PlainWorker
Employers › FL

Manufacturing · Tallahassee, FL

Gulf Atlantic Culvert CO, INC.

According to OSHA enforcement records (2010–2026), Gulf Atlantic Culvert CO, INC. ranks #33,148 of 99,447 penalized U.S. employers by total current penalty, with a concerning safety record: 15 violations across 2 inspections.

Upper half by penalty40% serious
$10,695
OSHA penalties
15
Violations cited
2
OSHA inspections
#33,148
of 99,447 penalized employers

Gulf Atlantic Culvert CO, INC. in Tallahassee, FL has been the subject of 2 OSHA workplace inspections and 15 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $10,695. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Gulf Atlantic Culvert CO, INC. 2 times across a longer 5-year span, an infrequent cadence. These inspections resulted in 15 violations, averaging 7.5 per inspection - a notably high rate. According to OSHA enforcement records, its total current penalty ranks #33,148 of 99,447 penalized U.S. employers (the upper half of penalized employers nationally). Of these, 6 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs moderately below peers (0.8x the sector average) on inspection frequency. For comparison, Omega Welding and Fabrication, Inc. in Florence, AL is another manufacturing employer with 0 OSHA inspections on record and $0 in current penalties.

7.5
violations per inspection
40.0%
of violations were serious
#33,148
of 99,447 penalized employers

Compliance score

F 0/100
  • F OSHA safety compliance: 15 violations across 2 OSHA inspections (7.5 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How Gulf Atlantic Culvert CO, INC. compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Gulf Atlantic Culvert CO, INC. runs moderately below peers (0.7x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$10,695 Bottom 33% least affordable more affordable than 33% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Below this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). This entry sits in this band. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Gulf Atlantic Culvert CO, INC..

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both1.92.022.02.0012.825.738.551.4OSHA inspectionsViolations citedSMITHFIELD FARMLAND …, OSHA inspections: 2 · Violations cited: 49AMERICARB, INC., OSHA inspections: 2 · Violations cited: 13GOODWIN AMMONIA COMP…, OSHA inspections: 2 · Violations cited: 21STRAEHLE + HESS USA …, OSHA inspections: 2 · Violations cited: 10ALADDIN PACKAGING, OSHA inspections: 2 · Violations cited: 13GERDAU AMERISTEEL SA…, OSHA inspections: 2 · Violations cited: 11SAFESTWAY LABOR FORC…, OSHA inspections: 2 · Violations cited: 5O.K. INDUSTRIES, INC., OSHA inspections: 2 · Violations cited: 21KYOCERA INDUSTRIAL C…, OSHA inspections: 2 · Violations cited: 25DYNO NOBEL INC., OSHA inspections: 2 · Violations cited: 9CROFT, LLC, OSHA inspections: 2 · Violations cited: 19FELBRO FOOD PRODUCTS…, OSHA inspections: 2 · Violations cited: 9ICELANDIRECT LLC, OSHA inspections: 2 · Violations cited: 2ER SNELL CONTRACTOR,…, OSHA inspections: 2 · Violations cited: 8NEW HORIZONS BAKING …, OSHA inspections: 2 · Violations cited: 5BREWSTER CHEESE, INC., OSHA inspections: 2 · Violations cited: 5ORIENT & FLUME ART G…, OSHA inspections: 2 · Violations cited: 7YARNELL OPERATIONS, …, OSHA inspections: 2 · Violations cited: 3THE ELECTRODYNE COMP…, OSHA inspections: 2 · Violations cited: 14ITW GRAPHICS, OSHA inspections: 2 · Violations cited: 10Gulf Atlantic Culver…, OSHA inspections: 2 · Violations cited: 15
Gulf Atlantic Culvert CO, INC. has 2 OSHA inspections on record and 15 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Gulf Atlantic Culvert CO, INC. in the Manufacturing enforcement ledger

In Manufacturing, Gulf Atlantic Culvert CO, INC. sits at penalty rank #15,072 of 35,243 penalized establishments ($10,695 assessed).

