PlainWorker
Employers › FL

Manufacturing · Orlando, FL

Metalmaster Machine Shop, INC.

According to OSHA enforcement records (2010–2026), Metalmaster Machine Shop, INC. ranks #24,518 of 99,447 penalized U.S. employers by total current penalty, with a concerning safety record: 14 violations across 3 inspections.

Top 25% by penalty64% serious
$14,761
OSHA penalties
14
Violations cited
3
OSHA inspections
#24,518
of 99,447 penalized employers

Metalmaster Machine Shop, INC. in Orlando, FL has been the subject of 3 OSHA workplace inspections and 14 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $14,761. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Metalmaster Machine Shop, INC. 3 times across a longer 10-year span, an infrequent cadence. These inspections resulted in 14 violations, averaging 4.7 per inspection, above what's typical for a single visit. According to OSHA enforcement records, its total current penalty ranks #24,518 of 99,447 penalized U.S. employers (the top quarter of penalized employers nationally). Of these, 9 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this sits roughly in line with peers (1.2x the sector average) on inspection frequency. For comparison, Stuart Steel Protection Corporation in Somerset, NJ is another manufacturing employer with 2 OSHA inspections on record and $14,760 in current penalties.

4.7
violations per inspection
64.3%
of violations were serious
#24,518
of 99,447 penalized employers

Compliance score

F 22/100
  • F OSHA safety compliance: 14 violations across 3 OSHA inspections (4.7 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How Metalmaster Machine Shop, INC. compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Metalmaster Machine Shop, INC. sits roughly in line with peers (0.9x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$14,761 Bottom 25% least affordable more affordable than 25% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Below this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). This entry sits in this band. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Metalmaster Machine Shop, INC..

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both3.03.033.03.02.311.721.030.439.7OSHA inspectionsViolations citedGOLDTHREAD LLC, OSHA inspections: 3 · Violations cited: 19MOLY MANUFACTURING INC, OSHA inspections: 3 · Violations cited: 23SMITTY'S SUPPLY, INC., OSHA inspections: 3 · Violations cited: 11Schweid And Sons, OSHA inspections: 3 · Violations cited: 5ENGINEERED MATERIALS…, OSHA inspections: 3 · Violations cited: 4PRIORITY PLASTICS, I…, OSHA inspections: 3 · Violations cited: 38CONCORD SUPPLY INC., OSHA inspections: 3 · Violations cited: 18PRIME PRODUCTS, INC., OSHA inspections: 3 · Violations cited: 15SONOCO PRODUCTS COMP…, OSHA inspections: 3 · Violations cited: 5SPECIALTY PROMOTIONS…, OSHA inspections: 3 · Violations cited: 12CREATIVE STONE MFG.,…, OSHA inspections: 3 · Violations cited: 13KENOSHA BEEF INTERNA…, OSHA inspections: 3 · Violations cited: 13SILK CITY PRINTING, …, OSHA inspections: 3 · Violations cited: 12US STONE IND. LLC, OSHA inspections: 3 · Violations cited: 5GLIDEWELL SPECIALTIE…, OSHA inspections: 3 · Violations cited: 13ROTARY CORPORATION, …, OSHA inspections: 3 · Violations cited: 10WILLOW FORK PALLET CO, OSHA inspections: 3 · Violations cited: 8SUN CHEMICAL CORPORA…, OSHA inspections: 3 · Violations cited: 10EDELBROCK PERMANENT …, OSHA inspections: 3 · Violations cited: 5POTTS WELDING & BOIL…, OSHA inspections: 3 · Violations cited: 11Metalmaster Machine …, OSHA inspections: 3 · Violations cited: 14
Metalmaster Machine Shop, INC. has 3 OSHA inspections on record and 14 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Metalmaster Machine Shop, INC. in the Manufacturing enforcement ledger

Manufacturing sector: Metalmaster Machine Shop, INC. is the #11,577 heaviest OSHA penalty carrier of 35,243 employers with nonzero fines ($14,761).

