Manufacturing · Norcross, GA

Innovative Metals Company, INC.

According to OSHA enforcement records (2010–2026), Innovative Metals Company, INC. ranks #6,749 of 99,447 penalized U.S. employers by total current penalty, with a concerning safety record: 25 violations across 3 inspections.

Top 10% by penalty44% serious
$41,118
OSHA penalties
25
Violations cited
3
OSHA inspections
#6,749
of 99,447 penalized employers

Innovative Metals Company, INC. in Norcross, GA has been the subject of 3 OSHA workplace inspections and 25 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $41,118. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Innovative Metals Company, INC. 3 times across a longer 8-year span, an infrequent cadence. These inspections resulted in 25 violations, averaging 8.3 per inspection - a notably high rate. According to OSHA enforcement records, its total current penalty ranks #6,749 of 99,447 penalized U.S. employers (the top 10% of penalized employers nationally). Of these, 11 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this sits roughly in line with peers (1.2x the sector average) on inspection frequency. For comparison, Detotec North America, INC. in Sterling, CT is another manufacturing employer with 4 OSHA inspections on record and $41,106 in current penalties.

8.3
violations per inspection
44.0%
of violations were serious
#6,749
of 99,447 penalized employers

Compliance score

F 0/100
  • F OSHA safety compliance: 25 violations across 3 OSHA inspections (8.3 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How this employer compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Innovative Metals Company, INC. runs well above peers (2.6x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$41,118 Bottom 7% least affordable more affordable than 7% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Below this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Below this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Below this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Below this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Below this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Below this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Below this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). This entry sits in this band. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Innovative Metals Company, INC..

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both3.03.033.03.01.310.419.528.637.6OSHA inspectionsViolations citedAVID PALLET SERVICES…, OSHA inspections: 3 · Violations cited: 12EXIGO METAL WORKS, OSHA inspections: 3 · Violations cited: 33LOCKHEED MARTIN CORP…, OSHA inspections: 3 · Violations cited: 13KVK TECH, INC., OSHA inspections: 3 · Violations cited: 10SANDS LEVEL & TOOL C…, OSHA inspections: 3 · Violations cited: 8HY-VEE, INC., OSHA inspections: 3 · Violations cited: 8NUWAY TOBACCO COMPANY, OSHA inspections: 3 · Violations cited: 13J & L MANUFACTURING …, OSHA inspections: 3 · Violations cited: 36KMF, INC., OSHA inspections: 3 · Violations cited: 15TOM RICHARDS, INC., OSHA inspections: 3 · Violations cited: 8YAMASA ENTERPRISES, OSHA inspections: 3 · Violations cited: 10SOLUTIA INC., OSHA inspections: 3 · Violations cited: 6SUBURBAN CABINET SHO…, OSHA inspections: 3 · Violations cited: 11NILES BUILDING PRODU…, OSHA inspections: 3 · Violations cited: 5OAK RIDGE CUSTOM CAB…, OSHA inspections: 3 · Violations cited: 25TRANS FORM PLASTICS …, OSHA inspections: 3 · Violations cited: 6GENERAL PRESS & FABR…, OSHA inspections: 3 · Violations cited: 10PRECISION MASTERS IN…, OSHA inspections: 3 · Violations cited: 32ARCELORMITTAL, OSHA inspections: 3 · Violations cited: 3OVE WATER SERVICES, …, OSHA inspections: 3 · Violations cited: 32Innovative Metals Co…, OSHA inspections: 3 · Violations cited: 25
Innovative Metals Company, INC. has 3 OSHA inspections on record and 25 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Innovative Metals Company, INC. in the Manufacturing enforcement ledger

In Manufacturing, Innovative Metals Company, INC. sits at penalty rank #3,398 of 35,243 penalized establishments ($41,118 assessed).

How Innovative Metals Company, INC. Compares

Innovative Metals Company, INC.'s 8.33 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs well above peers (2.6x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

3

First Inspection

2015-10-01

Last Inspection

2023-05-09

Inspection Span

8 yrs

Violations / Inspection

8.3

Avg Penalty / Inspection

$13,706

Industry Avg / Inspection

$6,093

What this shows 3 inspections over 8 years, averaging 8.3 violations per visit. That's $13,706 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

11

Serious

44.0% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

14

Other-Than-Serious

56.0% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$98,133

Current Penalty Amount

$41,118

Penalty Reduction

58.1%

What this shows Penalties were reduced by $57,015 from the initial assessment of $98,133. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Innovative Metals Company, INC. compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Innovative Metals Company, INC. Industry Avg
Inspections 3 2.6
Violations 25 8.0
Total Penalty $41,118 $15,763
Avg Penalty per Inspection $13,706 $6,093

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Innovative Metals Company, INC., both outside GA so the neighborhoods are not geographic containment.

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Compare Innovative Metals Company, INC. vs Riceland Foods, INC. side-by-side →

What to do with this record

Use Innovative Metals Company, INC.'s enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Innovative Metals Company, INC. against Riceland Foods, INC., a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Innovative Metals Company, INC.'s inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Innovative Metals Company, INC. safe to work at?
Based on OSHA records, Innovative Metals Company, INC.'s workplace safety record is concerning, with multiple serious compliance issues. The employer has 25 violations across 3 inspections, including 11 serious violations. Compared to Manufacturing industry peers, this is above average for penalties. Review the full inspection history below for details.
How many OSHA violations does Innovative Metals Company, INC. have?
Innovative Metals Company, INC. has 25 OSHA violations on record, including 11 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $41,118.
How many OSHA inspections has Innovative Metals Company, INC. had?
Innovative Metals Company, INC. has had 3 OSHA inspections, with the first recorded on 2015-10-01 and the most recent on 2023-05-09. This averages 8.3 violations per inspection.
What is the total penalty amount for Innovative Metals Company, INC.?
Innovative Metals Company, INC. has been assessed $41,118 in current OSHA penalties, reduced from an initial assessment of $98,133 (a 58.1% reduction).
Does Innovative Metals Company, INC. have any serious or willful violations?
Yes. Innovative Metals Company, INC. has 11 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Innovative Metals Company, INC. operate in?
Innovative Metals Company, INC. operates in the Manufacturing sector (NAICS code 332322). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Innovative Metals Company, INC. rank nationally on OSHA penalties?
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Innovative Metals Company, INC. ranks #6,749 (the top 10% of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Innovative Metals Company, INC.'s safety record compare to industry average?
Innovative Metals Company, INC.'s total OSHA penalty of $41,118 is above the Manufacturing industry average of $15,763 per employer (2.6x the average). The employer has 3 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Detotec North America, INC. in Sterling, CT is a similar manufacturing employer with $41,106 in current penalties.
Data Sources & Methodology

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 3 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.