PlainWorker
Employers › KS

Manufacturing · Wichita, KS

J R Custom Metal Products, INC.

According to OSHA enforcement records (2010–2026), J R Custom Metal Products, INC. ranks #82,653 of 99,447 penalized U.S. employers by total current penalty, with a relatively clean safety record: 2 violations across 2 inspections.

Lower half by penalty50% serious
$1,365
OSHA penalties
2
Violations cited
2
OSHA inspections
#82,653
of 99,447 penalized employers

J R Custom Metal Products, INC. in Wichita, KS has been the subject of 2 OSHA workplace inspections and 2 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $1,365. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected J R Custom Metal Products, INC. 2 times over 1 year - more than twice a year on average. These inspections resulted in 2 violations, averaging 1.0 per inspection. According to OSHA enforcement records, its total current penalty ranks #82,653 of 99,447 penalized U.S. employers (the lower half of penalized employers nationally). Of these, 1 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs moderately below peers (0.8x the sector average) on inspection frequency. For comparison, Whitetail Enterprises LLC DBA Potomac Cast Stone in Berryville, VA is another manufacturing employer with 2 OSHA inspections on record and $1,365 in current penalties.

1.0
violations per inspection
50.0%
of violations were serious
#82,653
of 99,447 penalized employers

Compliance score

C 75/100
  • C OSHA safety compliance: 2 violations across 2 OSHA inspections (1.0 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How this employer compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows J R Custom Metal Products, INC. runs well below peers (0.09x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$1,365 Top 17% most affordable more affordable than 83% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). This entry sits in this band. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Above this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Above this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is J R Custom Metal Products, INC..

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both1.92.022.02.0012.825.738.551.4OSHA inspectionsViolations citedKMCO, L.P., OSHA inspections: 2 · Violations cited: 49PEGASUS FOODS, INC., OSHA inspections: 2 · Violations cited: 8TABLE TALK PIES INC., OSHA inspections: 2 · Violations cited: 5A&W MANAGEMENT HOLDI…, OSHA inspections: 2 · Violations cited: 18INTERNATIONAL TECHNI…, OSHA inspections: 2 · Violations cited: 29BENNETT HEAT TREATIN…, OSHA inspections: 2 · Violations cited: 31NOVALIS US, LLC, OSHA inspections: 2 · Violations cited: 13PRESTRESS SERVICES I…, OSHA inspections: 2 · Violations cited: 22FRIT INDUSTRIES, INC., OSHA inspections: 2 · Violations cited: 19BIMBO BAKERIES USA, …, OSHA inspections: 2 · Violations cited: 7AMERICAN PANEL CORPO…, OSHA inspections: 2 · Violations cited: 7IPM FOODS, LLC, OSHA inspections: 2 · Violations cited: 5R W GARCIA CORP, INC., OSHA inspections: 2 · Violations cited: 16EJ USA INC, OSHA inspections: 2 · Violations cited: 25THE EDRO CORPORATION, OSHA inspections: 2 · Violations cited: 29WASTE PROCESSING EQU…, OSHA inspections: 2 · Violations cited: 12S & K MACHINEWORKS C…, OSHA inspections: 2 · Violations cited: 31NOVA COIL, INC., OSHA inspections: 2 · Violations cited: 7TADBIK NJ, INC, OSHA inspections: 2 · Violations cited: 9SAFEWAY, INC., OSHA inspections: 2 · Violations cited: 6J R Custom Metal Pro…, OSHA inspections: 2 · Violations cited: 2
J R Custom Metal Products, INC. has 2 OSHA inspections on record and 2 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

J R Custom Metal Products, INC. in the Manufacturing enforcement ledger

Among 35,243 Manufacturing employers with OSHA penalties on file, J R Custom Metal Products, INC. ranks #31,402 at $1,365 current penalty.

How J R Custom Metal Products, INC. Compares

J R Custom Metal Products, INC.'s 1.00 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs well below peers (0.09x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

2

First Inspection

2010-07-07

Last Inspection

2011-07-12

Inspection Span

1 yr

Violations / Inspection

1.0

Avg Penalty / Inspection

$683

Industry Avg / Inspection

$6,093

What this shows 2 inspections over 1 year, averaging 1.0 violations per visit. That's $683 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

1

Serious

50.0% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

1

Other-Than-Serious

50.0% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$1,950

Current Penalty Amount

$1,365

Penalty Reduction

30.0%

What this shows Penalties were reduced by $585 from the initial assessment of $1,950. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How J R Custom Metal Products, INC. compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric J R Custom Metal Products, INC. Industry Avg
Inspections 2 2.6
Violations 2 8.0
Total Penalty $1,365 $15,763
Avg Penalty per Inspection $683 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for J R Custom Metal Products, INC., both outside KS so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($1,365 here).

Bakery DE France, INC. $1,365 MD Tappers INC DBA Genereaux Fine Wood Products $1,365 MN Bondhus Corporation $1,365 MN Flame Metals Processing Corporation $1,365 MN

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (2 inspections here).

Kmco, L.P. 2 insp. Crosby, TX Pegasus Foods, INC. 2 insp. Los Angeles, CA Table Talk Pies INC. 2 insp. Worcester, MA A&W Management Holdings 2 insp. Fort Worth, TX

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Bakery DE France, INC.
Frederick, MD
2 inspections $1,365
Tappers INC DBA Genereaux Fine Wood Products
Monticello, MN
2 inspections $1,365
Bondhus Corporation
Monticello, MN
2 inspections $1,365
Flame Metals Processing Corporation
Rogers, MN
2 inspections $1,365
Whitetail Enterprises LLC DBA Potomac Cast Stone
Berryville, VA
2 inspections $1,365

Compare J R Custom Metal Products, INC. vs Bakery DE France, INC. side-by-side →

What to do with this record

Use J R Custom Metal Products, INC.'s enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare J R Custom Metal Products, INC. against Bakery DE France, INC., a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether J R Custom Metal Products, INC.'s inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is J R Custom Metal Products, INC. safe to work at? ▼
Based on OSHA records, J R Custom Metal Products, INC.'s workplace safety record is relatively clean, with fewer violations than typical. The employer has 2 violations across 2 inspections, including 1 serious violations. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does J R Custom Metal Products, INC. have? ▼
J R Custom Metal Products, INC. has 2 OSHA violations on record, including 1 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $1,365.
How many OSHA inspections has J R Custom Metal Products, INC. had? ▼
J R Custom Metal Products, INC. has had 2 OSHA inspections, with the first recorded on 2010-07-07 and the most recent on 2011-07-12. This averages 1.0 violations per inspection.
What is the total penalty amount for J R Custom Metal Products, INC.? ▼
J R Custom Metal Products, INC. has been assessed $1,365 in current OSHA penalties, reduced from an initial assessment of $1,950 (a 30.0% reduction).
Does J R Custom Metal Products, INC. have any serious or willful violations? ▼
Yes. J R Custom Metal Products, INC. has 1 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does J R Custom Metal Products, INC. operate in? ▼
J R Custom Metal Products, INC. operates in the Manufacturing sector (NAICS code 332999). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does J R Custom Metal Products, INC. rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, J R Custom Metal Products, INC. ranks #82,653 (the lower half of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does J R Custom Metal Products, INC.'s safety record compare to industry average? ▼
J R Custom Metal Products, INC.'s total OSHA penalty of $1,365 is below the Manufacturing industry average of $15,763 per employer. The employer has 2 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Whitetail Enterprises LLC DBA Potomac Cast Stone in Berryville, VA is a similar manufacturing employer with $1,365 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 2 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.