PlainWorker
Employers › MI

Manufacturing · Saint Joseph, MI

Liberty 3d Technologies

According to OSHA enforcement records (2010–2026), Liberty 3d Technologies ranks #66,148 of 99,447 penalized U.S. employers by total current penalty, with a concerning safety record: 7 violations across 2 inspections.

Lower half by penalty100% serious
$3,300
OSHA penalties
7
Violations cited
2
OSHA inspections
#66,148
of 99,447 penalized employers

Liberty 3d Technologies in Saint Joseph, MI has been the subject of 2 OSHA workplace inspections and 7 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $3,300. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Liberty 3d Technologies 2 times across a longer 6-year span, an infrequent cadence. These inspections resulted in 7 violations, averaging 3.5 per inspection, above what's typical for a single visit. According to OSHA enforcement records, its total current penalty ranks #66,148 of 99,447 penalized U.S. employers (the lower half of penalized employers nationally). Of these, 7 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs moderately below peers (0.8x the sector average) on inspection frequency. For comparison, Mirage Manufacturing, INC. in Gainesville, FL is another manufacturing employer with 3 OSHA inspections on record and $3,300 in current penalties.

3.5
violations per inspection
100.0%
of violations were serious
#66,148
of 99,447 penalized employers

Compliance score

F 39/100
  • F OSHA safety compliance: 7 violations across 2 OSHA inspections (3.5 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How Liberty 3d Technologies compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Liberty 3d Technologies runs well below peers (0.21x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$3,300 Top 33% most affordable more affordable than 67% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). This entry sits in this band. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Above this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Above this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Liberty 3d Technologies.

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both1.92.022.02.0011.322.533.845.0OSHA inspectionsViolations citedAMERICAN RECYCLING &…, OSHA inspections: 2 · Violations cited: 22ROYAL CARIBBEAN JAMA…, OSHA inspections: 2 · Violations cited: 10FOAM DISTRIBUTORS, INC, OSHA inspections: 2 · Violations cited: 18LAMB BROTHERS LUMBER…, OSHA inspections: 2 · Violations cited: 43CALIFORNIA CUSTOM FR…, OSHA inspections: 2 · Violations cited: 10UNITED STATES PIPE &…, OSHA inspections: 2 · Violations cited: 2TALLAHATCHIE LUMBER,…, OSHA inspections: 2 · Violations cited: 39POLYMER ADDITIVES, OSHA inspections: 2 · Violations cited: 4POLYMAX THERMOPLASTI…, OSHA inspections: 2 · Violations cited: 7AMERICARB, OSHA inspections: 2 · Violations cited: 9ADVANCED GRAPHITE PO…, OSHA inspections: 2 · Violations cited: 11PRECISION HOSE, INC., OSHA inspections: 2 · Violations cited: 14KONSEI USA, INC., OSHA inspections: 2 · Violations cited: 11TIMBER TECHNOLOGIES,…, OSHA inspections: 2 · Violations cited: 12NATIONAL PIPE AND PL…, OSHA inspections: 2 · Violations cited: 20ACASS SYSTEMS, LLC, OSHA inspections: 2 · Violations cited: 9GENEST CONCRETE WORK…, OSHA inspections: 2 · Violations cited: 7D&R SIGNS, LLC, OSHA inspections: 2 · Violations cited: 16YC52 LLC, OSHA inspections: 2 · Violations cited: 31ADM MILLING CO., OSHA inspections: 2 · Violations cited: 4Liberty 3d Technolog…, OSHA inspections: 2 · Violations cited: 7
Liberty 3d Technologies has 2 OSHA inspections on record and 7 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Liberty 3d Technologies in the Manufacturing enforcement ledger

In Manufacturing, Liberty 3d Technologies sits at penalty rank #26,586 of 35,243 penalized establishments ($3,300 assessed).

How Liberty 3d Technologies Compares

Liberty 3d Technologies's 3.50 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs well below peers (0.21x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

2

First Inspection

2019-11-27

Last Inspection

2025-11-12

Inspection Span

6 yrs

Violations / Inspection

3.5

Avg Penalty / Inspection

$1,650

Industry Avg / Inspection

$6,093

What this shows 2 inspections over 6 years, averaging 3.5 violations per visit. That's $1,650 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

7

Serious

100.0% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

0

Other-Than-Serious

0.0% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$6,600

Current Penalty Amount

$3,300

Penalty Reduction

50.0%

What this shows Penalties were reduced by $3,300 from the initial assessment of $6,600. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Liberty 3d Technologies compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Liberty 3d Technologies Industry Avg
Inspections 2 2.6
Violations 7 8.0
Total Penalty $3,300 $15,763
Avg Penalty per Inspection $1,650 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Liberty 3d Technologies, both outside MI so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($3,300 here).

Calagaz Photo Supply, INC. $3,300 AL Hughes Metal Works, LLC $3,300 NC Western Sugar Cooperative $3,300 MT Cummins Turbo Technologies $3,300 SC

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (2 inspections here).

American Recycling & Manufacturing Company, INC. 2 insp. Rochester, NY Royal Caribbean Jamaican Bakery, INC. 2 insp. Mount Vernon, NY Foam Distributors, INC 2 insp. Hayward, CA Lamb Brothers Lumber Company, INC. 2 insp. Wrens, GA

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Hicks Pallet, INC.
Creola, AL
3 inspections $3,300
Tubeco INC
Warren, MI
2 inspections $3,300
Mirage Manufacturing, INC.
Gainesville, FL
3 inspections $3,300
Milano Bakery and Cafe
Detroit, MI
2 inspections $3,300
Snyder Signs INC
Johnson City, TN
2 inspections $3,300

Compare Liberty 3d Technologies vs Hicks Pallet, INC. side-by-side →

What to do with this record

Use Liberty 3d Technologies's enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Liberty 3d Technologies against Hicks Pallet, INC., a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Liberty 3d Technologies's inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Liberty 3d Technologies safe to work at? ▼
Based on OSHA records, Liberty 3d Technologies's workplace safety record is concerning, with multiple serious compliance issues. The employer has 7 violations across 2 inspections, including 7 serious violations. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does Liberty 3d Technologies have? ▼
Liberty 3d Technologies has 7 OSHA violations on record, including 7 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $3,300.
How many OSHA inspections has Liberty 3d Technologies had? ▼
Liberty 3d Technologies has had 2 OSHA inspections, with the first recorded on 2019-11-27 and the most recent on 2025-11-12. This averages 3.5 violations per inspection.
What is the total penalty amount for Liberty 3d Technologies? ▼
Liberty 3d Technologies has been assessed $3,300 in current OSHA penalties, reduced from an initial assessment of $6,600 (a 50.0% reduction).
Does Liberty 3d Technologies have any serious or willful violations? ▼
Yes. Liberty 3d Technologies has 7 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Liberty 3d Technologies operate in? ▼
Liberty 3d Technologies operates in the Manufacturing sector (NAICS code 332322). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Liberty 3d Technologies rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Liberty 3d Technologies ranks #66,148 (the lower half of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Liberty 3d Technologies's safety record compare to industry average? ▼
Liberty 3d Technologies's total OSHA penalty of $3,300 is below the Manufacturing industry average of $15,763 per employer. The employer has 2 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Mirage Manufacturing, INC. in Gainesville, FL is a similar manufacturing employer with $3,300 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 2 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.