PlainWorker
Employers › PA

Manufacturing · Pottstown, PA

Mario Dinardo JR. Custom Woodworking, INC.

According to OSHA enforcement records (2010–2026), Mario Dinardo JR. Custom Woodworking, INC. ranks #52,891 of 99,447 penalized U.S. employers by total current penalty, with a concerning safety record: 8 violations across 4 inspections.

Lower half by penalty50% serious
$5,446
OSHA penalties
8
Violations cited
4
OSHA inspections
#52,891
of 99,447 penalized employers

Mario Dinardo JR. Custom Woodworking, INC. in Pottstown, PA has been the subject of 4 OSHA workplace inspections and 8 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $5,446. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Mario Dinardo JR. Custom Woodworking, INC. 4 times over 5 years, roughly once every couple of years. These inspections resulted in 8 violations, averaging 2.0 per inspection, above what's typical for a single visit. According to OSHA enforcement records, its total current penalty ranks #52,891 of 99,447 penalized U.S. employers (the lower half of penalized employers nationally). Of these, 4 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs moderately above peers (1.5x the sector average) on inspection frequency. For comparison, Dura-Lite Aluminum Products INC. in Lafayette, LA is another manufacturing employer with 2 OSHA inspections on record and $5,446 in current penalties.

2.0
violations per inspection
50.0%
of violations were serious
#52,891
of 99,447 penalized employers

Compliance score

D 61/100
  • D OSHA safety compliance: 8 violations across 4 OSHA inspections (2.0 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How this employer compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Mario Dinardo JR. Custom Woodworking, INC. runs moderately below peers (0.3x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$5,446 Top 47% most affordable more affordable than 53% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). This entry sits in this band. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Above this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Mario Dinardo JR. Custom Woodworking, INC..

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both4.04.044.04.006.312.618.925.1OSHA inspectionsViolations citedNHVS International, …, OSHA inspections: 4 · Violations cited: 10AMCOR, INC., OSHA inspections: 4 · Violations cited: 21IDAHO PACIFIC COLORA…, OSHA inspections: 4 · Violations cited: 10DELTECH RESIN COMPANY, OSHA inspections: 4 · Violations cited: 9BUITONI FOOD COMPANY, OSHA inspections: 4 · Violations cited: 5WAYNE PALLETS, INC., OSHA inspections: 4 · Violations cited: 23FORD MOTOR COMPANY, OSHA inspections: 4 · Violations cited: 6PVS CHEMICALS, INC., OSHA inspections: 4 · Violations cited: 3STONE WAREHOUSE OF M…, OSHA inspections: 4 · Violations cited: 24MARSAM METAL FINISHI…, OSHA inspections: 4 · Violations cited: 8HEMCO CORPORATION, OSHA inspections: 4 · Violations cited: 13SJA, INC., OSHA inspections: 4 · Violations cited: 19UNITED LABORATORIES …, OSHA inspections: 4 · Violations cited: 3CENTRAL ALABAMA WOOD…, OSHA inspections: 4 · Violations cited: 11BORDEN DAIRY COMPANY…, OSHA inspections: 4 · Violations cited: 8VALLEY PROTEINS, INC., OSHA inspections: 4 · Violations cited: 18NOW HEALTH GROUP, INC, OSHA inspections: 4 · Violations cited: 4JOSEPH P. CARRARA & …, OSHA inspections: 4 · Violations cited: 15SENSIENT FLAVORS LLC, OSHA inspections: 4 · Violations cited: 1MARINE REPAIR & MAIN…, OSHA inspections: 4 · Violations cited: 7Mario Dinardo JR. Cu…, OSHA inspections: 4 · Violations cited: 8
Mario Dinardo JR. Custom Woodworking, INC. has 4 OSHA inspections on record and 8 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Mario Dinardo JR. Custom Woodworking, INC. in the Manufacturing enforcement ledger

Among 35,243 Manufacturing employers with OSHA penalties on file, Mario Dinardo JR. Custom Woodworking, INC. ranks #22,258 at $5,446 current penalty.

