Violations cited: 7ACCUTRON INC., OSHA inspections: 2 · Violations cited: 30GRANITE RADIANCE, INC., OSHA inspections: 2 · Violations cited: 23PALLET RECYCLE OF ALABAMA, INC., OSHA inspections: 2 · Violations cited: 34AFE VICTORY INC., OSHA inspections: 2 · Violations cited: 34HUTCO, INC., OSHA inspections: 2 · Violations cited: 15CMH MANUFACTURING WEST, INC., OSHA inspections: 2 · Violations cited: 26ALUMINUM CO. OF AMERICA, OSHA inspections: 2 · Violations cited: 7H&H MANUFACTURING CO. INC., OSHA inspections: 2 · Violations cited: 15COMMERCIAL CONSTRUCTION COMPANY, INC., OSHA inspections: 2 · Violations cited: 33RITE STUFF FOODS, INC, OSHA inspections: 2 · Violations cited: 24ANNIN FLAGMAKERS, OSHA inspections: 2 · Violations cited: 2SOLARCITY CORPORATION, OSHA inspections: 2 · Violations cited: 3AC & A LLC, OSHA inspections: 2 · Violations cited: 7PACKAGING CORPORATION OF AMERICA, OSHA inspections: 2 · Violations cited: 4MONARCH BRANDS, INC., OSHA inspections: 2 · Violations cited: 7SIGMA ENGINEERED SOLUTIONS, OSHA inspections: 2 · Violations cited: 12UTILITY TRAILER MANUFACTURING COMPANY, LLC, OSHA inspections: 2 · Violations cited: 3SONOCO PRODUCTS COMPANY, OSHA inspections: 2 · Violations cited: 10Microteq Engineering INC, OSHA inspections: 2 · Violations cited: 26
Microteq Engineering INC has 2 OSHA inspections on record and 26 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Microteq Engineering INC in the Manufacturing enforcement ledger

In Manufacturing, Microteq Engineering INC sits at penalty rank #16,785 of 35,243 penalized establishments ($9,150 assessed).

How Microteq Engineering INC Compares

Microteq Engineering INC's 13.00 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs moderately below peers (0.6x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

2

First Inspection

2010-08-24

Last Inspection

2011-04-06

Inspection Span

1 yr

Violations / Inspection

13.0

Avg Penalty / Inspection

$4,575

Industry Avg / Inspection

$6,093

What this shows 2 inspections over 1 year, averaging 13.0 violations per visit. That's $4,575 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

22

Serious

84.6% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

4

Other-Than-Serious

15.4% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$19,200

Current Penalty Amount

$9,150

Penalty Reduction

52.3%

What this shows Penalties were reduced by $10,050 from the initial assessment of $19,200. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Microteq Engineering INC compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Microteq Engineering INC Industry Avg
Inspections 2 2.6
Violations 26 8.0
Total Penalty $9,150 $15,763
Avg Penalty per Inspection $4,575 $6,093

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Microteq Engineering INC, both outside TX so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($9,150 here).

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (2 inspections here).

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Compare Microteq Engineering INC vs B. Braun Medical, INC. side-by-side →

What to do with this record

Use Microteq Engineering INC's enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Microteq Engineering INC against B. Braun Medical, INC., a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Microteq Engineering INC's inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Microteq Engineering INC safe to work at?
Based on OSHA records, Microteq Engineering INC's workplace safety record is concerning, with multiple serious compliance issues. The employer has 26 violations across 2 inspections, including 22 serious violations. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does Microteq Engineering INC have?
Microteq Engineering INC has 26 OSHA violations on record, including 22 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $9,150.
How many OSHA inspections has Microteq Engineering INC had?
Microteq Engineering INC has had 2 OSHA inspections, with the first recorded on 2010-08-24 and the most recent on 2011-04-06. This averages 13.0 violations per inspection.
What is the total penalty amount for Microteq Engineering INC?
Microteq Engineering INC has been assessed $9,150 in current OSHA penalties, reduced from an initial assessment of $19,200 (a 52.3% reduction).
Does Microteq Engineering INC have any serious or willful violations?
Yes. Microteq Engineering INC has 22 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Microteq Engineering INC operate in?
Microteq Engineering INC operates in the Manufacturing sector (NAICS code 332999). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Microteq Engineering INC rank nationally on OSHA penalties?
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Microteq Engineering INC ranks #37,620 (the upper half of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Microteq Engineering INC's safety record compare to industry average?
Microteq Engineering INC's total OSHA penalty of $9,150 is below the Manufacturing industry average of $15,763 per employer. The employer has 2 inspections compared to the industry average of 2.6 per employer. For a direct comparison, B. Braun Medical, INC. in Irvine, CA is a similar manufacturing employer with $9,150 in current penalties.
Data Sources & Methodology

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 2 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.