PlainWorker
Employers › CA

Manufacturing · San Jose, CA

Maxim Integrated Products

According to OSHA enforcement records (2010–2026), Maxim Integrated Products has a relatively clean safety record: 2 violations across 2 inspections. See the full breakdown below.

Lower half by penalty0% serious
$1,625
OSHA penalties
2
Violations cited
2
OSHA inspections
#80,809
of 100,495 penalized employers

Maxim Integrated Products in San Jose, CA has been the subject of 2 OSHA workplace inspections and 2 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $1,625. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Maxim Integrated Products 2 times over 1 year - more than twice a year on average. These inspections resulted in 2 violations, averaging 1.0 per inspection. Its total OSHA penalty ranks in the lower half of penalized employers nationally. Against the Manufacturing industry average of 3 inspections per employer, this runs moderately below peers (0.8x the sector average) on inspection frequency. For comparison, Ultradent Products, INC. in South Jordan, UT is another manufacturing employer with 4 OSHA inspections on record and $1,625 in current penalties.

1.0
violations per inspection
0.0%
of violations were serious
20%
of penalized employers rank lower

How Maxim Integrated Products compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Maxim Integrated Products runs well below peers (0.11x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$1,625 Top 20% most affordable more affordable than 80% of 100,495 U.S. employers with a penalty

$0–$5,000: 44,435 U.S. employers with a penalty (44%). This entry sits in this band. $5,000–$10,000: 20,628 U.S. employers with a penalty (21%). Above this entry. $10,000–$15,000: 11,165 U.S. employers with a penalty (11%). Above this entry. $15,000–$20,000: 6,629 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,205 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,885 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,052 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,483 U.S. employers with a penalty (1%). Above this entry. $40,000–$45,000: 1,120 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 792 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,101 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

What the Data Says About Maxim Integrated Products

The federal enforcement record for Maxim Integrated Products in San Jose, CA includes 2 OSHA inspections and 2 violations, translating to 1.00 violations per inspection. Of those violations, 0 (0.0%) were classified as serious, 0 (0.0%) as willful, and 0 (0.0%) as repeat.

OSHA assessed $1,625 in initial penalties against this employer, later adjusted to a current total of $1,625 - no reduction from the original assessment. Average penalty per inspection works out to $813. Against the Manufacturing industry average of $15,410 per employer, this record runs well below peers (0.11x the sector average).

Inspection activity spans from 2012-03-30 to 2013-04-11, a window of roughly 1 year.

Enforcement detail

OSHA Inspection History

Total Inspections

2

First Inspection

2012-03-30

Last Inspection

2013-04-11

Inspection Span

1 yr

Violations / Inspection

1.0

Avg Penalty / Inspection

$813

Industry Avg / Inspection

$6,092

What this shows 2 inspections over 1 year, averaging 1.0 violations per visit. That's $813 per inspection vs. the Manufacturing average of $6,092.

Enforcement detail

Violation Breakdown

0

Serious

0.0% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

2

Other-Than-Serious

100.0% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$1,625

Current Penalty Amount

$1,625

Penalty Reduction

None

What this shows No reduction on record. The current penalty matches the original OSHA assessment.

Industry Safety Context: Manufacturing

How Maxim Integrated Products compares to the Manufacturing sector, which has 45,665 employers tracked by PlainWorker.

Metric Maxim Integrated Products Industry Avg
Inspections 2 2.5
Violations 2 7.8
Total Penalty $1,625 $15,410
Avg Penalty per Inspection $813 $6,092
View all 45,665 employers in Manufacturing →

Nearby & Similar Employers in Manufacturing

Midwest Steel Rule Cutting Die, INC.
Indianapolis, IN
2 inspections $1,625
Aeroflex USA, INC.
Sweetwater, TN
2 inspections $1,625
Ultradent Products, INC.
South Jordan, UT
4 inspections $1,625
Smithfield Foods Sioux City-Curly's
Sioux City, IA
2 inspections $1,625
Cargill Incorporated
Cedar Rapids, IA
2 inspections $1,625

Compare Maxim Integrated Products vs Midwest Steel Rule Cutting Die, INC. side-by-side →

Frequently Asked Questions

Is Maxim Integrated Products safe to work at? ▼
Based on OSHA records, Maxim Integrated Products's workplace safety record is relatively clean, with fewer violations than typical. The employer has 2 violations across 2 inspections. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does Maxim Integrated Products have? ▼
Maxim Integrated Products has 2 OSHA violations on record, including 0 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $1,625.
How many OSHA inspections has Maxim Integrated Products had? ▼
Maxim Integrated Products has had 2 OSHA inspections, with the first recorded on 2012-03-30 and the most recent on 2013-04-11. This averages 1.0 violations per inspection.
What is the total penalty amount for Maxim Integrated Products? ▼
Maxim Integrated Products has been assessed $1,625 in current OSHA penalties.
What industry does Maxim Integrated Products operate in? ▼
Maxim Integrated Products operates in the Manufacturing sector (NAICS code 334413). This industry has 45,665 employers tracked by PlainWorker, with 115,522 total OSHA inspections and $703.72M in cumulative penalties.
How does Maxim Integrated Products's safety record compare to industry average? ▼
Maxim Integrated Products's total OSHA penalty of $1,625 is below the Manufacturing industry average of $15,410 per employer. The employer has 2 inspections compared to the industry average of 2.5 per employer. For a direct comparison, Ultradent Products, INC. in South Jordan, UT is a similar manufacturing employer with $1,625 in current penalties.

Explore PlainWorker

Manufacturing Industry

All 45,665 employers in this sector
Employers in CA

All inspected employers in this state
Safety Rankings

Most penalized, repeat violators & more

What to check next

Maxim Integrated Products's record is one establishment in a larger pattern. Use it as a research checklist, not a verdict on the employer overall.

These figures are the federal enforcement record on file and reflect past inspections, not a statement about current workplace conditions. See the disclaimer for how to read them.

Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 2 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.