How Gulf Atlantic Culvert CO, INC. Compares

Gulf Atlantic Culvert CO, INC.'s 7.50 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs moderately below peers (0.7x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

2

First Inspection

2014-10-08

Last Inspection

2019-06-07

Inspection Span

5 yrs

Violations / Inspection

7.5

Avg Penalty / Inspection

$5,348

Industry Avg / Inspection

$6,093

What this shows 2 inspections over 5 years, averaging 7.5 violations per visit. That's $5,348 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

6

Serious

40.0% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

9

Other-Than-Serious

60.0% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$18,671

Current Penalty Amount

$10,695

Penalty Reduction

42.7%

What this shows Penalties were reduced by $7,976 from the initial assessment of $18,671. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Gulf Atlantic Culvert CO, INC. compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Gulf Atlantic Culvert CO, INC. Industry Avg
Inspections 2 2.6
Violations 15 8.0
Total Penalty $10,695 $15,763
Avg Penalty per Inspection $5,348 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Gulf Atlantic Culvert CO, INC., both outside FL so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($10,695 here).

TH Foods, INC. $10,695 IL Stonepeak Ceramics INC. $10,695 TN Wescott Steel INC. $10,695 PA Anco Engineering, INC. $10,694 CT

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (2 inspections here).

Smithfield Farmland CORP. 2 insp. Tar Heel, NC Americarb, INC. 2 insp. Ashland, OH Goodwin Ammonia Company 2 insp. Lawrenceville, GA Straehle + Hess USA INC. 2 insp. Auburn, AL

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

TH Foods, INC.
Loves Park, IL
4 inspections $10,695
Stonepeak Ceramics INC.
Crossville, TN
4 inspections $10,695
Wescott Steel INC.
Trevose, PA
4 inspections $10,695
Omega Welding and Fabrication, Inc.
Florence, AL
0 inspections $0
Anco Engineering, INC.
Shelton, CT
3 inspections $10,694

Compare Gulf Atlantic Culvert CO, INC. vs TH Foods, INC. side-by-side →

What to do with this record

Use Gulf Atlantic Culvert CO, INC.'s enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Gulf Atlantic Culvert CO, INC. against TH Foods, INC., a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Gulf Atlantic Culvert CO, INC.'s inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Gulf Atlantic Culvert CO, INC. safe to work at? ▼
Based on OSHA records, Gulf Atlantic Culvert CO, INC.'s workplace safety record is concerning, with multiple serious compliance issues. The employer has 15 violations across 2 inspections, including 6 serious violations. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does Gulf Atlantic Culvert CO, INC. have? ▼
Gulf Atlantic Culvert CO, INC. has 15 OSHA violations on record, including 6 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $10,695.
How many OSHA inspections has Gulf Atlantic Culvert CO, INC. had? ▼
Gulf Atlantic Culvert CO, INC. has had 2 OSHA inspections, with the first recorded on 2014-10-08 and the most recent on 2019-06-07. This averages 7.5 violations per inspection.
What is the total penalty amount for Gulf Atlantic Culvert CO, INC.? ▼
Gulf Atlantic Culvert CO, INC. has been assessed $10,695 in current OSHA penalties, reduced from an initial assessment of $18,671 (a 42.7% reduction).
Does Gulf Atlantic Culvert CO, INC. have any serious or willful violations? ▼
Yes. Gulf Atlantic Culvert CO, INC. has 6 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Gulf Atlantic Culvert CO, INC. operate in? ▼
Gulf Atlantic Culvert CO, INC. operates in the Manufacturing sector (NAICS code 332322). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Gulf Atlantic Culvert CO, INC. rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Gulf Atlantic Culvert CO, INC. ranks #33,148 (the upper half of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Gulf Atlantic Culvert CO, INC.'s safety record compare to industry average? ▼
Gulf Atlantic Culvert CO, INC.'s total OSHA penalty of $10,695 is below the Manufacturing industry average of $15,763 per employer. The employer has 2 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Omega Welding and Fabrication, Inc. in Florence, AL is a similar manufacturing employer with $0 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 2 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.