PlainWorker
Employers › PA

Manufacturing · Pittston, PA

GT Fabrication, INC.

According to OSHA enforcement records (2010–2026), GT Fabrication, INC. ranks #21,474 of 99,447 penalized U.S. employers by total current penalty, with a concerning safety record: 17 violations across 3 inspections.

Top 25% by penalty71% serious
$16,717
OSHA penalties
17
Violations cited
3
OSHA inspections
#21,474
of 99,447 penalized employers

GT Fabrication, INC. in Pittston, PA has been the subject of 3 OSHA workplace inspections and 17 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $16,717. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected GT Fabrication, INC. 3 times across a longer 8-year span, an infrequent cadence. These inspections resulted in 17 violations, averaging 5.7 per inspection - a notably high rate. According to OSHA enforcement records, its total current penalty ranks #21,474 of 99,447 penalized U.S. employers (the top quarter of penalized employers nationally). Of these, 12 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this sits roughly in line with peers (1.2x the sector average) on inspection frequency. For comparison, Denco Aluminum, INC. in Girard, KS is another manufacturing employer with 2 OSHA inspections on record and $16,714 in current penalties.

5.7
violations per inspection
70.6%
of violations were serious
#21,474
of 99,447 penalized employers

Compliance score

F 8/100
  • F OSHA safety compliance: 17 violations across 3 OSHA inspections (5.7 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How GT Fabrication, INC. compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows GT Fabrication, INC. sits roughly in line with peers (1.1x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$16,717 Bottom 22% least affordable more affordable than 22% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Below this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Below this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). This entry sits in this band. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is GT Fabrication, INC..

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both3.03.033.03.02.411.22028.837.6OSHA inspectionsViolations citedART STONE-GRANITE & …, OSHA inspections: 3 · Violations cited: 19MARIETTA CORPORATION, OSHA inspections: 3 · Violations cited: 30INLAND EMPIRE TRUSS,…, OSHA inspections: 3 · Violations cited: 19DALTON CORPORATION, OSHA inspections: 3 · Violations cited: 13OLD CASTLE APG NORTH…, OSHA inspections: 3 · Violations cited: 9C.W. BROWN FOODS, INC., OSHA inspections: 3 · Violations cited: 11WHITESELL CORPORATION, OSHA inspections: 3 · Violations cited: 18C & B LUMBER, OSHA inspections: 3 · Violations cited: 7IRONFORM, OSHA inspections: 3 · Violations cited: 8RUBBER DEVELOPMENT I…, OSHA inspections: 3 · Violations cited: 36O. C. KECKLEY COMPANY, OSHA inspections: 3 · Violations cited: 25GEMINI GROUP, INC., OSHA inspections: 3 · Violations cited: 7BLOOMFIELD BAKERS DB…, OSHA inspections: 3 · Violations cited: 4ACTAGRO, LLC, OSHA inspections: 3 · Violations cited: 10UNIFIED CML LLC, OSHA inspections: 3 · Violations cited: 12SHAKESPEARE COMPOSIT…, OSHA inspections: 3 · Violations cited: 18FLEXCO CORPORATION, OSHA inspections: 3 · Violations cited: 5ARA FOOD CORPORATION, OSHA inspections: 3 · Violations cited: 16COASTAL FLANGE, INC., OSHA inspections: 3 · Violations cited: 13SCHANTZ MFG INC., OSHA inspections: 3 · Violations cited: 14GT Fabrication, INC., OSHA inspections: 3 · Violations cited: 17
GT Fabrication, INC. has 3 OSHA inspections on record and 17 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

GT Fabrication, INC. in the Manufacturing enforcement ledger

In Manufacturing, GT Fabrication, INC. sits at penalty rank #10,236 of 35,243 penalized establishments ($16,717 assessed).

How GT Fabrication, INC. Compares

GT Fabrication, INC.'s 5.67 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty sits roughly in line with peers (1.1x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

3

First Inspection

2015-05-12

Last Inspection

2022-12-08

Inspection Span

8 yrs

Violations / Inspection

5.7

Avg Penalty / Inspection

$5,572

Industry Avg / Inspection

$6,093

What this shows 3 inspections over 8 years, averaging 5.7 violations per visit. That's $5,572 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

12

Serious

70.6% of total

0

Willful

0.0% of total

1

Repeat

5.9% of total

4

Other-Than-Serious

23.5% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$23,093

Current Penalty Amount

$16,717

Penalty Reduction

27.6%

What this shows Penalties were reduced by $6,376 from the initial assessment of $23,093. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How GT Fabrication, INC. compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric GT Fabrication, INC. Industry Avg
Inspections 3 2.6
Violations 17 8.0
Total Penalty $16,717 $15,763
Avg Penalty per Inspection $5,572 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for GT Fabrication, INC., both outside PA so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($16,717 here).

Advanced Laser Machining, INC. $16,715 WI Denco Aluminum, INC. $16,714 KS AC, INC. $16,720 AL Florence Casket Company $16,710 MA

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (3 inspections here).

Art Stone-Granite & Marble, INC. 3 insp. Marietta, GA Marietta Corporation 3 insp. Cortland, NY Inland Empire Truss, INC. 3 insp. Perris, CA Dalton Corporation 3 insp. Warsaw, IN

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Advanced Laser Machining, INC.
Spooner, WI
2 inspections $16,715
Denco Aluminum, INC.
Girard, KS
2 inspections $16,714
AC, INC.
Huntsville, AL
2 inspections $16,720
Florence Casket Company
Florence, MA
2 inspections $16,710
Dynojet Research, INC.
Belgrade, MT
2 inspections $16,724

Compare GT Fabrication, INC. vs Advanced Laser Machining, INC. side-by-side →

What to do with this record

Use GT Fabrication, INC.'s enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare GT Fabrication, INC. against Advanced Laser Machining, INC., a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether GT Fabrication, INC.'s inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is GT Fabrication, INC. safe to work at? ▼
Based on OSHA records, GT Fabrication, INC.'s workplace safety record is concerning, with multiple serious compliance issues. The employer has 17 violations across 3 inspections, including 12 serious violations. Compared to Manufacturing industry peers, this is above average for penalties. Review the full inspection history below for details.
How many OSHA violations does GT Fabrication, INC. have? ▼
GT Fabrication, INC. has 17 OSHA violations on record, including 12 serious, 0 willful, and 1 repeat violations. The total current penalty amount is $16,717.
How many OSHA inspections has GT Fabrication, INC. had? ▼
GT Fabrication, INC. has had 3 OSHA inspections, with the first recorded on 2015-05-12 and the most recent on 2022-12-08. This averages 5.7 violations per inspection.
What is the total penalty amount for GT Fabrication, INC.? ▼
GT Fabrication, INC. has been assessed $16,717 in current OSHA penalties, reduced from an initial assessment of $23,093 (a 27.6% reduction).
Does GT Fabrication, INC. have any serious or willful violations? ▼
Yes. GT Fabrication, INC. has 12 serious violations, and 1 repeat violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does GT Fabrication, INC. operate in? ▼
GT Fabrication, INC. operates in the Manufacturing sector (NAICS code 332312). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does GT Fabrication, INC. rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, GT Fabrication, INC. ranks #21,474 (the top quarter of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does GT Fabrication, INC.'s safety record compare to industry average? ▼
GT Fabrication, INC.'s total OSHA penalty of $16,717 is above the Manufacturing industry average of $15,763 per employer (1.1x the average). The employer has 3 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Denco Aluminum, INC. in Girard, KS is a similar manufacturing employer with $16,714 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 3 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.