PlainWorker
Employers › WI

Manufacturing · Green Bay, WI

Hart Design & MFG INC

According to OSHA enforcement records (2010–2026), Hart Design & MFG INC ranks #30,794 of 99,447 penalized U.S. employers by total current penalty, with a mixed safety record: 4 violations across 2 inspections.

Upper half by penalty100% serious
$11,640
OSHA penalties
4
Violations cited
2
OSHA inspections
#30,794
of 99,447 penalized employers

Hart Design & MFG INC in Green Bay, WI has been the subject of 2 OSHA workplace inspections and 4 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $11,640. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Hart Design & MFG INC 2 times over 3 years, roughly once every couple of years. These inspections resulted in 4 violations, averaging 2.0 per inspection, above what's typical for a single visit. According to OSHA enforcement records, its total current penalty ranks #30,794 of 99,447 penalized U.S. employers (the upper half of penalized employers nationally). Of these, 4 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs moderately below peers (0.8x the sector average) on inspection frequency. For comparison, Oilgear in Traverse City, MI is another manufacturing employer with 0 OSHA inspections on record and $0 in current penalties.

2.0
violations per inspection
100.0%
of violations were serious
#30,794
of 99,447 penalized employers

Compliance score

D 61/100
  • D OSHA safety compliance: 4 violations across 2 OSHA inspections (2.0 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How Hart Design & MFG INC compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Hart Design & MFG INC runs moderately below peers (0.7x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$11,640 Bottom 31% least affordable more affordable than 31% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Below this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). This entry sits in this band. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Hart Design & MFG INC.

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both1.92.022.02.00.58.516.524.532.5OSHA inspectionsViolations citedBSH HOME APPLIANCES …, OSHA inspections: 2 · Violations cited: 5HOMESTEADER, LLC, OSHA inspections: 2 · Violations cited: 29RAILTECH BOUTET, INC., OSHA inspections: 2 · Violations cited: 14ARCHER-DANIELS-MIDLA…, OSHA inspections: 2 · Violations cited: 5DS CONTAINERS, INC., OSHA inspections: 2 · Violations cited: 7PIONEER MAGNETICS, OSHA inspections: 2 · Violations cited: 7A A GIBBS LUMBER CO, OSHA inspections: 2 · Violations cited: 31VOYANT BEAUTY, OSHA inspections: 2 · Violations cited: 6TRANSWORLD PLASTIC F…, OSHA inspections: 2 · Violations cited: 5COMMERCIAL PLASTICS …, OSHA inspections: 2 · Violations cited: 15LINCOLN ELECTRIC COM…, OSHA inspections: 2 · Violations cited: 8SABERT CORPORATION, OSHA inspections: 2 · Violations cited: 7PENNSYLVANIA PRECISI…, OSHA inspections: 2 · Violations cited: 18WEYERHAEUSER COMPANY, OSHA inspections: 2 · Violations cited: 5CHAMELEON BEVERAGE C…, OSHA inspections: 2 · Violations cited: 2DELTA FAUCET COMPANY, OSHA inspections: 2 · Violations cited: 5UNVERFERTH MANUFACTU…, OSHA inspections: 2 · Violations cited: 5WILLIAMSBURG MANUFAC…, OSHA inspections: 2 · Violations cited: 7AVERY ABRASIVES, INC, OSHA inspections: 2 · Violations cited: 24PRIMETALS TECHNOLOGI…, OSHA inspections: 2 · Violations cited: 4Hart Design & MFG INC, OSHA inspections: 2 · Violations cited: 4
Hart Design & MFG INC has 2 OSHA inspections on record and 4 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Hart Design & MFG INC in the Manufacturing enforcement ledger

In Manufacturing, Hart Design & MFG INC sits at penalty rank #14,143 of 35,243 penalized establishments ($11,640 assessed).

How Hart Design & MFG INC Compares

Hart Design & MFG INC's 2.00 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs moderately below peers (0.7x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

2

First Inspection

2018-04-10

Last Inspection

2021-06-24

Inspection Span

3 yrs

Violations / Inspection

2.0

Avg Penalty / Inspection

$5,820

Industry Avg / Inspection

$6,093

What this shows 2 inspections over 3 years, averaging 2.0 violations per visit. That's $5,820 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

4

Serious

100.0% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

0

Other-Than-Serious

0.0% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$19,401

Current Penalty Amount

$11,640

Penalty Reduction

40.0%

What this shows Penalties were reduced by $7,761 from the initial assessment of $19,401. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Hart Design & MFG INC compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Hart Design & MFG INC Industry Avg
Inspections 2 2.6
Violations 4 8.0
Total Penalty $11,640 $15,763
Avg Penalty per Inspection $5,820 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Hart Design & MFG INC, both outside WI so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($11,640 here).

Iowa Mold Tooling CO. INC. $11,640 IA Calco Metal Works, INC. $11,640 TX Ventana USA $11,641 PA Bartlett Milling Company, L.P. $11,641 KS

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (2 inspections here).

BSH Home Appliances Corporation 2 insp. Jacksboro, TN Homesteader, LLC 2 insp. New Tazewell, TN Railtech Boutet, INC. 2 insp. Napoleon, OH Archer-Daniels-Midland Company 2 insp. Lubbock, TX

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Iowa Mold Tooling CO. INC.
Garner, IA
2 inspections $11,640
Calco Metal Works, INC.
Lubbock, TX
2 inspections $11,640
Gulf Coast Wilbert Inc.
Crestview, FL
0 inspections $0
Oilgear
Traverse City, MI
0 inspections $0
Bartlett Milling Company, L.P.
Coffeyville, KS
3 inspections $11,641

Compare Hart Design & MFG INC vs Iowa Mold Tooling CO. INC. side-by-side →

What to do with this record

Use Hart Design & MFG INC's enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Hart Design & MFG INC against Iowa Mold Tooling CO. INC., a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Hart Design & MFG INC's inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Hart Design & MFG INC safe to work at? ▼
Based on OSHA records, Hart Design & MFG INC's workplace safety record is mixed, with some compliance concerns. The employer has 4 violations across 2 inspections, including 4 serious violations. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does Hart Design & MFG INC have? ▼
Hart Design & MFG INC has 4 OSHA violations on record, including 4 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $11,640.
How many OSHA inspections has Hart Design & MFG INC had? ▼
Hart Design & MFG INC has had 2 OSHA inspections, with the first recorded on 2018-04-10 and the most recent on 2021-06-24. This averages 2.0 violations per inspection.
What is the total penalty amount for Hart Design & MFG INC? ▼
Hart Design & MFG INC has been assessed $11,640 in current OSHA penalties, reduced from an initial assessment of $19,401 (a 40.0% reduction).
Does Hart Design & MFG INC have any serious or willful violations? ▼
Yes. Hart Design & MFG INC has 4 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Hart Design & MFG INC operate in? ▼
Hart Design & MFG INC operates in the Manufacturing sector (NAICS code 333241). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Hart Design & MFG INC rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Hart Design & MFG INC ranks #30,794 (the upper half of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Hart Design & MFG INC's safety record compare to industry average? ▼
Hart Design & MFG INC's total OSHA penalty of $11,640 is below the Manufacturing industry average of $15,763 per employer. The employer has 2 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Oilgear in Traverse City, MI is a similar manufacturing employer with $0 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 2 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.