PlainWorker
Employers › OH

Manufacturing · Twinsburg, OH

Metaldyne Powertrain Components, INC.

According to OSHA enforcement records (2010–2026), Metaldyne Powertrain Components, INC. ranks #15,542 of 99,447 penalized U.S. employers by total current penalty, with a mixed safety record: 4 violations across 2 inspections.

Top 25% by penalty75% serious
$22,152
OSHA penalties
4
Violations cited
2
OSHA inspections
#15,542
of 99,447 penalized employers

Metaldyne Powertrain Components, INC. in Twinsburg, OH has been the subject of 2 OSHA workplace inspections and 4 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $22,152. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Metaldyne Powertrain Components, INC. 2 times across a longer 5-year span, an infrequent cadence. These inspections resulted in 4 violations, averaging 2.0 per inspection, above what's typical for a single visit. According to OSHA enforcement records, its total current penalty ranks #15,542 of 99,447 penalized U.S. employers (the top quarter of penalized employers nationally). Of these, 3 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs moderately below peers (0.8x the sector average) on inspection frequency. For comparison, L&L Pallet Supply INC. in Muleshoe, TX is another manufacturing employer with 4 OSHA inspections on record and $22,160 in current penalties.

2.0
violations per inspection
75.0%
of violations were serious
#15,542
of 99,447 penalized employers

Compliance score

D 61/100
  • D OSHA safety compliance: 4 violations across 2 OSHA inspections (2.0 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How this employer compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Metaldyne Powertrain Components, INC. runs moderately above peers (1.4x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$22,152 Bottom 16% least affordable more affordable than 16% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Below this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Below this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Below this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). This entry sits in this band. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Metaldyne Powertrain Components, INC..

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both1.92.022.02.0016.833.550.367.0OSHA inspectionsViolations citedOPTIMA STANTRON CORP…, OSHA inspections: 2 · Violations cited: 31STRAUSS FEEDS, L.L.C., OSHA inspections: 2 · Violations cited: 28PARKER- HANNIFIN COR…, OSHA inspections: 2 · Violations cited: 14ADONEL CONCRETE CORP., OSHA inspections: 2 · Violations cited: 20REHRIG PACIFIC COMPANY, OSHA inspections: 2 · Violations cited: 8SHEDS UNLIMITED LLC, OSHA inspections: 2 · Violations cited: 20MUELLER COPPER TUBE …, OSHA inspections: 2 · Violations cited: 18SHELL OIL PRODUCTS C…, OSHA inspections: 2 · Violations cited: 8TEMPCO ELECTRIC HEAT…, OSHA inspections: 2 · Violations cited: 6QUALITY ENGINEERED S…, OSHA inspections: 2 · Violations cited: 64DAVISCO FOODS INTERN…, OSHA inspections: 2 · Violations cited: 21ADVANCED STROBE PROD…, OSHA inspections: 2 · Violations cited: 31AVIENT CORPORATION, OSHA inspections: 2 · Violations cited: 6SIMPLY NATURAL FOODS…, OSHA inspections: 2 · Violations cited: 11BORGHI USA INC., OSHA inspections: 2 · Violations cited: 8GERARD DANIEL WORLDW…, OSHA inspections: 2 · Violations cited: 3OWENS CORNING, OSHA inspections: 2 · Violations cited: 5MIDWEST PRECISION INC., OSHA inspections: 2 · Violations cited: 3ACE STEEL & RECYCLIN…, OSHA inspections: 2 · Violations cited: 16CUTRALE CITRUS JUICE…, OSHA inspections: 2 · Violations cited: 12Metaldyne Powertrain…, OSHA inspections: 2 · Violations cited: 4
Metaldyne Powertrain Components, INC. has 2 OSHA inspections on record and 4 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Metaldyne Powertrain Components, INC. in the Manufacturing enforcement ledger

In Manufacturing, Metaldyne Powertrain Components, INC. sits at penalty rank #7,577 of 35,243 penalized establishments ($22,152 assessed).

