PlainWorker
Employers › NY

Manufacturing · Rochester, NY

Lexington Machining LLC.

According to OSHA enforcement records (2010–2026), Lexington Machining LLC. ranks #25,255 of 99,447 penalized U.S. employers by total current penalty, with a concerning safety record: 8 violations across 2 inspections.

Top 25% by penalty88% serious
$14,344
OSHA penalties
8
Violations cited
2
OSHA inspections
#25,255
of 99,447 penalized employers

Lexington Machining LLC. in Rochester, NY has been the subject of 2 OSHA workplace inspections and 8 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $14,344. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Lexington Machining LLC. 2 times over 1 year - more than twice a year on average. These inspections resulted in 8 violations, averaging 4.0 per inspection, above what's typical for a single visit. According to OSHA enforcement records, its total current penalty ranks #25,255 of 99,447 penalized U.S. employers (the top quarter of penalized employers nationally). Of these, 7 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs moderately below peers (0.8x the sector average) on inspection frequency. For comparison, Techmetals, INC. in Dayton, OH is another manufacturing employer with 3 OSHA inspections on record and $14,342 in current penalties.

4.0
violations per inspection
87.5%
of violations were serious
#25,255
of 99,447 penalized employers

Compliance score

F 32/100
  • F OSHA safety compliance: 8 violations across 2 OSHA inspections (4.0 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How Lexington Machining LLC. compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Lexington Machining LLC. sits roughly in line with peers (0.9x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$14,344 Bottom 25% least affordable more affordable than 25% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Below this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). This entry sits in this band. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Lexington Machining LLC..

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both1.92.022.02.007.915.723.631.4OSHA inspectionsViolations citedLOUIS DIERZEN, OSHA inspections: 2 · Violations cited: 28DOUBLE R BRAND FOODS…, OSHA inspections: 2 · Violations cited: 30CHRYSLER- KOKOMO CAS…, OSHA inspections: 2 · Violations cited: 7NUTRASTAR INC., OSHA inspections: 2 · Violations cited: 20HEARTHSIDE FOOD SOLU…, OSHA inspections: 2 · Violations cited: 11INDUSTRIAL CONTAINER…, OSHA inspections: 2 · Violations cited: 11SOUTHEAST FOREST PRO…, OSHA inspections: 2 · Violations cited: 17ISCO INDUSTRIES, INC., OSHA inspections: 2 · Violations cited: 2MIDWEST MANUFACTURIN…, OSHA inspections: 2 · Violations cited: 4W.M. SHEPPARD LUMBER…, OSHA inspections: 2 · Violations cited: 16RANDALL MECHANICAL, …, OSHA inspections: 2 · Violations cited: 4MARTIN OPERATING PAR…, OSHA inspections: 2 · Violations cited: 10PROGRESSIVE STAMPING…, OSHA inspections: 2 · Violations cited: 12SUXESS, INC, OSHA inspections: 2 · Violations cited: 19PHILIP MORRIS USA, OSHA inspections: 2 · Violations cited: 1STEVE'S PLATING CORP…, OSHA inspections: 2 · Violations cited: 4ESCOFAB,INC., OSHA inspections: 2 · Violations cited: 16MICOBE, INC., OSHA inspections: 2 · Violations cited: 25FLORIDA TRANSFORMER,…, OSHA inspections: 2 · Violations cited: 5SOUTHWOOD LUMBER AND…, OSHA inspections: 2 · Violations cited: 4Lexington Machining …, OSHA inspections: 2 · Violations cited: 8
Lexington Machining LLC. has 2 OSHA inspections on record and 8 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Lexington Machining LLC. in the Manufacturing enforcement ledger

Manufacturing sector: Lexington Machining LLC. is the #11,877 heaviest OSHA penalty carrier of 35,243 employers with nonzero fines ($14,344).

How Lexington Machining LLC. Compares

Lexington Machining LLC.'s 4.00 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty sits roughly in line with peers (0.9x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

2

First Inspection

2014-10-06

Last Inspection

2015-01-15

Inspection Span

1 yr

Violations / Inspection

4.0

Avg Penalty / Inspection

$7,172

Industry Avg / Inspection

$6,093

What this shows 2 inspections over 1 year, averaging 4.0 violations per visit. That's $7,172 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

7

Serious

87.5% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

1

Other-Than-Serious

12.5% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$19,125

Current Penalty Amount

$14,344

Penalty Reduction

25.0%

What this shows Penalties were reduced by $4,781 from the initial assessment of $19,125. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Lexington Machining LLC. compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Lexington Machining LLC. Industry Avg
Inspections 2 2.6
Violations 8 8.0
Total Penalty $14,344 $15,763
Avg Penalty per Inspection $7,172 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Lexington Machining LLC., both outside NY so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($14,344 here).

Dse Fuzing, LLC $14,346 FL Techmetals, INC. $14,342 OH Fxi, INC. $14,341 PA Ventra Evart LLC $14,340 MI

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (2 inspections here).

Louis Dierzen 2 insp. Newark, IL Double R Brand Foods LLC 2 insp. Lufkin, TX Chrysler- Kokomo Casting Plant 2 insp. Kokomo, IN Nutrastar INC. 2 insp. Farmingdale, NJ

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Dse Fuzing, LLC
Orlando, FL
2 inspections $14,346
Techmetals, INC.
Dayton, OH
3 inspections $14,342
Fxi, INC.
Corry, PA
4 inspections $14,341
Robin K
Los Angeles, CA
0 inspections $0
Ventra Evart LLC
Evart, MI
4 inspections $14,340

Compare Lexington Machining LLC. vs Dse Fuzing, LLC side-by-side →

What to do with this record

Use Lexington Machining LLC.'s enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Lexington Machining LLC. against Dse Fuzing, LLC, a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Lexington Machining LLC.'s inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Lexington Machining LLC. safe to work at? ▼
Based on OSHA records, Lexington Machining LLC.'s workplace safety record is concerning, with multiple serious compliance issues. The employer has 8 violations across 2 inspections, including 7 serious violations. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does Lexington Machining LLC. have? ▼
Lexington Machining LLC. has 8 OSHA violations on record, including 7 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $14,344.
How many OSHA inspections has Lexington Machining LLC. had? ▼
Lexington Machining LLC. has had 2 OSHA inspections, with the first recorded on 2014-10-06 and the most recent on 2015-01-15. This averages 4.0 violations per inspection.
What is the total penalty amount for Lexington Machining LLC.? ▼
Lexington Machining LLC. has been assessed $14,344 in current OSHA penalties, reduced from an initial assessment of $19,125 (a 25.0% reduction).
Does Lexington Machining LLC. have any serious or willful violations? ▼
Yes. Lexington Machining LLC. has 7 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Lexington Machining LLC. operate in? ▼
Lexington Machining LLC. operates in the Manufacturing sector (NAICS code 332710). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Lexington Machining LLC. rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Lexington Machining LLC. ranks #25,255 (the top quarter of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Lexington Machining LLC.'s safety record compare to industry average? ▼
Lexington Machining LLC.'s total OSHA penalty of $14,344 is below the Manufacturing industry average of $15,763 per employer. The employer has 2 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Techmetals, INC. in Dayton, OH is a similar manufacturing employer with $14,342 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 2 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.