Manufacturing · Huntington Beach, CA

Karls Custom Sash & Doors

According to OSHA enforcement records (2010–2026), Karls Custom Sash & Doors ranks #25,236 of 99,447 penalized U.S. employers by total current penalty, with a concerning safety record: 14 violations across 3 inspections.

Top 25% by penalty14% serious
$14,355
OSHA penalties
14
Violations cited
3
OSHA inspections
#25,236
of 99,447 penalized employers

Karls Custom Sash & Doors in Huntington Beach, CA has been the subject of 3 OSHA workplace inspections and 14 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $14,355. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Karls Custom Sash & Doors 3 times over 4 years, roughly once every couple of years. These inspections resulted in 14 violations, averaging 4.7 per inspection, above what's typical for a single visit. According to OSHA enforcement records, its total current penalty ranks #25,236 of 99,447 penalized U.S. employers (the top quarter of penalized employers nationally). Of these, 2 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this sits roughly in line with peers (1.2x the sector average) on inspection frequency. For comparison, Four Way Pallet in Huntington Station, NY is another manufacturing employer with 0 OSHA inspections on record and $0 in current penalties.

4.7
violations per inspection
14.3%
of violations were serious
#25,236
of 99,447 penalized employers

Compliance score

F 22/100
  • F OSHA safety compliance: 14 violations across 3 OSHA inspections (4.7 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How Karls Custom Sash & Doors compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Karls Custom Sash & Doors sits roughly in line with peers (0.9x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$14,355 Bottom 25% least affordable more affordable than 25% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Below this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). This entry sits in this band. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Karls Custom Sash & Doors.

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both3.03.033.03.03.611.118.525.933.4OSHA inspectionsViolations citedINTERNATIONAL PAPER …, OSHA inspections: 3 · Violations cited: 8AMERICAN NITRILE OPE…, OSHA inspections: 3 · Violations cited: 30QUEST SPECIALTY COAT…, OSHA inspections: 3 · Violations cited: 20SUMMIT SEALANTS, INC., OSHA inspections: 3 · Violations cited: 32MODERN MACHINE SHOP,…, OSHA inspections: 3 · Violations cited: 17TRAILER COMPONENT MF…, OSHA inspections: 3 · Violations cited: 15GOSHEN STAMPING, OSHA inspections: 3 · Violations cited: 17SKYLINE COMPOSITE, I…, OSHA inspections: 3 · Violations cited: 26WESTPORT AXLE CORP., OSHA inspections: 3 · Violations cited: 12ENDEAVOR ENERGY RESO…, OSHA inspections: 3 · Violations cited: 5REPUBLIC METALS INC, OSHA inspections: 3 · Violations cited: 30MATT INDUSTRIES, OSHA inspections: 3 · Violations cited: 8HERITAGE MECHANICAL …, OSHA inspections: 3 · Violations cited: 11INTERLECTRIC CORPORA…, OSHA inspections: 3 · Violations cited: 31VALLEY TRUCK PARTS INC, OSHA inspections: 3 · Violations cited: 13DICKSON FURNITURE MA…, OSHA inspections: 3 · Violations cited: 5SUNSHINE ELECTRONIC …, OSHA inspections: 3 · Violations cited: 8THE HARTLEY PRESS, I…, OSHA inspections: 3 · Violations cited: 14INTREPID MACHINE, INC., OSHA inspections: 3 · Violations cited: 10HACKNEY HOME FURNISH…, OSHA inspections: 3 · Violations cited: 17Karls Custom Sash & …, OSHA inspections: 3 · Violations cited: 14
Karls Custom Sash & Doors has 3 OSHA inspections on record and 14 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Karls Custom Sash & Doors in the Manufacturing enforcement ledger

Among 35,243 Manufacturing employers with OSHA penalties on file, Karls Custom Sash & Doors ranks #11,867 at $14,355 current penalty.

How Karls Custom Sash & Doors Compares

Karls Custom Sash & Doors's 4.67 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty sits roughly in line with peers (0.9x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

3

First Inspection

2010-04-29

Last Inspection

2014-03-12

Inspection Span

4 yrs

Violations / Inspection

4.7

Avg Penalty / Inspection

$4,785

Industry Avg / Inspection

$6,093

What this shows 3 inspections over 4 years, averaging 4.7 violations per visit. That's $4,785 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

2

Serious

14.3% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

12

Other-Than-Serious

85.7% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$41,465

Current Penalty Amount

$14,355

Penalty Reduction

65.4%

What this shows Penalties were reduced by $27,110 from the initial assessment of $41,465. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Karls Custom Sash & Doors compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Karls Custom Sash & Doors Industry Avg
Inspections 3 2.6
Violations 14 8.0
Total Penalty $14,355 $15,763
Avg Penalty per Inspection $4,785 $6,093

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Karls Custom Sash & Doors, both outside CA so the neighborhoods are not geographic containment.

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Compare Karls Custom Sash & Doors vs Safeway INC Div. Vons Milk Plant side-by-side →

What to do with this record

Use Karls Custom Sash & Doors's enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Karls Custom Sash & Doors against Safeway INC Div. Vons Milk Plant, a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Karls Custom Sash & Doors's inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Karls Custom Sash & Doors safe to work at?
Based on OSHA records, Karls Custom Sash & Doors's workplace safety record is concerning, with multiple serious compliance issues. The employer has 14 violations across 3 inspections, including 2 serious violations. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does Karls Custom Sash & Doors have?
Karls Custom Sash & Doors has 14 OSHA violations on record, including 2 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $14,355.
How many OSHA inspections has Karls Custom Sash & Doors had?
Karls Custom Sash & Doors has had 3 OSHA inspections, with the first recorded on 2010-04-29 and the most recent on 2014-03-12. This averages 4.7 violations per inspection.
What is the total penalty amount for Karls Custom Sash & Doors?
Karls Custom Sash & Doors has been assessed $14,355 in current OSHA penalties, reduced from an initial assessment of $41,465 (a 65.4% reduction).
Does Karls Custom Sash & Doors have any serious or willful violations?
Yes. Karls Custom Sash & Doors has 2 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Karls Custom Sash & Doors operate in?
Karls Custom Sash & Doors operates in the Manufacturing sector (NAICS code 321999). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Karls Custom Sash & Doors rank nationally on OSHA penalties?
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Karls Custom Sash & Doors ranks #25,236 (the top quarter of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Karls Custom Sash & Doors's safety record compare to industry average?
Karls Custom Sash & Doors's total OSHA penalty of $14,355 is below the Manufacturing industry average of $15,763 per employer. The employer has 3 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Four Way Pallet in Huntington Station, NY is a similar manufacturing employer with $0 in current penalties.
Data Sources & Methodology

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 3 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.