Manufacturing · Fayetteville, GA

Lasertech Metal Works, INC.

According to OSHA enforcement records (2010–2026), Lasertech Metal Works, INC. ranks #29,147 of 99,447 penalized U.S. employers by total current penalty, with a concerning safety record: 18 violations across 4 inspections.

Upper half by penalty22% serious

Compiled by Plainworker · September 6, 2026

$12,360
OSHA penalties: 18
Violations cited: 4
OSHA inspections: #29,147
of 99,447 penalized employers

Lasertech Metal Works, INC. in Fayetteville, GA has been the subject of 4 OSHA workplace inspections and 18 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $12,360. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Lasertech Metal Works, INC. 4 times over 7 years, roughly once every couple of years. These inspections resulted in 18 violations, averaging 4.5 per inspection, above what's typical for a single visit. According to OSHA enforcement records, its total current penalty ranks #29,147 of 99,447 penalized U.S. employers (the upper half of penalized employers nationally). Of these, 4 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs moderately above peers (1.5x the sector average) on inspection frequency. For comparison, Fort Mason Machine Company, INC. in Carmichaels, PA is another manufacturing employer with 4 OSHA inspections on record and $12,355 in current penalties.

4.5
violations per inspection: 22.2%
of violations were serious: #29,147
of 99,447 penalized employers

Compliance score

F 25/100

F OSHA safety compliance: 18 violations across 4 OSHA inspections (4.5 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

Lasertech Metal Works,…

$12,360
Manufacturing avg

$15,763

What this shows Lasertech Metal Works, INC. runs moderately below peers (0.8x the sector average) in total OSHA penalties.

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$12,360 Bottom 29% least affordable more affordable than 29% of 99,447 U.S. employers with a penalty

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Lasertech Metal Works, INC..

Lasertech Metal Works, INC. has 4 OSHA inspections on record and 18 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Lasertech Metal Works, INC. in the Manufacturing enforcement ledger

In Manufacturing, Lasertech Metal Works, INC. sits at penalty rank #13,461 of 35,243 penalized establishments ($12,360 assessed).

How Lasertech Metal Works, INC. Compares

Lasertech Metal Works, INC.'s 4.50 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs moderately below peers (0.8x the sector average).

Total Inspections

First Inspection

2012-10-25

Last Inspection

2019-12-17

Inspection Span

7 yrs

Violations / Inspection

4.5

Avg Penalty / Inspection

$3,090

Industry Avg / Inspection

$6,093

What this shows 4 inspections over 7 years, averaging 4.5 violations per visit. That's $3,090 per inspection vs. the Manufacturing average of $6,093.

Serious

22.2% of total

Willful

0.0% of total

Repeat

33.3% of total

Other-Than-Serious

44.4% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Initial Penalty Assessed

$16,514

Current Penalty Amount

$12,360

Penalty Reduction

25.2%

What this shows Penalties were reduced by $4,154 from the initial assessment of $16,514. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Lasertech Metal Works, INC. compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric	Lasertech Metal Works, INC.	Industry Avg
Inspections	4	2.6
Violations	18	8.0
Total Penalty	$12,360	$15,763
Avg Penalty per Inspection	$3,090	$6,093

View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Lasertech Metal Works, INC., both outside GA so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($12,360 here).

Nebraska Beef, LTD. $12,360 NE Fort Mason Machine Company, INC. $12,355 PA Graymills Corporation $12,365 IL Mobile Mark, INC. $12,365 IL

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (4 inspections here).

Screen IT Graphics of Lawrence, INC. 4 insp. Lawrence, KS Pennmark Technologies Corporation 4 insp. Dallas, PA Domtar Paper Company, LLC 4 insp. Johnsonburg, PA Conn-Weld Industries, INC. 4 insp. Princeton, WV

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Nebraska Beef, LTD.

Omaha, NE

2 inspections $12,360

Fort Mason Machine Company, INC.

Carmichaels, PA

4 inspections $12,355

Graymills Corporation

Broadview, IL

2 inspections $12,365

Mobile Mark, INC.

Itasca, IL

2 inspections $12,365

National Hanger Company Incorporated

North Bennington, VT

3 inspections $12,354

Compare Lasertech Metal Works, INC. vs Nebraska Beef, LTD. side-by-side →

What to do with this record

Use Lasertech Metal Works, INC.'s enforcement history as one data point, not the whole picture.

A single employer's record can look unusual in isolation. Compare Lasertech Metal Works, INC. against Nebraska Beef, LTD., a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
See whether Lasertech Metal Works, INC.'s inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Lasertech Metal Works, INC. safe to work at? ▼

Based on OSHA records, Lasertech Metal Works, INC.'s workplace safety record is concerning, with multiple serious compliance issues. The employer has 18 violations across 4 inspections, including 4 serious violations. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.

How many OSHA violations does Lasertech Metal Works, INC. have? ▼

Lasertech Metal Works, INC. has 18 OSHA violations on record, including 4 serious, 0 willful, and 6 repeat violations. The total current penalty amount is $12,360.

How many OSHA inspections has Lasertech Metal Works, INC. had? ▼

Lasertech Metal Works, INC. has had 4 OSHA inspections, with the first recorded on 2012-10-25 and the most recent on 2019-12-17. This averages 4.5 violations per inspection.

What is the total penalty amount for Lasertech Metal Works, INC.? ▼

Lasertech Metal Works, INC. has been assessed $12,360 in current OSHA penalties, reduced from an initial assessment of $16,514 (a 25.2% reduction).

Does Lasertech Metal Works, INC. have any serious or willful violations? ▼

Yes. Lasertech Metal Works, INC. has 4 serious violations, and 6 repeat violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.

What industry does Lasertech Metal Works, INC. operate in? ▼

Lasertech Metal Works, INC. operates in the Manufacturing sector (NAICS code 332312). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.

Where does Lasertech Metal Works, INC. rank nationally on OSHA penalties? ▼

Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Lasertech Metal Works, INC. ranks #29,147 (the upper half of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.

How does Lasertech Metal Works, INC.'s safety record compare to industry average? ▼

Lasertech Metal Works, INC.'s total OSHA penalty of $12,360 is below the Manufacturing industry average of $15,763 per employer. The employer has 4 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Fort Mason Machine Company, INC. in Carmichaels, PA is a similar manufacturing employer with $12,355 in current penalties.

Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.