PlainWorker
Employers › KS

Manufacturing · Sterling, KS

Jacam Manufacturing 2013, LLC

According to OSHA enforcement records (2010–2026), Jacam Manufacturing 2013, LLC ranks #38,594 of 99,447 penalized U.S. employers by total current penalty, with a relatively clean safety record: 1 violations across 2 inspections.

Upper half by penalty0% serious
$8,873
OSHA penalties
1
Violations cited
2
OSHA inspections
#38,594
of 99,447 penalized employers

Jacam Manufacturing 2013, LLC in Sterling, KS has been the subject of 2 OSHA workplace inspections and 1 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $8,873. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Jacam Manufacturing 2013, LLC 2 times over 1 year - more than twice a year on average. These inspections resulted in 1 violation, averaging 0.5 per inspection, on the lighter side. According to OSHA enforcement records, its total current penalty ranks #38,594 of 99,447 penalized U.S. employers (the upper half of penalized employers nationally). Against the Manufacturing industry average of 3 inspections per employer, this runs moderately below peers (0.8x the sector average) on inspection frequency. For comparison, Frit Industries in Walnut Ridge, AR is another manufacturing employer with 2 OSHA inspections on record and $8,873 in current penalties.

0.5
violations per inspection
0.0%
of violations were serious
#38,594
of 99,447 penalized employers

Compliance score

B 83/100
  • B OSHA safety compliance: 1 violation across 2 OSHA inspections (0.5 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How Jacam Manufacturing 2013, LLC compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Jacam Manufacturing 2013, LLC runs moderately below peers (0.6x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$8,873 Bottom 39% least affordable more affordable than 39% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). This entry sits in this band. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Above this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Jacam Manufacturing 2013, LLC.

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both1.92.022.02.008.917.826.735.6OSHA inspectionsViolations citedGENERAL DYNAMICS BATH IRON WORKS, OSHA inspections: 2 · Violations cited: 34MAYCO MANUFACTURING, LLC DBA MAYCO INDUSTRIES, INC., OSHA inspections: 2 · Violations cited: 33TYR TACTICAL, LLC, OSHA inspections: 2 · Violations cited: 7SURGICAL APPLIANCE INDUSTRIES, INC, OSHA inspections: 2 · Violations cited: 16QUALITY READY MIX, INC., OSHA inspections: 2 · Violations cited: 28GREEN FOREST CABINETRY, OSHA inspections: 2 · Violations cited: 14PIPING ROCK HEALTH PRODUCTS, LLC, OSHA inspections: 2 · Violations cited: 5ALONSO & CARUS IRON WORKS INC, OSHA inspections: 2 · Violations cited: 20NOVIPAX BUYER LLC, OSHA inspections: 2 · Violations cited: 3BRUSH RESEARCH MFG, OSHA inspections: 2 · Violations cited: 3SUN DEEP, INC., OSHA inspections: 2 · Violations cited: 8ALADDIN METAL PRODUCTS, INC., OSHA inspections: 2 · Violations cited: 10GEORGIA WEB, INC., OSHA inspections: 2 · Violations cited: 11ADVANCE MACHINE INC., OSHA inspections: 2 · Violations cited: 3SMITHVILLE MANUFACTURING TOOLING AND STAMPING, OSHA inspections: 2 · Violations cited: 28PITTSBURGH PIPE & SUPPLY CORP., OSHA inspections: 2 · Violations cited: 16PELLERIN MILNOR CORPORATION, INC., OSHA inspections: 2 · Violations cited: 5DUTTON-LAINSON COMPANY, OSHA inspections: 2 · Violations cited: 13STORFLEX HOLDINGS, INC., OSHA inspections: 2 · Violations cited: 16PRIME INC, OSHA inspections: 2 · Violations cited: 13Jacam Manufacturing 2013, LLC, OSHA inspections: 2 · Violations cited: 1
Jacam Manufacturing 2013, LLC has 2 OSHA inspections on record and 1 violation cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Jacam Manufacturing 2013, LLC in the Manufacturing enforcement ledger

In Manufacturing, Jacam Manufacturing 2013, LLC sits at penalty rank #17,154 of 35,243 penalized establishments ($8,873 assessed).