How Metaldyne Powertrain Components, INC. Compares

Metaldyne Powertrain Components, INC.'s 2.00 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs moderately above peers (1.4x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

2

First Inspection

2013-10-28

Last Inspection

2018-08-29

Inspection Span

5 yrs

Violations / Inspection

2.0

Avg Penalty / Inspection

$11,076

Industry Avg / Inspection

$6,093

What this shows 2 inspections over 5 years, averaging 2.0 violations per visit. That's $11,076 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

3

Serious

75.0% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

1

Other-Than-Serious

25.0% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$37,097

Current Penalty Amount

$22,152

Penalty Reduction

40.3%

What this shows Penalties were reduced by $14,945 from the initial assessment of $37,097. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Metaldyne Powertrain Components, INC. compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Metaldyne Powertrain Components, INC. Industry Avg
Inspections 2 2.6
Violations 4 8.0
Total Penalty $22,152 $15,763
Avg Penalty per Inspection $11,076 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Metaldyne Powertrain Components, INC., both outside OH so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($22,152 here).

48forty Solutions LLC $22,150 TN Aristo Industries $22,150 MI Interlectric Corporation $22,150 PA Ssab Alabama, INC. $22,156 AL

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (2 inspections here).

Optima Stantron CORP. Div of Elma Electronic INC. 2 insp. Lawrenceville, GA Strauss Feeds, L.L.C. 2 insp. Watertown, WI Parker- Hannifin Corporation 2 insp. Grantsburg, WI Adonel Concrete CORP. 2 insp. West Palm Beach, FL

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

48forty Solutions LLC
Nashville, TN
2 inspections $22,150
Aristo Industries
Harrison Township, MI
4 inspections $22,150
Interlectric Corporation
Warren, PA
3 inspections $22,150
Ssab Alabama, INC.
Axis, AL
7 inspections $22,156
L&L Pallet Supply INC.
Muleshoe, TX
4 inspections $22,160

Compare Metaldyne Powertrain Components, INC. vs 48forty Solutions LLC side-by-side →

What to do with this record

Use Metaldyne Powertrain Components, INC.'s enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Metaldyne Powertrain Components, INC. against 48forty Solutions LLC, a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Metaldyne Powertrain Components, INC.'s inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Metaldyne Powertrain Components, INC. safe to work at? ▼
Based on OSHA records, Metaldyne Powertrain Components, INC.'s workplace safety record is mixed, with some compliance concerns. The employer has 4 violations across 2 inspections, including 3 serious violations. Compared to Manufacturing industry peers, this is above average for penalties. Review the full inspection history below for details.
How many OSHA violations does Metaldyne Powertrain Components, INC. have? ▼
Metaldyne Powertrain Components, INC. has 4 OSHA violations on record, including 3 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $22,152.
How many OSHA inspections has Metaldyne Powertrain Components, INC. had? ▼
Metaldyne Powertrain Components, INC. has had 2 OSHA inspections, with the first recorded on 2013-10-28 and the most recent on 2018-08-29. This averages 2.0 violations per inspection.
What is the total penalty amount for Metaldyne Powertrain Components, INC.? ▼
Metaldyne Powertrain Components, INC. has been assessed $22,152 in current OSHA penalties, reduced from an initial assessment of $37,097 (a 40.3% reduction).
Does Metaldyne Powertrain Components, INC. have any serious or willful violations? ▼
Yes. Metaldyne Powertrain Components, INC. has 3 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Metaldyne Powertrain Components, INC. operate in? ▼
Metaldyne Powertrain Components, INC. operates in the Manufacturing sector (NAICS code 333618). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Metaldyne Powertrain Components, INC. rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Metaldyne Powertrain Components, INC. ranks #15,542 (the top quarter of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Metaldyne Powertrain Components, INC.'s safety record compare to industry average? ▼
Metaldyne Powertrain Components, INC.'s total OSHA penalty of $22,152 is above the Manufacturing industry average of $15,763 per employer (1.4x the average). The employer has 2 inspections compared to the industry average of 2.6 per employer. For a direct comparison, L&L Pallet Supply INC. in Muleshoe, TX is a similar manufacturing employer with $22,160 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 2 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.