PlainWorker
Employers › CA

Manufacturing · Philo, CA

I & E Lath Mill INC

According to OSHA enforcement records (2010–2026), I & E Lath Mill INC ranks #98,348 of 99,447 penalized U.S. employers by total current penalty, with a relatively clean safety record: 1 violations across 3 inspections.

Lower half by penalty0% serious
$150
OSHA penalties
1
Violations cited
3
OSHA inspections
#98,348
of 99,447 penalized employers

I & E Lath Mill INC in Philo, CA has been the subject of 3 OSHA workplace inspections and 1 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $150. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected I & E Lath Mill INC 3 times across a longer 11-year span, an infrequent cadence. These inspections resulted in 1 violation, averaging 0.3 per inspection, on the lighter side. According to OSHA enforcement records, its total current penalty ranks #98,348 of 99,447 penalized U.S. employers (the lower half of penalized employers nationally). Against the Manufacturing industry average of 3 inspections per employer, this sits roughly in line with peers (1.2x the sector average) on inspection frequency. For comparison, Smelter Service Corporation in Mount Pleasant, TN is another manufacturing employer with 2 OSHA inspections on record and $150 in current penalties.

0.3
violations per inspection
0.0%
of violations were serious
#98,348
of 99,447 penalized employers

Compliance score

B 85/100
  • B OSHA safety compliance: 1 violation across 3 OSHA inspections (0.3 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How I & E Lath Mill INC compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows I & E Lath Mill INC runs well below peers (0.01x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$150 Top 1% most affordable more affordable than 99% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). This entry sits in this band. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Above this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Above this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is I & E Lath Mill INC.

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both3.03.033.03.0018.436.755.173.5OSHA inspectionsViolations citedBUSHNELL ILLINOIS TA…, OSHA inspections: 3 · Violations cited: 35SPRINGCO METAL COATI…, OSHA inspections: 3 · Violations cited: 14CUISINE SOLUTIONS SA…, OSHA inspections: 3 · Violations cited: 9ARRINGTON SAWMILL, I…, OSHA inspections: 3 · Violations cited: 24EDAC TECHNOLOGIES CO…, OSHA inspections: 3 · Violations cited: 70MARATHON GALVESTON B…, OSHA inspections: 3 · Violations cited: 6BRIGGS & STRATTON CO…, OSHA inspections: 3 · Violations cited: 8GENERAL PLASTIC EXTR…, OSHA inspections: 3 · Violations cited: 18SORRENTO LACTALIS, I…, OSHA inspections: 3 · Violations cited: 18GENERAL ALUM NEW ENG…, OSHA inspections: 3 · Violations cited: 8CARLISLE PACKAGING C…, OSHA inspections: 3 · Violations cited: 13HDT EXPEDITIONARY SY…, OSHA inspections: 3 · Violations cited: 5WILLIAM H. HARVEY, OSHA inspections: 3 · Violations cited: 12PRECISION METAL PROD…, OSHA inspections: 3 · Violations cited: 18U.S. NONWOVENS CORP., OSHA inspections: 3 · Violations cited: 4HOHMANN & BARNARD, …, OSHA inspections: 3 · Violations cited: 3GSF PLASTICS CORPORA…, OSHA inspections: 3 · Violations cited: 11PRECISION IRON WORKS…, OSHA inspections: 3 · Violations cited: 31WASTE MANAGEMENT OF …, OSHA inspections: 3 · Violations cited: 15TITAN TUBE FABRICATORS, OSHA inspections: 3 · Violations cited: 9I & E Lath Mill INC, OSHA inspections: 3 · Violations cited: 1
I & E Lath Mill INC has 3 OSHA inspections on record and 1 violation cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

I & E Lath Mill INC in the Manufacturing enforcement ledger

Manufacturing sector: I & E Lath Mill INC is the #34,996 heaviest OSHA penalty carrier of 35,243 employers with nonzero fines ($150).

How I & E Lath Mill INC Compares

I & E Lath Mill INC's 0.33 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs well below peers (0.01x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

3

First Inspection

2015-03-25

Last Inspection

2026-06-02

Inspection Span

11 yrs

Violations / Inspection

0.3

Avg Penalty / Inspection

$50

Industry Avg / Inspection

$6,093

What this shows 3 inspections over 11 years, averaging 0.3 violations per visit. That's $50 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

0

Serious

0.0% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

1

Other-Than-Serious

100.0% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$150

Current Penalty Amount

$150

Penalty Reduction

None

What this shows No reduction on record. The current penalty matches the original OSHA assessment.

Industry Safety Context: Manufacturing

How I & E Lath Mill INC compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric I & E Lath Mill INC Industry Avg
Inspections 3 2.6
Violations 1 8.0
Total Penalty $150 $15,763
Avg Penalty per Inspection $50 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for I & E Lath Mill INC, both outside CA so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($150 here).

Puritan Magnetics INC $150 MI The Cool-Amp Conducto-Lube CO $150 OR Saginaw Knitting Mills INC $150 MI Smelter Service Corporation $150 TN

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (3 inspections here).

Bushnell Illinois Tank CO. D/B/a Schuld/Bushnell 3 insp. Valley, NE Springco Metal Coatings INC. 3 insp. Cleveland, OH Cuisine Solutions San Antonio 3 insp. San Antonio, TX Arrington Sawmill, INC. 3 insp. Jacksonville, TX

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Saginaw Knitting Mills INC
Freeland, MI
2 inspections $150
Smelter Service Corporation
Mount Pleasant, TN
2 inspections $150
Hermanos Rivera Windows CORP.
Cabo Rojo, PR
2 inspections $150
Alsico HI Tec, INC.
Chatsworth, CA
3 inspections $150
Flory Industries, INC.
Salida, CA
2 inspections $150

Compare I & E Lath Mill INC vs Saginaw Knitting Mills INC side-by-side →

What to do with this record

Use I & E Lath Mill INC's enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare I & E Lath Mill INC against Saginaw Knitting Mills INC, a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether I & E Lath Mill INC's inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is I & E Lath Mill INC safe to work at? ▼
Based on OSHA records, I & E Lath Mill INC's workplace safety record is relatively clean, with fewer violations than typical. The employer has 1 violations across 3 inspections. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does I & E Lath Mill INC have? ▼
I & E Lath Mill INC has 1 OSHA violations on record, including 0 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $150.
How many OSHA inspections has I & E Lath Mill INC had? ▼
I & E Lath Mill INC has had 3 OSHA inspections, with the first recorded on 2015-03-25 and the most recent on 2026-06-02. This averages 0.3 violations per inspection.
What is the total penalty amount for I & E Lath Mill INC? ▼
I & E Lath Mill INC has been assessed $150 in current OSHA penalties.
What industry does I & E Lath Mill INC operate in? ▼
I & E Lath Mill INC operates in the Manufacturing sector (NAICS code 321912). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does I & E Lath Mill INC rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, I & E Lath Mill INC ranks #98,348 (the lower half of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does I & E Lath Mill INC's safety record compare to industry average? ▼
I & E Lath Mill INC's total OSHA penalty of $150 is below the Manufacturing industry average of $15,763 per employer. The employer has 3 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Smelter Service Corporation in Mount Pleasant, TN is a similar manufacturing employer with $150 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 3 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.