How Jacam Manufacturing 2013, LLC Compares

Jacam Manufacturing 2013, LLC's 0.50 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs moderately below peers (0.6x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

2

First Inspection

2017-04-14

Last Inspection

2018-01-26

Inspection Span

1 yr

Violations / Inspection

0.5

Avg Penalty / Inspection

$4,437

Industry Avg / Inspection

$6,093

What this shows 2 inspections over 1 year, averaging 0.5 violations per visit. That's $4,437 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

0

Serious

0.0% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

1

Other-Than-Serious

100.0% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$12,675

Current Penalty Amount

$8,873

Penalty Reduction

30.0%

What this shows Penalties were reduced by $3,802 from the initial assessment of $12,675. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Jacam Manufacturing 2013, LLC compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Jacam Manufacturing 2013, LLC Industry Avg
Inspections 2 2.6
Violations 1 8.0
Total Penalty $8,873 $15,763
Avg Penalty per Inspection $4,437 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Jacam Manufacturing 2013, LLC, both outside KS so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($8,873 here).

Valmet INC $8,873 ME Crown Equipment Corporation $8,873 OH Injection Molding Solutions, INC. $8,873 WI Spectrum Brands Corporation $8,873 MO

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (2 inspections here).

General Dynamics Bath Iron Works 2 insp. Bath, ME Mayco Manufacturing, LLC DBA Mayco Industries, INC. 2 insp. Granite City, IL TYR Tactical, LLC 2 insp. Peoria, AZ Surgical Appliance Industries, INC 2 insp. Ripley, OH

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Valmet INC
Biddeford, ME
3 inspections $8,873
Crown Equipment Corporation
New Bremen, OH
4 inspections $8,873
Injection Molding Solutions, INC.
Siren, WI
2 inspections $8,873
Spectrum Brands Corporation
Bridgeton, MO
2 inspections $8,873
Frit Industries
Walnut Ridge, AR
2 inspections $8,873

Compare Jacam Manufacturing 2013, LLC vs Valmet INC side-by-side →

What to do with this record

Use Jacam Manufacturing 2013, LLC's enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Jacam Manufacturing 2013, LLC against Valmet INC, a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Jacam Manufacturing 2013, LLC's inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Jacam Manufacturing 2013, LLC safe to work at? ▼
Based on OSHA records, Jacam Manufacturing 2013, LLC's workplace safety record is relatively clean, with fewer violations than typical. The employer has 1 violations across 2 inspections. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does Jacam Manufacturing 2013, LLC have? ▼
Jacam Manufacturing 2013, LLC has 1 OSHA violations on record, including 0 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $8,873.
How many OSHA inspections has Jacam Manufacturing 2013, LLC had? ▼
Jacam Manufacturing 2013, LLC has had 2 OSHA inspections, with the first recorded on 2017-04-14 and the most recent on 2018-01-26. This averages 0.5 violations per inspection.
What is the total penalty amount for Jacam Manufacturing 2013, LLC? ▼
Jacam Manufacturing 2013, LLC has been assessed $8,873 in current OSHA penalties, reduced from an initial assessment of $12,675 (a 30.0% reduction).
What industry does Jacam Manufacturing 2013, LLC operate in? ▼
Jacam Manufacturing 2013, LLC operates in the Manufacturing sector (NAICS code 325110). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Jacam Manufacturing 2013, LLC rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Jacam Manufacturing 2013, LLC ranks #38,594 (the upper half of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Jacam Manufacturing 2013, LLC's safety record compare to industry average? ▼
Jacam Manufacturing 2013, LLC's total OSHA penalty of $8,873 is below the Manufacturing industry average of $15,763 per employer. The employer has 2 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Frit Industries in Walnut Ridge, AR is a similar manufacturing employer with $8,873 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 2 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.