PlainWorker
Employers › OH

Manufacturing · Niles, OH

International Technical Polymer Systems

According to OSHA enforcement records (2010–2026), International Technical Polymer Systems has a relatively clean safety record: 0 violations across 2 inspections. See the full breakdown below.

$0
OSHA penalties
0
Violations cited
2
OSHA inspections

International Technical Polymer Systems in Niles, OH has been the subject of 2 OSHA workplace inspections and 0 citations since 2010, according to enforcement records from the U.S. Department of Labor. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected International Technical Polymer Systems 2 times across a longer 9-year span, an infrequent cadence. None of these inspections resulted in a citation. Against the Manufacturing industry average of 3 inspections per employer, this runs moderately below peers (0.8x the sector average) on inspection frequency. For comparison, Mulherin Lumber Company in Augusta, GA is another manufacturing employer with 2 OSHA inspections on record and $0 in current penalties.

0.0
violations per inspection
0.0%
of violations were serious

Compliance score

A 90/100
  • A OSHA safety compliance: 0 violations across 2 OSHA inspections (0.0 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is International Technical Polymer Systems.

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both1.92.022.02.008.917.926.835.7OSHA inspectionsViolations citedPORT JERVIS LABORATO…, OSHA inspections: 2 · Violations cited: 5MAGNESITA REFRACTORIES, OSHA inspections: 2 · Violations cited: 7ACCUTRON INC., OSHA inspections: 2 · Violations cited: 30WEST FRASER WOOD PRO…, OSHA inspections: 2 · Violations cited: 4DIAMOND SHAMROCK REF…, OSHA inspections: 2 · Violations cited: 5GRANITE RADIANCE, INC., OSHA inspections: 2 · Violations cited: 23PALLET RECYCLE OF AL…, OSHA inspections: 2 · Violations cited: 34AFE VICTORY INC., OSHA inspections: 2 · Violations cited: 34STERLING SHIPYARD, OSHA inspections: 2 · Violations cited: 13HUTCO, INC., OSHA inspections: 2 · Violations cited: 15CMH MANUFACTURING WE…, OSHA inspections: 2 · Violations cited: 26ALUMINUM CO. OF AMER…, OSHA inspections: 2 · Violations cited: 7H&H MANUFACTURING CO…, OSHA inspections: 2 · Violations cited: 15COMMERCIAL CONSTRUCT…, OSHA inspections: 2 · Violations cited: 33RITE STUFF FOODS, INC, OSHA inspections: 2 · Violations cited: 24ANNIN FLAGMAKERS, OSHA inspections: 2 · Violations cited: 2SOLARCITY CORPORATION, OSHA inspections: 2 · Violations cited: 3AC & A LLC, OSHA inspections: 2 · Violations cited: 7PACKAGING CORPORATIO…, OSHA inspections: 2 · Violations cited: 4MONARCH BRANDS, INC., OSHA inspections: 2 · Violations cited: 7International Techni…, OSHA inspections: 2 · Violations cited: 0
International Technical Polymer Systems has 2 OSHA inspections on record and 0 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

How International Technical Polymer Systems Compares

2 OSHA inspections on record for International Technical Polymer Systems in Niles, OH, zero violations cited, a cleaner record than the Manufacturing sector average of 8.0 violations per employer.

No OSHA penalty has been assessed against International Technical Polymer Systems to date. The Manufacturing sector average runs $15,763 per employer.

Enforcement detail

OSHA Inspection History

Total Inspections

2

First Inspection

2013-08-28

Last Inspection

2023-01-03

Inspection Span

9 yrs

Violations / Inspection

0.0

Avg Penalty / Inspection

$0

Industry Avg / Inspection

$6,093

What this shows 2 inspections over 9 years, averaging 0.0 violations per visit. That's $0 per inspection vs. the Manufacturing average of $6,093.

Industry Safety Context: Manufacturing

How International Technical Polymer Systems compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric International Technical Polymer Systems Industry Avg
Inspections 2 2.6
Violations 0 8.0
Total Penalty $0 $15,763
Avg Penalty per Inspection $0 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for International Technical Polymer Systems, both outside OH so the neighborhoods are not geographic containment.

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (2 inspections here).

Port Jervis Laboratories, INC. 2 insp. Port Jervis, NY Magnesita Refractories 2 insp. York, PA Accutron INC. 2 insp. Windsor, CT West Fraser Wood Products, INC. 2 insp. Henderson, TX

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Burly Products
Post Falls, ID
2 inspections $0
Easco Hand Tools, INC. DBA Danaher Tool Group
Gastonia, NC
2 inspections $0
Perfection Gear, INC.
Asheville, NC
2 inspections $0
Mulherin Lumber Company
Augusta, GA
2 inspections $0
National Manufacturing Group
Joplin, MO
2 inspections $0

Compare International Technical Polymer Systems vs Burly Products side-by-side →

What to do with this record

Use International Technical Polymer Systems's enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare International Technical Polymer Systems against Burly Products, a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether International Technical Polymer Systems's inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is International Technical Polymer Systems safe to work at? ▼
Based on OSHA records, International Technical Polymer Systems's workplace safety record is relatively clean, with fewer violations than typical. The employer has 0 violations across 2 inspections. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does International Technical Polymer Systems have? ▼
International Technical Polymer Systems has 0 OSHA violations on record, including 0 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $0.
How many OSHA inspections has International Technical Polymer Systems had? ▼
International Technical Polymer Systems has had 2 OSHA inspections, with the first recorded on 2013-08-28 and the most recent on 2023-01-03. This averages 0.0 violations per inspection.
What is the total penalty amount for International Technical Polymer Systems? ▼
International Technical Polymer Systems has been assessed $0 in current OSHA penalties.
What industry does International Technical Polymer Systems operate in? ▼
International Technical Polymer Systems operates in the Manufacturing sector (NAICS code 325510). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
How does International Technical Polymer Systems's safety record compare to industry average? ▼
International Technical Polymer Systems's total OSHA penalty of $0 is below the Manufacturing industry average of $15,763 per employer. The employer has 2 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Mulherin Lumber Company in Augusta, GA is a similar manufacturing employer with $0 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 2 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.