PlainWorker
Employers › GA

Manufacturing · Hazlehurst, GA

Hazlehurst Quality Machine and Fabrication, INC.

According to OSHA enforcement records (2010–2026), Hazlehurst Quality Machine and Fabrication, INC. ranks #50,303 of 99,447 penalized U.S. employers by total current penalty, with a concerning safety record: 15 violations across 2 inspections.

Lower half by penalty80% serious
$6,000
OSHA penalties
15
Violations cited
2
OSHA inspections
#50,303
of 99,447 penalized employers

Hazlehurst Quality Machine and Fabrication, INC. in Hazlehurst, GA has been the subject of 2 OSHA workplace inspections and 15 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $6,000. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Hazlehurst Quality Machine and Fabrication, INC. 2 times over 1 year - more than twice a year on average. These inspections resulted in 15 violations, averaging 7.5 per inspection - a notably high rate. According to OSHA enforcement records, its total current penalty ranks #50,303 of 99,447 penalized U.S. employers (the lower half of penalized employers nationally). Of these, 12 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs moderately below peers (0.8x the sector average) on inspection frequency. For comparison, Charlotte Pipe and Foundry Company in Charlotte, NC is another manufacturing employer with 2 OSHA inspections on record and $6,000 in current penalties.

7.5
violations per inspection
80.0%
of violations were serious
#50,303
of 99,447 penalized employers

Compliance score

F 0/100
  • F OSHA safety compliance: 15 violations across 2 OSHA inspections (7.5 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How this employer compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Hazlehurst Quality Machine and Fabrication, INC. runs moderately below peers (0.4x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$6,000 Top 49% most affordable more affordable than 51% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). This entry sits in this band. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Above this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Hazlehurst Quality Machine and Fabrication, INC..

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both1.92.022.02.0012.124.136.248.2OSHA inspectionsViolations citedRED RIVER COMMODITIE…, OSHA inspections: 2 · Violations cited: 14TRINITY YACHTS, LLC, OSHA inspections: 2 · Violations cited: 23A.W.T. WORLD TRADE INC, OSHA inspections: 2 · Violations cited: 46DIMENSIONAL MACHINE …, OSHA inspections: 2 · Violations cited: 20WICO METAL PRODUCTS, OSHA inspections: 2 · Violations cited: 11TEXAS UNDERGROUND, I…, OSHA inspections: 2 · Violations cited: 22KOST USA LLC, OSHA inspections: 2 · Violations cited: 7DAY-LEE FOODS, INC., OSHA inspections: 2 · Violations cited: 5THE HARTY PRESS INC., OSHA inspections: 2 · Violations cited: 17BRITE BLAST LLC, OSHA inspections: 2 · Violations cited: 20IBC ENGINEERED MATER…, OSHA inspections: 2 · Violations cited: 20KDC ONE NORTHERN LABS, OSHA inspections: 2 · Violations cited: 6ISABELLE'S KITCHEN, …, OSHA inspections: 2 · Violations cited: 11METALICO ALUMINUM RE…, OSHA inspections: 2 · Violations cited: 37ASCEND PERFORMANCE M…, OSHA inspections: 2 · Violations cited: 2THE BUCKEYE STAMPING…, OSHA inspections: 2 · Violations cited: 9JOHN BLUDWORTH SHIPY…, OSHA inspections: 2 · Violations cited: 9CONSOLIDATED PRECISI…, OSHA inspections: 2 · Violations cited: 3ACCENT DISPLAY CORPO…, OSHA inspections: 2 · Violations cited: 20SADLER MACHINE CO INC, OSHA inspections: 2 · Violations cited: 7Hazlehurst Quality M…, OSHA inspections: 2 · Violations cited: 15
Hazlehurst Quality Machine and Fabrication, INC. has 2 OSHA inspections on record and 15 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Hazlehurst Quality Machine and Fabrication, INC. in the Manufacturing enforcement ledger

Among 35,243 Manufacturing employers with OSHA penalties on file, Hazlehurst Quality Machine and Fabrication, INC. ranks #21,311 at $6,000 current penalty.

