PlainWorker
Employers › MI

Manufacturing · Clinton Township, MI

LTC Roll & Engineering

According to OSHA enforcement records (2010–2026), LTC Roll & Engineering has a concerning safety record: 12 violations across 7 inspections. See the full breakdown below.

Top 25% by penalty67% serious
$14,800
OSHA penalties
12
Violations cited
7
OSHA inspections
#24,591
of 100,495 penalized employers

LTC Roll & Engineering in Clinton Township, MI has been the subject of 7 OSHA workplace inspections and 12 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $14,800. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected LTC Roll & Engineering 7 times over 8 years, roughly once every couple of years. These inspections resulted in 12 violations, averaging 1.7 per inspection. Its total OSHA penalty ranks in the top quarter of penalized employers nationally. Of these, 8 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs well above peers (2.8x the sector average) on inspection frequency. For comparison, Magnesium Products of America in Eaton Rapids, MI is another manufacturing employer with 5 OSHA inspections on record and $14,800 in current penalties.

1.7
violations per inspection
66.7%
of violations were serious
76%
of penalized employers rank lower

How LTC Roll & Engineering compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows LTC Roll & Engineering sits roughly in line with peers (1.0x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$14,800 Bottom 24% least affordable more affordable than 24% of 100,495 U.S. employers with a penalty

$0–$5,000: 44,435 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,628 U.S. employers with a penalty (21%). Below this entry. $10,000–$15,000: 11,165 U.S. employers with a penalty (11%). This entry sits in this band. $15,000–$20,000: 6,629 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,205 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,885 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,052 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,483 U.S. employers with a penalty (1%). Above this entry. $40,000–$45,000: 1,120 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 792 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,101 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

What the Data Says About LTC Roll & Engineering

The federal enforcement record for LTC Roll & Engineering in Clinton Township, MI includes 7 OSHA inspections and 12 violations, translating to 1.71 violations per inspection. Of those violations, 8 (66.7%) were classified as serious, 0 (0.0%) as willful, and 1 (8.3%) as repeat. Serious violations denote hazards likely to cause death or serious physical harm; willful and repeat categories indicate intentional disregard or recurrence of previously cited hazards.

OSHA assessed $29,600 in initial penalties against this employer, later adjusted to a current total of $14,800 - a 50.0% reduction. Average penalty per inspection works out to $2,114. Against the Manufacturing industry average of $15,410 per employer, this record sits roughly in line with peers (1.0x the sector average).

Inspection activity spans from 2016-03-30 to 2024-01-09, a window of roughly 8 years.

Enforcement detail

OSHA Inspection History

Total Inspections

7

First Inspection

2016-03-30

Last Inspection

2024-01-09

Inspection Span

8 yrs

Violations / Inspection

1.7

Avg Penalty / Inspection

$2,114

Industry Avg / Inspection

$6,092

What this shows 7 inspections over 8 years, averaging 1.7 violations per visit. That's $2,114 per inspection vs. the Manufacturing average of $6,092.

Enforcement detail

Violation Breakdown

8

Serious

66.7% of total

0

Willful

0.0% of total

1

Repeat

8.3% of total

3

Other-Than-Serious

25.0% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$29,600

Current Penalty Amount

$14,800

Penalty Reduction

50.0%

What this shows Penalties were reduced by $14,800 from the initial assessment of $29,600. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How LTC Roll & Engineering compares to the Manufacturing sector, which has 45,665 employers tracked by PlainWorker.

Metric LTC Roll & Engineering Industry Avg
Inspections 7 2.5
Violations 12 7.8
Total Penalty $14,800 $15,410
Avg Penalty per Inspection $2,114 $6,092
View all 45,665 employers in Manufacturing →

Nearby & Similar Employers in Manufacturing

Kaiser Aluminum
Kalamazoo, MI
4 inspections $14,800
G & a Baking Company LLC DBA Michigan Bread
Taylor, MI
3 inspections $14,800
Valley Pallet, INC.
Sacramento, CA
2 inspections $14,800
Magnesium Products of America
Eaton Rapids, MI
5 inspections $14,800
Centro, INC.
Horicon, WI
4 inspections $14,800

Compare LTC Roll & Engineering vs Kaiser Aluminum side-by-side →

Frequently Asked Questions

Is LTC Roll & Engineering safe to work at? ▼
Based on OSHA records, LTC Roll & Engineering's workplace safety record is concerning, with multiple serious compliance issues. The employer has 12 violations across 7 inspections, including 8 serious violations. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does LTC Roll & Engineering have? ▼
LTC Roll & Engineering has 12 OSHA violations on record, including 8 serious, 0 willful, and 1 repeat violations. The total current penalty amount is $14,800.
How many OSHA inspections has LTC Roll & Engineering had? ▼
LTC Roll & Engineering has had 7 OSHA inspections, with the first recorded on 2016-03-30 and the most recent on 2024-01-09. This averages 1.7 violations per inspection.
What is the total penalty amount for LTC Roll & Engineering? ▼
LTC Roll & Engineering has been assessed $14,800 in current OSHA penalties, reduced from an initial assessment of $29,600 (a 50.0% reduction).
Does LTC Roll & Engineering have any serious or willful violations? ▼
Yes. LTC Roll & Engineering has 8 serious violations, and 1 repeat violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does LTC Roll & Engineering operate in? ▼
LTC Roll & Engineering operates in the Manufacturing sector (NAICS code 332114). This industry has 45,665 employers tracked by PlainWorker, with 115,522 total OSHA inspections and $703.72M in cumulative penalties.
How does LTC Roll & Engineering's safety record compare to industry average? ▼
LTC Roll & Engineering's total OSHA penalty of $14,800 is below the Manufacturing industry average of $15,410 per employer. The employer has 7 inspections compared to the industry average of 2.5 per employer. For a direct comparison, Magnesium Products of America in Eaton Rapids, MI is a similar manufacturing employer with $14,800 in current penalties.

Explore PlainWorker

Manufacturing Industry

All 45,665 employers in this sector
Employers in MI

All inspected employers in this state
Safety Rankings

Most penalized, repeat violators & more

What to check next

LTC Roll & Engineering's record is one establishment in a larger pattern. Use it as a research checklist, not a verdict on the employer overall.

These figures are the federal enforcement record on file and reflect past inspections, not a statement about current workplace conditions. See the disclaimer for how to read them.

Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 7 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.