How Mario Dinardo JR. Custom Woodworking, INC. Compares

Mario Dinardo JR. Custom Woodworking, INC.'s 2.00 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs moderately below peers (0.3x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

4

First Inspection

2011-10-06

Last Inspection

2016-06-07

Inspection Span

5 yrs

Violations / Inspection

2.0

Avg Penalty / Inspection

$1,362

Industry Avg / Inspection

$6,093

What this shows 4 inspections over 5 years, averaging 2.0 violations per visit. That's $1,362 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

4

Serious

50.0% of total

0

Willful

0.0% of total

1

Repeat

12.5% of total

3

Other-Than-Serious

37.5% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$7,780

Current Penalty Amount

$5,446

Penalty Reduction

30.0%

What this shows Penalties were reduced by $2,334 from the initial assessment of $7,780. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Mario Dinardo JR. Custom Woodworking, INC. compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Mario Dinardo JR. Custom Woodworking, INC. Industry Avg
Inspections 4 2.6
Violations 8 8.0
Total Penalty $5,446 $15,763
Avg Penalty per Inspection $1,362 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Mario Dinardo JR. Custom Woodworking, INC., both outside PA so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($5,446 here).

G-Form, LLC $5,446 RI Energy Sciences, INC. $5,446 MA Dura-Lite Aluminum Products INC. $5,446 LA Customed, INC. $5,445 PR

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (4 inspections here).

NHVS International, Inc. 4 insp. Mentor, OH Amcor, INC. 4 insp. Thomson, GA Idaho Pacific Colorado Corporation 4 insp. Center, CO Deltech Resin Company 4 insp. Newark, NJ

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

G-Form, LLC
North Smithfield, RI
2 inspections $5,446
Energy Sciences, INC.
Wilmington, MA
3 inspections $5,446
Dura-Lite Aluminum Products INC.
Lafayette, LA
2 inspections $5,446
Customed, INC.
Fajardo, PR
2 inspections $5,445
Wardley Industrial INC.
Stockton, CA
2 inspections $5,445

Compare Mario Dinardo JR. Custom Woodworking, INC. vs G-Form, LLC side-by-side →

What to do with this record

Use Mario Dinardo JR. Custom Woodworking, INC.'s enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Mario Dinardo JR. Custom Woodworking, INC. against G-Form, LLC, a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Mario Dinardo JR. Custom Woodworking, INC.'s inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Mario Dinardo JR. Custom Woodworking, INC. safe to work at? ▼
Based on OSHA records, Mario Dinardo JR. Custom Woodworking, INC.'s workplace safety record is concerning, with multiple serious compliance issues. The employer has 8 violations across 4 inspections, including 4 serious violations. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does Mario Dinardo JR. Custom Woodworking, INC. have? ▼
Mario Dinardo JR. Custom Woodworking, INC. has 8 OSHA violations on record, including 4 serious, 0 willful, and 1 repeat violations. The total current penalty amount is $5,446.
How many OSHA inspections has Mario Dinardo JR. Custom Woodworking, INC. had? ▼
Mario Dinardo JR. Custom Woodworking, INC. has had 4 OSHA inspections, with the first recorded on 2011-10-06 and the most recent on 2016-06-07. This averages 2.0 violations per inspection.
What is the total penalty amount for Mario Dinardo JR. Custom Woodworking, INC.? ▼
Mario Dinardo JR. Custom Woodworking, INC. has been assessed $5,446 in current OSHA penalties, reduced from an initial assessment of $7,780 (a 30.0% reduction).
Does Mario Dinardo JR. Custom Woodworking, INC. have any serious or willful violations? ▼
Yes. Mario Dinardo JR. Custom Woodworking, INC. has 4 serious violations, and 1 repeat violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Mario Dinardo JR. Custom Woodworking, INC. operate in? ▼
Mario Dinardo JR. Custom Woodworking, INC. operates in the Manufacturing sector (NAICS code 321918). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Mario Dinardo JR. Custom Woodworking, INC. rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Mario Dinardo JR. Custom Woodworking, INC. ranks #52,891 (the lower half of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Mario Dinardo JR. Custom Woodworking, INC.'s safety record compare to industry average? ▼
Mario Dinardo JR. Custom Woodworking, INC.'s total OSHA penalty of $5,446 is below the Manufacturing industry average of $15,763 per employer. The employer has 4 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Dura-Lite Aluminum Products INC. in Lafayette, LA is a similar manufacturing employer with $5,446 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 4 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.