PlainWorker
Employers › MI

Manufacturing · Greenville, MI

Master Precision Global LLC

According to OSHA enforcement records (2010–2026), Master Precision Global LLC ranks #93,673 of 99,447 penalized U.S. employers by total current penalty, with a average safety record: 3 violations across 2 inspections.

Lower half by penalty67% serious
$440
OSHA penalties
3
Violations cited
2
OSHA inspections
#93,673
of 99,447 penalized employers

Master Precision Global LLC in Greenville, MI has been the subject of 2 OSHA workplace inspections and 3 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $440. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Master Precision Global LLC 2 times over 3 years, roughly once every couple of years. These inspections resulted in 3 violations, averaging 1.5 per inspection. According to OSHA enforcement records, its total current penalty ranks #93,673 of 99,447 penalized U.S. employers (the lower half of penalized employers nationally). Of these, 2 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs moderately below peers (0.8x the sector average) on inspection frequency. For comparison, Bell Marine INC in Clackamas, OR is another manufacturing employer with 2 OSHA inspections on record and $440 in current penalties.

1.5
violations per inspection
66.7%
of violations were serious
#93,673
of 99,447 penalized employers

Compliance score

C 68/100
  • C OSHA safety compliance: 3 violations across 2 OSHA inspections (1.5 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How Master Precision Global LLC compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Master Precision Global LLC runs well below peers (0.03x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$440 Top 6% most affordable more affordable than 94% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). This entry sits in this band. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Above this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Above this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Master Precision Global LLC.

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both1.92.022.02.00.87.614.521.428.3OSHA inspectionsViolations citedSIMTEK INC., OSHA inspections: 2 · Violations cited: 25ACTION ENGINEERING, …, OSHA inspections: 2 · Violations cited: 27AMPAC MOBILE HOLDING…, OSHA inspections: 2 · Violations cited: 2GALPERTI INC., OSHA inspections: 2 · Violations cited: 12MERCURY PAPER, INC., OSHA inspections: 2 · Violations cited: 14ATG SUPPLY INC., OSHA inspections: 2 · Violations cited: 3BORAL CONCRETE PRODU…, OSHA inspections: 2 · Violations cited: 9ARPS DAIRY, INC., OSHA inspections: 2 · Violations cited: 10SABIC INNOVATIVE PLA…, OSHA inspections: 2 · Violations cited: 5PLASTIC TECHNOLOGIES…, OSHA inspections: 2 · Violations cited: 12SCHULT INDUSTRIES, OSHA inspections: 2 · Violations cited: 8WOOSTER PRODUCTS INC., OSHA inspections: 2 · Violations cited: 7PAK-LITE, INC., OSHA inspections: 2 · Violations cited: 7ALL AMERICAN SPACE S…, OSHA inspections: 2 · Violations cited: 13GAMMA AEROSPACE, OSHA inspections: 2 · Violations cited: 13AZTECA BAKERY LLC, OSHA inspections: 2 · Violations cited: 6AMERICAN PUZZLE COMP…, OSHA inspections: 2 · Violations cited: 5FIN PAN, INC., OSHA inspections: 2 · Violations cited: 10VAL TECH HOLDINGS, I…, OSHA inspections: 2 · Violations cited: 10WATSON MCDANIEL COMP…, OSHA inspections: 2 · Violations cited: 11Master Precision Glo…, OSHA inspections: 2 · Violations cited: 3
Master Precision Global LLC has 2 OSHA inspections on record and 3 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Master Precision Global LLC in the Manufacturing enforcement ledger

Manufacturing sector: Master Precision Global LLC is the #34,081 heaviest OSHA penalty carrier of 35,243 employers with nonzero fines ($440).

How Master Precision Global LLC Compares

Master Precision Global LLC's 1.50 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs well below peers (0.03x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

2

First Inspection

2010-03-17

Last Inspection

2013-02-07

Inspection Span

3 yrs

Violations / Inspection

1.5

Avg Penalty / Inspection

$220

Industry Avg / Inspection

$6,093

What this shows 2 inspections over 3 years, averaging 1.5 violations per visit. That's $220 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

2

Serious

66.7% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

1

Other-Than-Serious

33.3% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$1,100

Current Penalty Amount

$440

Penalty Reduction

60.0%

What this shows Penalties were reduced by $660 from the initial assessment of $1,100. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Master Precision Global LLC compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Master Precision Global LLC Industry Avg
Inspections 2 2.6
Violations 3 8.0
Total Penalty $440 $15,763
Avg Penalty per Inspection $220 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Master Precision Global LLC, both outside MI so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($440 here).

Thain Boats $440 WA Northwest Processing $440 WA CVG Oregon LLC $440 OR Bell Marine INC $440 OR

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (2 inspections here).

Simtek INC. 2 insp. Amityville, NY Action Engineering, INC. 2 insp. Tucker, GA Ampac Mobile Holdings LLC 2 insp. Mobile, AL Galperti INC. 2 insp. Houston, TX

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Thain Boats
Arlington, WA
3 inspections $440
Northwest Processing
Olympia, WA
3 inspections $440
CVG Oregon LLC
Tigard, OR
3 inspections $440
Bell Marine INC
Clackamas, OR
2 inspections $440
Master Machine INC
Eugene, OR
2 inspections $440

Compare Master Precision Global LLC vs Thain Boats side-by-side →

What to do with this record

Use Master Precision Global LLC's enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Master Precision Global LLC against Thain Boats, a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Master Precision Global LLC's inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Master Precision Global LLC safe to work at? ▼
Based on OSHA records, Master Precision Global LLC's workplace safety record is average, with typical for this industry. The employer has 3 violations across 2 inspections, including 2 serious violations. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does Master Precision Global LLC have? ▼
Master Precision Global LLC has 3 OSHA violations on record, including 2 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $440.
How many OSHA inspections has Master Precision Global LLC had? ▼
Master Precision Global LLC has had 2 OSHA inspections, with the first recorded on 2010-03-17 and the most recent on 2013-02-07. This averages 1.5 violations per inspection.
What is the total penalty amount for Master Precision Global LLC? ▼
Master Precision Global LLC has been assessed $440 in current OSHA penalties, reduced from an initial assessment of $1,100 (a 60.0% reduction).
Does Master Precision Global LLC have any serious or willful violations? ▼
Yes. Master Precision Global LLC has 2 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Master Precision Global LLC operate in? ▼
Master Precision Global LLC operates in the Manufacturing sector (NAICS code 326130). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Master Precision Global LLC rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Master Precision Global LLC ranks #93,673 (the lower half of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Master Precision Global LLC's safety record compare to industry average? ▼
Master Precision Global LLC's total OSHA penalty of $440 is below the Manufacturing industry average of $15,763 per employer. The employer has 2 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Bell Marine INC in Clackamas, OR is a similar manufacturing employer with $440 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 2 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.