PlainWorker
Employers › NC

Manufacturing · Greensboro, NC

McAd INC. DBA Carolina Custom Surfaces

According to OSHA enforcement records (2010–2026), McAd INC. DBA Carolina Custom Surfaces ranks #65,279 of 99,447 penalized U.S. employers by total current penalty, with a concerning safety record: 32 violations across 2 inspections.

Lower half by penalty72% serious
$3,430
OSHA penalties
32
Violations cited
2
OSHA inspections
#65,279
of 99,447 penalized employers

McAd INC. DBA Carolina Custom Surfaces in Greensboro, NC has been the subject of 2 OSHA workplace inspections and 32 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $3,430. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected McAd INC. DBA Carolina Custom Surfaces 2 times over 1 year - more than twice a year on average. These inspections turned up 32 violations, averaging 16.0 per inspection - an extremely dense concentration of citations. According to OSHA enforcement records, its total current penalty ranks #65,279 of 99,447 penalized U.S. employers (the lower half of penalized employers nationally). Of these, 23 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs moderately below peers (0.8x the sector average) on inspection frequency. For comparison, J & J Technologies, INC. in Wareham, MA is another manufacturing employer with 2 OSHA inspections on record and $3,430 in current penalties.

16.0
violations per inspection
71.9%
of violations were serious
#65,279
of 99,447 penalized employers

Compliance score

F 0/100
  • F OSHA safety compliance: 32 violations across 2 OSHA inspections (16.0 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How this employer compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows McAd INC. DBA Carolina Custom Surfaces runs well below peers (0.22x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$3,430 Top 34% most affordable more affordable than 66% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). This entry sits in this band. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Above this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Above this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is McAd INC. DBA Carolina Custom Surfaces.

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both1.92.022.02.00.210.120.029.939.8OSHA inspectionsViolations citedSILVER BAY SEAFOODS,…, OSHA inspections: 2 · Violations cited: 5PRECISION BUILD SOLU…, OSHA inspections: 2 · Violations cited: 7CARMEN CREATIVE CABI…, OSHA inspections: 2 · Violations cited: 38MEGLIO INTERIORS, LLC, OSHA inspections: 2 · Violations cited: 14WEST COAST IRON, INC., OSHA inspections: 2 · Violations cited: 12NITREX INC., OSHA inspections: 2 · Violations cited: 22GREATWIDE DISTRIBUTI…, OSHA inspections: 2 · Violations cited: 3ALLIED TUBE AND COND…, OSHA inspections: 2 · Violations cited: 16MASTERCRAFTERS, INC., OSHA inspections: 2 · Violations cited: 29COASTAL INDUSTRIES, …, OSHA inspections: 2 · Violations cited: 15ASSONET INDUSTRIES, …, OSHA inspections: 2 · Violations cited: 20BALDWIN FILTERS INC, OSHA inspections: 2 · Violations cited: 7MICROTECH KNIVES, INC., OSHA inspections: 2 · Violations cited: 24ROYAL INTERPACK NORT…, OSHA inspections: 2 · Violations cited: 11PIQUA CHAMPION FOUND…, OSHA inspections: 2 · Violations cited: 21THE EUCLID CHEMICAL …, OSHA inspections: 2 · Violations cited: 2B Y MARBLE INC, OSHA inspections: 2 · Violations cited: 10JV MANUFACTURING, INC., OSHA inspections: 2 · Violations cited: 3AJINOMOTO FOODS NORT…, OSHA inspections: 2 · Violations cited: 13NORTHERN WIND, INC., OSHA inspections: 2 · Violations cited: 9McAd INC. DBA Caroli…, OSHA inspections: 2 · Violations cited: 32
McAd INC. DBA Carolina Custom Surfaces has 2 OSHA inspections on record and 32 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

McAd INC. DBA Carolina Custom Surfaces in the Manufacturing enforcement ledger

Among 35,243 Manufacturing employers with OSHA penalties on file, McAd INC. DBA Carolina Custom Surfaces ranks #26,348 at $3,430 current penalty.

