PlainWorker
Employers › NY

Manufacturing · Newark, NY

Micro-Tech Machine Incorporated

According to OSHA enforcement records (2010–2026), Micro-Tech Machine Incorporated ranks #60,300 of 99,447 penalized U.S. employers by total current penalty, with a relatively clean safety record: 2 violations across 3 inspections.

Lower half by penalty100% serious
$4,193
OSHA penalties
2
Violations cited
3
OSHA inspections
#60,300
of 99,447 penalized employers

Micro-Tech Machine Incorporated in Newark, NY has been the subject of 3 OSHA workplace inspections and 2 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $4,193. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Micro-Tech Machine Incorporated 3 times across a longer 15-year span, an infrequent cadence. These inspections resulted in 2 violations, averaging 0.7 per inspection, on the lighter side. According to OSHA enforcement records, its total current penalty ranks #60,300 of 99,447 penalized U.S. employers (the lower half of penalized employers nationally). Of these, 2 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this sits roughly in line with peers (1.2x the sector average) on inspection frequency. For comparison, Zepsa Industries, INC in Charlotte, NC is another manufacturing employer with 2 OSHA inspections on record and $4,195 in current penalties.

0.7
violations per inspection
100.0%
of violations were serious
#60,300
of 99,447 penalized employers

Compliance score

B 80/100
  • B OSHA safety compliance: 2 violations across 3 OSHA inspections (0.7 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How this employer compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Micro-Tech Machine Incorporated runs well below peers (0.27x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$4,193 Top 39% most affordable more affordable than 61% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). This entry sits in this band. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Above this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Above this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Micro-Tech Machine Incorporated.

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both3.03.033.03.0012.324.636.949.3OSHA inspectionsViolations citedPUKALL LUMBER COMPAN…, OSHA inspections: 3 · Violations cited: 40WILBERT, INC., OSHA inspections: 3 · Violations cited: 27H.B. FULLER COMPANY, OSHA inspections: 3 · Violations cited: 8AJM PACKAGING CORPOR…, OSHA inspections: 3 · Violations cited: 7RIGHTWAY MANUFACTURI…, OSHA inspections: 3 · Violations cited: 2PERFORMANCE FEEDERS,…, OSHA inspections: 3 · Violations cited: 30DIERZEN TRAILER CO., OSHA inspections: 3 · Violations cited: 7GC PALLET AND STORAG…, OSHA inspections: 3 · Violations cited: 18SUPREME OIL CENTRAL …, OSHA inspections: 3 · Violations cited: 47WASHBURN & DOUGHTY A…, OSHA inspections: 3 · Violations cited: 13J.S.B. INDUSTRIES, I…, OSHA inspections: 3 · Violations cited: 7INTERCERAMIC INC., OSHA inspections: 3 · Violations cited: 10LUMBER AND THINGS, I…, OSHA inspections: 3 · Violations cited: 6BAKE ONE, INC., OSHA inspections: 3 · Violations cited: 14MACO MANUFACTURING, …, OSHA inspections: 3 · Violations cited: 12TYSON FOODS, OSHA inspections: 3 · Violations cited: 8MARCO FINE ARTS, OSHA inspections: 3 · Violations cited: 13CAROLINA PRIDE, OSHA inspections: 3 · Violations cited: 18DEKALB TOOL & DIE, INC, OSHA inspections: 3 · Violations cited: 17BIJOL AND SPICES INC., OSHA inspections: 3 · Violations cited: 21Micro-Tech Machine I…, OSHA inspections: 3 · Violations cited: 2
Micro-Tech Machine Incorporated has 3 OSHA inspections on record and 2 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Micro-Tech Machine Incorporated in the Manufacturing enforcement ledger

In Manufacturing, Micro-Tech Machine Incorporated sits at penalty rank #24,743 of 35,243 penalized establishments ($4,193 assessed).

How Micro-Tech Machine Incorporated Compares

Micro-Tech Machine Incorporated's 0.67 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs well below peers (0.27x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

3

First Inspection

2010-04-01

Last Inspection

2025-06-25

Inspection Span

15 yrs

Violations / Inspection

0.7

Avg Penalty / Inspection

$1,398

Industry Avg / Inspection

$6,093

What this shows 3 inspections over 15 years, averaging 0.7 violations per visit. That's $1,398 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

2

Serious

100.0% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

0

Other-Than-Serious

0.0% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$6,188

Current Penalty Amount

$4,193

Penalty Reduction

32.2%

What this shows Penalties were reduced by $1,995 from the initial assessment of $6,188. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Micro-Tech Machine Incorporated compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Micro-Tech Machine Incorporated Industry Avg
Inspections 3 2.6
Violations 2 8.0
Total Penalty $4,193 $15,763
Avg Penalty per Inspection $1,398 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Micro-Tech Machine Incorporated, both outside NY so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($4,193 here).

Creator Designs $4,193 MO Fusite Corporation $4,192 OH Syncom Electronics Corporation $4,195 VA Zepsa Industries, INC $4,195 NC

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (3 inspections here).

Pukall Lumber Company, INC. 3 insp. Arbor Vitae, WI Wilbert, INC. 3 insp. Bellevue, OH H.B. Fuller Company 3 insp. Frankfort, IL Ajm Packaging Corporation 3 insp. El Cajon, CA

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Creator Designs
Bolivar, MO
2 inspections $4,193
Fusite Corporation
Cincinnati, OH
4 inspections $4,192
Prestige D Inc
Miami, FL
0 inspections $0
Syncom Electronics Corporation
Roanoke, VA
2 inspections $4,195
Zepsa Industries, INC
Charlotte, NC
2 inspections $4,195

Compare Micro-Tech Machine Incorporated vs Creator Designs side-by-side →

What to do with this record

Use Micro-Tech Machine Incorporated's enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Micro-Tech Machine Incorporated against Creator Designs, a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Micro-Tech Machine Incorporated's inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Micro-Tech Machine Incorporated safe to work at? ▼
Based on OSHA records, Micro-Tech Machine Incorporated's workplace safety record is relatively clean, with fewer violations than typical. The employer has 2 violations across 3 inspections, including 2 serious violations. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does Micro-Tech Machine Incorporated have? ▼
Micro-Tech Machine Incorporated has 2 OSHA violations on record, including 2 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $4,193.
How many OSHA inspections has Micro-Tech Machine Incorporated had? ▼
Micro-Tech Machine Incorporated has had 3 OSHA inspections, with the first recorded on 2010-04-01 and the most recent on 2025-06-25. This averages 0.7 violations per inspection.
What is the total penalty amount for Micro-Tech Machine Incorporated? ▼
Micro-Tech Machine Incorporated has been assessed $4,193 in current OSHA penalties, reduced from an initial assessment of $6,188 (a 32.2% reduction).
Does Micro-Tech Machine Incorporated have any serious or willful violations? ▼
Yes. Micro-Tech Machine Incorporated has 2 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Micro-Tech Machine Incorporated operate in? ▼
Micro-Tech Machine Incorporated operates in the Manufacturing sector (NAICS code 332721). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Micro-Tech Machine Incorporated rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Micro-Tech Machine Incorporated ranks #60,300 (the lower half of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Micro-Tech Machine Incorporated's safety record compare to industry average? ▼
Micro-Tech Machine Incorporated's total OSHA penalty of $4,193 is below the Manufacturing industry average of $15,763 per employer. The employer has 3 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Zepsa Industries, INC in Charlotte, NC is a similar manufacturing employer with $4,195 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 3 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.