PlainWorker
Employers › TN

Manufacturing · Greenfield, TN

Keith Tucker DBA Marble Shop

According to OSHA enforcement records (2010–2026), Keith Tucker DBA Marble Shop ranks #82,453 of 99,447 penalized U.S. employers by total current penalty, with a concerning safety record: 15 violations across 2 inspections.

Lower half by penalty53% serious
$1,400
OSHA penalties
15
Violations cited
2
OSHA inspections
#82,453
of 99,447 penalized employers

Keith Tucker DBA Marble Shop in Greenfield, TN has been the subject of 2 OSHA workplace inspections and 15 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $1,400. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Keith Tucker DBA Marble Shop 2 times over 1 year - more than twice a year on average. These inspections resulted in 15 violations, averaging 7.5 per inspection - a notably high rate. According to OSHA enforcement records, its total current penalty ranks #82,453 of 99,447 penalized U.S. employers (the lower half of penalized employers nationally). Of these, 8 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs moderately below peers (0.8x the sector average) on inspection frequency. For comparison, A & F Plating CO., INC. in Providence, RI is another manufacturing employer with 2 OSHA inspections on record and $1,400 in current penalties.

7.5
violations per inspection
53.3%
of violations were serious
#82,453
of 99,447 penalized employers

Compliance score

F 0/100
  • F OSHA safety compliance: 15 violations across 2 OSHA inspections (7.5 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How Keith Tucker DBA Marble Shop compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Keith Tucker DBA Marble Shop runs well below peers (0.09x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$1,400 Top 17% most affordable more affordable than 83% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). This entry sits in this band. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Above this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Above this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Keith Tucker DBA Marble Shop.

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both1.92.022.02.00.49.21826.835.6OSHA inspectionsViolations citedCUSTOM RUBBER PRODUCTS, OSHA inspections: 2 · Violations cited: 9WHITE CEDAR SHINGLES…, OSHA inspections: 2 · Violations cited: 13ARTISAN CHEF MANUFAC…, OSHA inspections: 2 · Violations cited: 7BWAY CORPORATION, OSHA inspections: 2 · Violations cited: 4AMERICANA ENTERPRISE…, OSHA inspections: 2 · Violations cited: 13ADVANCED CONCRETE SU…, OSHA inspections: 2 · Violations cited: 5M.T. STEEL FABRICATO…, OSHA inspections: 2 · Violations cited: 2AMERICAN EQUIPMENT M…, OSHA inspections: 2 · Violations cited: 17TARPON STAINLESS FAB…, OSHA inspections: 2 · Violations cited: 25HY-TECH MUSHROOM COM…, OSHA inspections: 2 · Violations cited: 7ENVIRONMENTAL MATERI…, OSHA inspections: 2 · Violations cited: 13ZEP INC., OSHA inspections: 2 · Violations cited: 9SOUTHERN ILLINOIS VA…, OSHA inspections: 2 · Violations cited: 34EXCELSIOR MEDICAL CO…, OSHA inspections: 2 · Violations cited: 16SUPERIOR HOLDING, INC., OSHA inspections: 2 · Violations cited: 20PRATT PAPER (GA), LLC, OSHA inspections: 2 · Violations cited: 8GREENVALLEY CHIPPING…, OSHA inspections: 2 · Violations cited: 17STEEL SERVICES, INC., OSHA inspections: 2 · Violations cited: 15CBF BAKERY SYSTEMS, OSHA inspections: 2 · Violations cited: 12ALLIED-LOCKE INDUSTR…, OSHA inspections: 2 · Violations cited: 5Keith Tucker DBA Mar…, OSHA inspections: 2 · Violations cited: 15
Keith Tucker DBA Marble Shop has 2 OSHA inspections on record and 15 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Keith Tucker DBA Marble Shop in the Manufacturing enforcement ledger

In Manufacturing, Keith Tucker DBA Marble Shop sits at penalty rank #31,266 of 35,243 penalized establishments ($1,400 assessed).