How McAd INC. DBA Carolina Custom Surfaces Compares

McAd INC. DBA Carolina Custom Surfaces's 16.00 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs well below peers (0.22x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

2

First Inspection

2011-02-09

Last Inspection

2011-06-22

Inspection Span

1 yr

Violations / Inspection

16.0

Avg Penalty / Inspection

$1,715

Industry Avg / Inspection

$6,093

What this shows 2 inspections over 1 year, averaging 16.0 violations per visit. That's $1,715 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

23

Serious

71.9% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

9

Other-Than-Serious

28.1% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$4,900

Current Penalty Amount

$3,430

Penalty Reduction

30.0%

What this shows Penalties were reduced by $1,470 from the initial assessment of $4,900. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How McAd INC. DBA Carolina Custom Surfaces compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric McAd INC. DBA Carolina Custom Surfaces Industry Avg
Inspections 2 2.6
Violations 32 8.0
Total Penalty $3,430 $15,763
Avg Penalty per Inspection $1,715 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for McAd INC. DBA Carolina Custom Surfaces, both outside NC so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($3,430 here).

Winston Hardwood, INC. $3,430 AL Colledgewood INC $3,430 CA Goldstone Land Company INC. DBA Bear Creek Winery $3,430 CA J & J Technologies, INC. $3,430 MA

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (2 inspections here).

Silver Bay Seafoods, LLC 2 insp. False Pass, AK Precision Build Solutions, LLC 2 insp. Tampa, FL Carmen Creative Cabinet, L.L.C. 2 insp. Belton, TX Meglio Interiors, LLC 2 insp. Chamblee, GA

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Winston Hardwood, INC.
Double Springs, AL
2 inspections $3,430
Colledgewood INC
Lincoln, CA
2 inspections $3,430
Goldstone Land Company INC. DBA Bear Creek Winery
Lodi, CA
2 inspections $3,430
J & J Technologies, INC.
Wareham, MA
2 inspections $3,430
Industrial Maintenance, INC.
Wichita, KS
2 inspections $3,430

Compare McAd INC. DBA Carolina Custom Surfaces vs Winston Hardwood, INC. side-by-side →

What to do with this record

Use McAd INC. DBA Carolina Custom Surfaces's enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare McAd INC. DBA Carolina Custom Surfaces against Winston Hardwood, INC., a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether McAd INC. DBA Carolina Custom Surfaces's inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is McAd INC. DBA Carolina Custom Surfaces safe to work at? ▼
Based on OSHA records, McAd INC. DBA Carolina Custom Surfaces's workplace safety record is concerning, with multiple serious compliance issues. The employer has 32 violations across 2 inspections, including 23 serious violations. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does McAd INC. DBA Carolina Custom Surfaces have? ▼
McAd INC. DBA Carolina Custom Surfaces has 32 OSHA violations on record, including 23 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $3,430.
How many OSHA inspections has McAd INC. DBA Carolina Custom Surfaces had? ▼
McAd INC. DBA Carolina Custom Surfaces has had 2 OSHA inspections, with the first recorded on 2011-02-09 and the most recent on 2011-06-22. This averages 16.0 violations per inspection.
What is the total penalty amount for McAd INC. DBA Carolina Custom Surfaces? ▼
McAd INC. DBA Carolina Custom Surfaces has been assessed $3,430 in current OSHA penalties, reduced from an initial assessment of $4,900 (a 30.0% reduction).
Does McAd INC. DBA Carolina Custom Surfaces have any serious or willful violations? ▼
Yes. McAd INC. DBA Carolina Custom Surfaces has 23 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does McAd INC. DBA Carolina Custom Surfaces operate in? ▼
McAd INC. DBA Carolina Custom Surfaces operates in the Manufacturing sector (NAICS code 327991). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does McAd INC. DBA Carolina Custom Surfaces rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, McAd INC. DBA Carolina Custom Surfaces ranks #65,279 (the lower half of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does McAd INC. DBA Carolina Custom Surfaces's safety record compare to industry average? ▼
McAd INC. DBA Carolina Custom Surfaces's total OSHA penalty of $3,430 is below the Manufacturing industry average of $15,763 per employer. The employer has 2 inspections compared to the industry average of 2.6 per employer. For a direct comparison, J & J Technologies, INC. in Wareham, MA is a similar manufacturing employer with $3,430 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 2 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.