Manufacturing · Thomasville, AL

JMC Steel Group, INC.

According to OSHA enforcement records (2010–2026), JMC Steel Group, INC. ranks #39,070 of 99,447 penalized U.S. employers by total current penalty, with a average safety record: 4 violations across 3 inspections.

Upper half by penalty50% serious
$8,721
OSHA penalties
4
Violations cited
3
OSHA inspections
#39,070
of 99,447 penalized employers

JMC Steel Group, INC. in Thomasville, AL has been the subject of 3 OSHA workplace inspections and 4 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $8,721. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected JMC Steel Group, INC. 3 times over 2 years, roughly annually. These inspections resulted in 4 violations, averaging 1.3 per inspection. According to OSHA enforcement records, its total current penalty ranks #39,070 of 99,447 penalized U.S. employers (the upper half of penalized employers nationally). Of these, 2 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this sits roughly in line with peers (1.2x the sector average) on inspection frequency. For comparison, Piramal Critical Care, INC. in Bethlehem, PA is another manufacturing employer with 4 OSHA inspections on record and $8,721 in current penalties.

1.3
violations per inspection
50.0%
of violations were serious
#39,070
of 99,447 penalized employers

Compliance score

C 71/100
  • C OSHA safety compliance: 4 violations across 3 OSHA inspections (1.3 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How JMC Steel Group, INC. compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows JMC Steel Group, INC. runs moderately below peers (0.6x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$8,721 Bottom 39% least affordable more affordable than 39% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). This entry sits in this band. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Above this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is JMC Steel Group, INC..

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both3.03.033.03.0011.823.635.447.1OSHA inspectionsViolations citedCARL'S DONUTS, INC., OSHA inspections: 3 · Violations cited: 24PJ TRAILERS MFG. CO.…, OSHA inspections: 3 · Violations cited: 12UTEX INDUSTRIES, INC., OSHA inspections: 3 · Violations cited: 12KNOUSE FOODS, INC., OSHA inspections: 3 · Violations cited: 7MILLENNIUM STEERING, OSHA inspections: 3 · Violations cited: 45DEUS MODERN, LLC, OSHA inspections: 3 · Violations cited: 26AIR-FLO MANUFACTURIN…, OSHA inspections: 3 · Violations cited: 14ADIRONDACK SCENIC, I…, OSHA inspections: 3 · Violations cited: 7DARIO'S PALLETS, CORP., OSHA inspections: 3 · Violations cited: 12ELGIN INDUSTRIES, INC., OSHA inspections: 3 · Violations cited: 3GENESEE GLOBAL GROUP…, OSHA inspections: 3 · Violations cited: 5MULLICAN FLOORING, L…, OSHA inspections: 3 · Violations cited: 5POLYESTER FIBERS, LLC, OSHA inspections: 3 · Violations cited: 7GOODYEAR DUNLOP TIRE…, OSHA inspections: 3 · Violations cited: 3MNP CORPORATION, OSHA inspections: 3 · Violations cited: 21WIRETECH FABRICATORS…, OSHA inspections: 3 · Violations cited: 14LINEAR MOTION LLC, OSHA inspections: 3 · Violations cited: 12WISCONSIN PRECISION …, OSHA inspections: 3 · Violations cited: 5AMES GOLDSMITH CORPO…, OSHA inspections: 3 · Violations cited: 2LASLO CUSTOM KITCHEN…, OSHA inspections: 3 · Violations cited: 15JMC Steel Group, INC., OSHA inspections: 3 · Violations cited: 4
JMC Steel Group, INC. has 3 OSHA inspections on record and 4 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

JMC Steel Group, INC. in the Manufacturing enforcement ledger

In Manufacturing, JMC Steel Group, INC. sits at penalty rank #17,365 of 35,243 penalized establishments ($8,721 assessed).

How JMC Steel Group, INC. Compares

JMC Steel Group, INC.'s 1.33 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs moderately below peers (0.6x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

3

First Inspection

2012-07-18

Last Inspection

2014-04-09

Inspection Span

2 yrs

Violations / Inspection

1.3

Avg Penalty / Inspection

$2,907

Industry Avg / Inspection

$6,093

What this shows 3 inspections over 2 years, averaging 1.3 violations per visit. That's $2,907 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

2

Serious

50.0% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

2

Other-Than-Serious

50.0% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$7,965

Current Penalty Amount

$8,721

Penalty Reduction

None

What this shows No reduction on record. The current penalty matches the original OSHA assessment.

Industry Safety Context: Manufacturing

How JMC Steel Group, INC. compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric JMC Steel Group, INC. Industry Avg
Inspections 3 2.6
Violations 4 8.0
Total Penalty $8,721 $15,763
Avg Penalty per Inspection $2,907 $6,093

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for JMC Steel Group, INC., both outside AL so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($8,721 here).

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (3 inspections here).

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Compare JMC Steel Group, INC. vs Piramal Critical Care, INC. side-by-side →

What to do with this record

Use JMC Steel Group, INC.'s enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare JMC Steel Group, INC. against Piramal Critical Care, INC., a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether JMC Steel Group, INC.'s inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is JMC Steel Group, INC. safe to work at?
Based on OSHA records, JMC Steel Group, INC.'s workplace safety record is average, with typical for this industry. The employer has 4 violations across 3 inspections, including 2 serious violations. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does JMC Steel Group, INC. have?
JMC Steel Group, INC. has 4 OSHA violations on record, including 2 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $8,721.
How many OSHA inspections has JMC Steel Group, INC. had?
JMC Steel Group, INC. has had 3 OSHA inspections, with the first recorded on 2012-07-18 and the most recent on 2014-04-09. This averages 1.3 violations per inspection.
What is the total penalty amount for JMC Steel Group, INC.?
JMC Steel Group, INC. has been assessed $8,721 in current OSHA penalties.
Does JMC Steel Group, INC. have any serious or willful violations?
Yes. JMC Steel Group, INC. has 2 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does JMC Steel Group, INC. operate in?
JMC Steel Group, INC. operates in the Manufacturing sector (NAICS code 331210). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does JMC Steel Group, INC. rank nationally on OSHA penalties?
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, JMC Steel Group, INC. ranks #39,070 (the upper half of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does JMC Steel Group, INC.'s safety record compare to industry average?
JMC Steel Group, INC.'s total OSHA penalty of $8,721 is below the Manufacturing industry average of $15,763 per employer. The employer has 3 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Piramal Critical Care, INC. in Bethlehem, PA is a similar manufacturing employer with $8,721 in current penalties.
Data Sources & Methodology

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 3 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.