How Hazlehurst Quality Machine and Fabrication, INC. Compares

Hazlehurst Quality Machine and Fabrication, INC.'s 7.50 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs moderately below peers (0.4x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

2

First Inspection

2015-02-25

Last Inspection

2015-03-26

Inspection Span

1 yr

Violations / Inspection

7.5

Avg Penalty / Inspection

$3,000

Industry Avg / Inspection

$6,093

What this shows 2 inspections over 1 year, averaging 7.5 violations per visit. That's $3,000 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

12

Serious

80.0% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

3

Other-Than-Serious

20.0% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$12,800

Current Penalty Amount

$6,000

Penalty Reduction

53.1%

What this shows Penalties were reduced by $6,800 from the initial assessment of $12,800. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Hazlehurst Quality Machine and Fabrication, INC. compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Hazlehurst Quality Machine and Fabrication, INC. Industry Avg
Inspections 2 2.6
Violations 15 8.0
Total Penalty $6,000 $15,763
Avg Penalty per Inspection $3,000 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Hazlehurst Quality Machine and Fabrication, INC., both outside GA so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($6,000 here).

RR Donnelley $6,000 IL Penntex Industries, INC. $6,000 TX Omni Manufacturing, INC. $6,000 OH Williams, White & Company $6,000 IL

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (2 inspections here).

Red River Commodities, INC. 2 insp. Fargo, ND Trinity Yachts, LLC 2 insp. Gulfport, MS A.W.T. World Trade INC 2 insp. Chicago, IL Dimensional Machine Works LLC 2 insp. Houston, TX

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Engineered Performance Polymers, LLC
Elgin, IL
3 inspections $6,000
T and B Tops
Jacksonville, NC
0 inspections $0
Timberline Hardwood Dimensions, INC.
Fulton, NY
2 inspections $6,000
Westport Shipyard INC
Westport, WA
2 inspections $6,000
Charlotte Pipe and Foundry Company
Charlotte, NC
2 inspections $6,000

Compare Hazlehurst Quality Machine and Fabrication, INC. vs Engineered Performance Polymers, LLC side-by-side →

What to do with this record

Use Hazlehurst Quality Machine and Fabrication, INC.'s enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Hazlehurst Quality Machine and Fabrication, INC. against Engineered Performance Polymers, LLC, a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Hazlehurst Quality Machine and Fabrication, INC.'s inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Hazlehurst Quality Machine and Fabrication, INC. safe to work at? ▼
Based on OSHA records, Hazlehurst Quality Machine and Fabrication, INC.'s workplace safety record is concerning, with multiple serious compliance issues. The employer has 15 violations across 2 inspections, including 12 serious violations. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does Hazlehurst Quality Machine and Fabrication, INC. have? ▼
Hazlehurst Quality Machine and Fabrication, INC. has 15 OSHA violations on record, including 12 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $6,000.
How many OSHA inspections has Hazlehurst Quality Machine and Fabrication, INC. had? ▼
Hazlehurst Quality Machine and Fabrication, INC. has had 2 OSHA inspections, with the first recorded on 2015-02-25 and the most recent on 2015-03-26. This averages 7.5 violations per inspection.
What is the total penalty amount for Hazlehurst Quality Machine and Fabrication, INC.? ▼
Hazlehurst Quality Machine and Fabrication, INC. has been assessed $6,000 in current OSHA penalties, reduced from an initial assessment of $12,800 (a 53.1% reduction).
Does Hazlehurst Quality Machine and Fabrication, INC. have any serious or willful violations? ▼
Yes. Hazlehurst Quality Machine and Fabrication, INC. has 12 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Hazlehurst Quality Machine and Fabrication, INC. operate in? ▼
Hazlehurst Quality Machine and Fabrication, INC. operates in the Manufacturing sector (NAICS code 332710). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Hazlehurst Quality Machine and Fabrication, INC. rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Hazlehurst Quality Machine and Fabrication, INC. ranks #50,303 (the lower half of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Hazlehurst Quality Machine and Fabrication, INC.'s safety record compare to industry average? ▼
Hazlehurst Quality Machine and Fabrication, INC.'s total OSHA penalty of $6,000 is below the Manufacturing industry average of $15,763 per employer. The employer has 2 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Charlotte Pipe and Foundry Company in Charlotte, NC is a similar manufacturing employer with $6,000 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 2 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.