PlainWorker
Employers › TX

Manufacturing · Mission, TX

Metal Processing International, L.P.

According to OSHA enforcement records (2010–2026), Metal Processing International, L.P. ranks #35,898 of 99,447 penalized U.S. employers by total current penalty, with a concerning safety record: 7 violations across 2 inspections.

Upper half by penalty29% serious
$9,727
OSHA penalties
7
Violations cited
2
OSHA inspections
#35,898
of 99,447 penalized employers

Metal Processing International, L.P. in Mission, TX has been the subject of 2 OSHA workplace inspections and 7 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $9,727. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Metal Processing International, L.P. 2 times across a longer 9-year span, an infrequent cadence. These inspections resulted in 7 violations, averaging 3.5 per inspection, above what's typical for a single visit. According to OSHA enforcement records, its total current penalty ranks #35,898 of 99,447 penalized U.S. employers (the upper half of penalized employers nationally). Of these, 2 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs moderately below peers (0.8x the sector average) on inspection frequency. For comparison, Taleo Worldwide Offices in Dublin, CA is another manufacturing employer with 0 OSHA inspections on record and $0 in current penalties.

3.5
violations per inspection
28.6%
of violations were serious
#35,898
of 99,447 penalized employers

Compliance score

F 39/100
  • F OSHA safety compliance: 7 violations across 2 OSHA inspections (3.5 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How this employer compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Metal Processing International, L.P. runs moderately below peers (0.6x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$9,727 Bottom 36% least affordable more affordable than 36% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). This entry sits in this band. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Above this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Metal Processing International, L.P..

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both1.92.022.02.00.912.724.536.348.1OSHA inspectionsViolations citedRED RIVER COMMODITIE…, OSHA inspections: 2 · Violations cited: 14TRINITY YACHTS, LLC, OSHA inspections: 2 · Violations cited: 23A.W.T. WORLD TRADE INC, OSHA inspections: 2 · Violations cited: 46WICO METAL PRODUCTS, OSHA inspections: 2 · Violations cited: 11KOST USA LLC, OSHA inspections: 2 · Violations cited: 7DAY-LEE FOODS, INC., OSHA inspections: 2 · Violations cited: 5THE HARTY PRESS INC., OSHA inspections: 2 · Violations cited: 17IBC ENGINEERED MATER…, OSHA inspections: 2 · Violations cited: 20KDC ONE NORTHERN LABS, OSHA inspections: 2 · Violations cited: 6ISABELLE'S KITCHEN, …, OSHA inspections: 2 · Violations cited: 11METALICO ALUMINUM RE…, OSHA inspections: 2 · Violations cited: 37THE BUCKEYE STAMPING…, OSHA inspections: 2 · Violations cited: 9HUNTER DOUGLAS ARCHI…, OSHA inspections: 2 · Violations cited: 11CONSOLIDATED PRECISI…, OSHA inspections: 2 · Violations cited: 3ACCENT DISPLAY CORPO…, OSHA inspections: 2 · Violations cited: 20SADLER MACHINE CO INC, OSHA inspections: 2 · Violations cited: 7KELLOGG SUPPLY INC, OSHA inspections: 2 · Violations cited: 5DESIGN SHOWER DOORS …, OSHA inspections: 2 · Violations cited: 4MAGENTA LLC, OSHA inspections: 2 · Violations cited: 4NORTHFIELD HOLDINGS,…, OSHA inspections: 2 · Violations cited: 7Metal Processing Int…, OSHA inspections: 2 · Violations cited: 7
Metal Processing International, L.P. has 2 OSHA inspections on record and 7 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Metal Processing International, L.P. in the Manufacturing enforcement ledger

Among 35,243 Manufacturing employers with OSHA penalties on file, Metal Processing International, L.P. ranks #16,109 at $9,727 current penalty.

How Metal Processing International, L.P. Compares

Metal Processing International, L.P.'s 3.50 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs moderately below peers (0.6x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

2

First Inspection

2010-10-28

Last Inspection

2020-01-07

Inspection Span

9 yrs

Violations / Inspection

3.5

Avg Penalty / Inspection

$4,864

Industry Avg / Inspection

$6,093

What this shows 2 inspections over 9 years, averaging 3.5 violations per visit. That's $4,864 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

2

Serious

28.6% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

5

Other-Than-Serious

71.4% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$20,947

Current Penalty Amount

$9,727

Penalty Reduction

53.6%

What this shows Penalties were reduced by $11,220 from the initial assessment of $20,947. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Metal Processing International, L.P. compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Metal Processing International, L.P. Industry Avg
Inspections 2 2.6
Violations 7 8.0
Total Penalty $9,727 $15,763
Avg Penalty per Inspection $4,864 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Metal Processing International, L.P., both outside TX so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($9,727 here).

Better Living Components, INC. $9,727 VA Cumberland Architectural Millwork, INC. $9,726 TN The Window and Door Shop, INC. $9,725 CA NCL Graphic Specialties, INC. $9,725 WI

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (2 inspections here).

Red River Commodities, INC. 2 insp. Fargo, ND Trinity Yachts, LLC 2 insp. Gulfport, MS A.W.T. World Trade INC 2 insp. Chicago, IL Wico Metal Products 2 insp. Warren, MI

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Better Living Components, INC.
Charlottesville, VA
3 inspections $9,727
Cumberland Architectural Millwork, INC.
Nashville, TN
4 inspections $9,726
The Window and Door Shop, INC.
San Francisco, CA
2 inspections $9,725
NCL Graphic Specialties, INC.
Waukesha, WI
2 inspections $9,725
Taleo Worldwide Offices
Dublin, CA
0 inspections $0

Compare Metal Processing International, L.P. vs Better Living Components, INC. side-by-side →

What to do with this record

Use Metal Processing International, L.P.'s enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Metal Processing International, L.P. against Better Living Components, INC., a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Metal Processing International, L.P.'s inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Metal Processing International, L.P. safe to work at? ▼
Based on OSHA records, Metal Processing International, L.P.'s workplace safety record is concerning, with multiple serious compliance issues. The employer has 7 violations across 2 inspections, including 2 serious violations. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does Metal Processing International, L.P. have? ▼
Metal Processing International, L.P. has 7 OSHA violations on record, including 2 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $9,727.
How many OSHA inspections has Metal Processing International, L.P. had? ▼
Metal Processing International, L.P. has had 2 OSHA inspections, with the first recorded on 2010-10-28 and the most recent on 2020-01-07. This averages 3.5 violations per inspection.
What is the total penalty amount for Metal Processing International, L.P.? ▼
Metal Processing International, L.P. has been assessed $9,727 in current OSHA penalties, reduced from an initial assessment of $20,947 (a 53.6% reduction).
Does Metal Processing International, L.P. have any serious or willful violations? ▼
Yes. Metal Processing International, L.P. has 2 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Metal Processing International, L.P. operate in? ▼
Metal Processing International, L.P. operates in the Manufacturing sector (NAICS code 332812). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Metal Processing International, L.P. rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Metal Processing International, L.P. ranks #35,898 (the upper half of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Metal Processing International, L.P.'s safety record compare to industry average? ▼
Metal Processing International, L.P.'s total OSHA penalty of $9,727 is below the Manufacturing industry average of $15,763 per employer. The employer has 2 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Taleo Worldwide Offices in Dublin, CA is a similar manufacturing employer with $0 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 2 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.