How Keith Tucker DBA Marble Shop Compares

Keith Tucker DBA Marble Shop's 7.50 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs well below peers (0.09x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

2

First Inspection

2011-11-29

Last Inspection

2011-12-08

Inspection Span

1 yr

Violations / Inspection

7.5

Avg Penalty / Inspection

$700

Industry Avg / Inspection

$6,093

What this shows 2 inspections over 1 year, averaging 7.5 violations per visit. That's $700 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

8

Serious

53.3% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

7

Other-Than-Serious

46.7% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$1,400

Current Penalty Amount

$1,400

Penalty Reduction

None

What this shows No reduction on record. The current penalty matches the original OSHA assessment.

Industry Safety Context: Manufacturing

How Keith Tucker DBA Marble Shop compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Keith Tucker DBA Marble Shop Industry Avg
Inspections 2 2.6
Violations 15 8.0
Total Penalty $1,400 $15,763
Avg Penalty per Inspection $700 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Keith Tucker DBA Marble Shop, both outside TN so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($1,400 here).

Parton & Preble INC $1,400 MI Energy Control Systems, INC. $1,400 PA Young's Heavy Equipment $1,400 ID Pro Stainless & Sheet Metal LLC $1,400 OK

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (2 inspections here).

Custom Rubber Products 2 insp. Houston, TX White Cedar Shingles, INC. 2 insp. Superior, WI Artisan Chef Manufacturing, LLC 2 insp. Lawrence, MA Bway Corporation 2 insp. Lawrence Township, NJ

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Energy Control Systems, INC.
Pittsburgh, PA
3 inspections $1,400
Doug Mosley
Franklin, TN
3 inspections $1,400
FC Mason CO
ST Johns, MI
2 inspections $1,400
LJ Fabricators, INC.
Rockford, IL
2 inspections $1,400
A & F Plating CO., INC.
Providence, RI
2 inspections $1,400

Compare Keith Tucker DBA Marble Shop vs Energy Control Systems, INC. side-by-side →

What to do with this record

Use Keith Tucker DBA Marble Shop's enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Keith Tucker DBA Marble Shop against Energy Control Systems, INC., a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Keith Tucker DBA Marble Shop's inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Keith Tucker DBA Marble Shop safe to work at? ▼
Based on OSHA records, Keith Tucker DBA Marble Shop's workplace safety record is concerning, with multiple serious compliance issues. The employer has 15 violations across 2 inspections, including 8 serious violations. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does Keith Tucker DBA Marble Shop have? ▼
Keith Tucker DBA Marble Shop has 15 OSHA violations on record, including 8 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $1,400.
How many OSHA inspections has Keith Tucker DBA Marble Shop had? ▼
Keith Tucker DBA Marble Shop has had 2 OSHA inspections, with the first recorded on 2011-11-29 and the most recent on 2011-12-08. This averages 7.5 violations per inspection.
What is the total penalty amount for Keith Tucker DBA Marble Shop? ▼
Keith Tucker DBA Marble Shop has been assessed $1,400 in current OSHA penalties.
Does Keith Tucker DBA Marble Shop have any serious or willful violations? ▼
Yes. Keith Tucker DBA Marble Shop has 8 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Keith Tucker DBA Marble Shop operate in? ▼
Keith Tucker DBA Marble Shop operates in the Manufacturing sector (NAICS code 327991). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Keith Tucker DBA Marble Shop rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Keith Tucker DBA Marble Shop ranks #82,453 (the lower half of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Keith Tucker DBA Marble Shop's safety record compare to industry average? ▼
Keith Tucker DBA Marble Shop's total OSHA penalty of $1,400 is below the Manufacturing industry average of $15,763 per employer. The employer has 2 inspections compared to the industry average of 2.6 per employer. For a direct comparison, A & F Plating CO., INC. in Providence, RI is a similar manufacturing employer with $1,400 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 2 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.