How Metalmaster Machine Shop, INC. Compares

Metalmaster Machine Shop, INC.'s 4.67 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty sits roughly in line with peers (0.9x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

3

First Inspection

2014-07-07

Last Inspection

2024-03-05

Inspection Span

10 yrs

Violations / Inspection

4.7

Avg Penalty / Inspection

$4,920

Industry Avg / Inspection

$6,093

What this shows 3 inspections over 10 years, averaging 4.7 violations per visit. That's $4,920 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

9

Serious

64.3% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

5

Other-Than-Serious

35.7% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$28,570

Current Penalty Amount

$14,761

Penalty Reduction

48.3%

What this shows Penalties were reduced by $13,809 from the initial assessment of $28,570. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Metalmaster Machine Shop, INC. compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Metalmaster Machine Shop, INC. Industry Avg
Inspections 3 2.6
Violations 14 8.0
Total Penalty $14,761 $15,763
Avg Penalty per Inspection $4,920 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Metalmaster Machine Shop, INC., both outside FL so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($14,761 here).

Paragon Industries Inc $14,760 OK Ove Water Services, INC. $14,762 WI Tramontina US Cookware, INC. $14,760 WI Lear CORP $14,760 MI

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (3 inspections here).

Goldthread LLC 3 insp. Springfield, MA Moly Manufacturing INC 3 insp. Ellsworth, KS Smitty's Supply, INC. 3 insp. Roseland, LA Schweid And Sons 3 insp. Carlstadt, NJ

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Ove Water Services, INC.
Mukwonago, WI
3 inspections $14,762
Tramontina US Cookware, INC.
Manitowoc, WI
2 inspections $14,760
Lear CORP
Roscommon, MI
7 inspections $14,760
Stuart Steel Protection Corporation
Somerset, NJ
2 inspections $14,760
RP&G of Quincy, INC.
Quincy, IL
3 inspections $14,757

Compare Metalmaster Machine Shop, INC. vs Ove Water Services, INC. side-by-side →

What to do with this record

Use Metalmaster Machine Shop, INC.'s enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Metalmaster Machine Shop, INC. against Ove Water Services, INC., a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Metalmaster Machine Shop, INC.'s inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Metalmaster Machine Shop, INC. safe to work at? ▼
Based on OSHA records, Metalmaster Machine Shop, INC.'s workplace safety record is concerning, with multiple serious compliance issues. The employer has 14 violations across 3 inspections, including 9 serious violations. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does Metalmaster Machine Shop, INC. have? ▼
Metalmaster Machine Shop, INC. has 14 OSHA violations on record, including 9 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $14,761.
How many OSHA inspections has Metalmaster Machine Shop, INC. had? ▼
Metalmaster Machine Shop, INC. has had 3 OSHA inspections, with the first recorded on 2014-07-07 and the most recent on 2024-03-05. This averages 4.7 violations per inspection.
What is the total penalty amount for Metalmaster Machine Shop, INC.? ▼
Metalmaster Machine Shop, INC. has been assessed $14,761 in current OSHA penalties, reduced from an initial assessment of $28,570 (a 48.3% reduction).
Does Metalmaster Machine Shop, INC. have any serious or willful violations? ▼
Yes. Metalmaster Machine Shop, INC. has 9 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Metalmaster Machine Shop, INC. operate in? ▼
Metalmaster Machine Shop, INC. operates in the Manufacturing sector (NAICS code 332710). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Metalmaster Machine Shop, INC. rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Metalmaster Machine Shop, INC. ranks #24,518 (the top quarter of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Metalmaster Machine Shop, INC.'s safety record compare to industry average? ▼
Metalmaster Machine Shop, INC.'s total OSHA penalty of $14,761 is below the Manufacturing industry average of $15,763 per employer. The employer has 3 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Stuart Steel Protection Corporation in Somerset, NJ is a similar manufacturing employer with $14,760 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 3 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.